Availability
23 Results Found For "turn"
Showing In Stock Items. Show All 27 Items.
Diode Dynamics Tail As Turn Plus Backup Modules
Diode Dynamics Tail as Turn plus backup modules can add much more visibility when putting your car in reverse. These plug-and-play units not only illuminate your main tail lamps as both brake and turn signals, but also permit you to convert the old turn signal socket to an extra backup light. Put your modern LED tail lamps to full use and eliminate the incandescent turn signals for a much cleaner look on the road, plus have the option of extreme reverse lighting with Diode Dynamics Tail as Turn plus backup modules. They are made with OEM-size connectors for many makes and models. Order the kit designed for your vehicle.
Not Yet Reviewed
$119.95
—
$169.95
Diode Dynamics Tail As Turn Modules
Diode Dynamics Tail as Turn modules are plug-and-play units that illuminate your main tail lamps as both brake and turn signals. Now you can put your modern LED tail lamps to full use, and eliminate the incandescent turn signals for a much cleaner look on the road, day and night. Diode Dynamics Tail as Turn modules are made with OEM-size connectors for many Subaru, Infiniti, Nissan, Hyundai, and Toyota models. They also offer DIY modules for vehicles they have not made kits for yet.
Not Yet Reviewed
$79.95
DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 3 )
$869.99
Z Automotive Jeep Wrangler JL Tazer Mini Programmers
Z Automotive Jeep Wrangler JL Tazer mini programmers allow you to pull all the same great features out of your Jeep as the JL lite programmers do—and many more. They plug into your vehicle's SGW module, after which, your steering wheel buttons control all the functions. These programmers unlock features the let you enable/disable for things like a backup camera, daytime running light Dropout function, factory fog lights, factory halo lights, One-touch lane change, and more. Additional features: * Change headlight, fog light, taillight, and turn signal type from standard to LED * Enable/disable trailer tow setting * Enable/disable blind spot detection * Enable/disable change ParkSense configuration * Disable front and rear lockers for axle swaps * Disable front axle disconnect module for axle swaps
( 7 )
$329.00
Manufacturer Rebate
AutoMeter InVision 8.8 in. LCD Dashes
AutoMeter InVision 8.8 in. LCD Dash delivers a clean, modern instrument solution for a wide range of custom, retromod, and performance applications. Featuring a high-resolution 8.8 in. LCD display, it consolidates essential vehicle information into a single, easy-to-read interface designed to complement any interior style. Built for flexibility, the InVision 8.8 in. LCD Dash supports a broad range of drivetrains and sensor configurations, making it ideal for custom installations and aftermarket builds. With intuitive customization, integrated indicators, and trusted AutoMeter engineering, it provides modern digital functionality without limiting your design or layout choices. Features: * Monitors speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in a high resolution and colorful display * 8.8" LCD display with five user selectable screens and color customization *High beam & turn signal indicators as well as user selectable warning light * All kits include a wiring harness and sending units for water temperature and oil pressure as well as a joystick for dash customization * Adjustable RPM range and displays in imperial or metric measurements * Helps protect your vehicle with visual and audible alarms - low fuel level/oil pressure/voltage and high-water temperature * Speedometer easily calibrates to OEM or aftermarket vehicle speed sensors and the tachometer is capable of calibrating to many engine types * 7 user-selectable fuel level resistance ranges to pair with original and aftermarket sending units * Tachometer capable of calibrating for 1-, 2-, 3-, 4-, 5-, 6-, 8-, 10-, or 12-cylinder engines
Not Yet Reviewed
$1,189.99
On Sale
Range Technology Auto Stop/Start Disabler Devices
Range Technology Auto Stop/Start disabler devices end the annoying engine stop and restart at lights. And they are fast and easy to setup. Simply plug the disabler into your onboard OBD-II port and it instantly begins working to eliminate the Auto Start/Stop system. Benefits and features of Range Auto Stop/Start disablers: * No special tools needed to install or remove/uninstall * Patented technology will disable Start/Stop without reprogramming your ECU * No more hesitation when restarting after stopping in traffic * Saves on costly repair bills in the future by turning off Start/Stop * Safe and reversible to use; leaves no trace--unplug it to return to factory settings
( 26 )
$210.95
—
$255.95
$189.85
—
$230.35
Z Automotive Tazer DT Programmers
Z Automotive Tazer DT programmers unlock factory features by merely unplugging the SGW module and plugging the Tazer DT in its place. These programmers allow you to adjust your vehicle settings for tire size, gear ratio, and transfer case low ratio. They also have "live" functions like auto start/stop disable, auto tow mode, Light Show mode, Cooldown mode, and Line Lock mode. Unlock your trucks factory potential with Z Automotive Tazer DT programmers. Some of the many other product features include: * Dark mode turns off all exterior lighting and radio display while parked with the engine running * Rock crawl mode locks all four brakes by pressing steering wheel buttons to hold the vehicle still * Winch mode raises idle 2,000 rpm with a simple button press * "Clear CELs" resets the check engine light * 0 to 30 and 0 to 60 display timers * Enable/disable TravelLink/XM traffic and weather * Enable/disable One-touch lane change * Enable/disable TPMS system
( 4 )
$329.00
Hypertech Max Energy Power Programmers
Hypertech's Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable. Additional features (depending on the vehicle application) include: * Raise the top-speed limiter to match the speed rating of high performance tires * Raise the engine's rpm limiter for increased performance * Adjust individual automatic transmission shift points and shift firmness * Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes * Lower the cooling fan on/off temperatures to match the thermostat rating * Read and clear diagnostic trouble codes and turn off "check engine" lights * Ability to adjust settings or go back to stock calibration at any time
( 132 )
$399.95
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
Edge EZ Modules with Insight CTS3
Edge EZ modules with Insight CTS3 provide plug-in power that is almost like having a full-time pit crew on the dash! Want more pull, better throttle response, and real-time visibility without turning your truck into a science project? These modules combine plug-and-play performance with a 5 in. touchscreen monitor so you can add power and keep tabs on the vitals at the same time. They are designed to install using factory-style connections with no cutting/splicing and no complicated tuning, and capable of returning the vehicle to stock status when removed with no ECM flash footprint. The full-color touchscreen plugs into the OBD-II port with no wiring required, displays dozens of parameters, and lets you swipe between screens. You can use the built-in performance testing (0-60, 1/4-mile), do Wi-Fi updating, data logging, and get alerts to help protect your ride when temperatures or pressures climb. Whether you are towing, commuting, or playing, Edge EZ Modules with Insight CTS3 help you dial it in and keep it in check. More product features and notes include: * Most EZ applications offer multiple power levels you can adjust on-the-fly through the Edge smartphone app, plus an adjustable throttle booster so you can tailor pedal feel for towing, commuting, or weekend fun * Diesel-friendly monitoring features like manual DPF regen and live data monitoring on supported applications * Power gains, power levels, included mounts, and emissions legality vary by application; check the specific part number for details and any CARB EO/compliance notes
Not Yet Reviewed
$1,013.95
JET Performance Programmers
JET Performance programmers let you take control and program your own vehicle computer to match your driving style. JET's exclusive Tri-Power tuning allows you to program for performance using lower cost regular octane fuel, or for optimal performance gains you can program for mid-grade or premium fuels. All three tuning modes are designed to operate the engine at peak efficiency based on the octane level being used to improve horsepower and mileage. The programmer will also correct your speedometer and turn off the ABS system trouble light if you change tire size or gear ratios. JET Performance programmers include a built-in scan tool to read and clear diagnostic trouble codes when your check engine light comes on saving you a costly trip to the dealer. The programmer simply plugs into the vehicle's diagnostic port under the dash and then the easy to use installation software allows you to make your changes by answering simple yes or no questions.
( 40 )
$369.99
—
$399.99
HP Tuners Diesel Switches
HP Tuners diesel switches let you power up from a stock calibration to one of five custom maps with the turn of a switch. These 6-position rotary switches feature knurled aluminum knob and position dial, and 5 ft. OBDII pass-through cable. With the optional OBDII port brackets (sold separately), the switch mounting possibilities in your truck's cabin are many, and for complete control and performance, pair your diesel switch with HP Tuners Switch on-the-Fly (sold separately).
( 1 )
$79.99
FAST MAP Sensors
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$131.95
Z Automotive Jeep Wrangler JK Blaster Programmers
Unlock the full potential of your Jeep Wrangler JK with Z Automotive Jeep Wrangler JK Blaster programmers. The Z Automotive Jeep Wrangler JK Blaster programmers are a step ahead by allowing you to use intuitive applications through Android and IOS. You can make all changes right from your phone or tablet once the programmer is plugged-in. You won't have to worry about dead batteries when you leave the programmer plugged-in with sleep mode the programmers turns off automatically with the vehicle. Every Blaster programmer is also Wi-Fi and Bluetooth capable for added convenience. Z Automotive is always striving to improve upon your programmers features, so any new online update is free to download onto your programmer. Z Automotive Jeep Wrangler JK Blaster programmers features: * Adjustment for different tire sizes * Change gear ratio when new gears are installed * Change the transfer case ratio when a different case is installed * Modify or disable TPMS tire settings * One-touch-lane enable or disable * Back-up camera enable for MyGig radio * Lock axles on demand for Rubicon models * Line lock * Light show setting flashes all exterior lights * Winch mode allows you to change the idle * Read and clear all DTC codes * Free online updates * Wi-Fi and Bluetooth capable
( 1 )
$189.00
On Sale
Superchips Ford Bronco Flashcal Tuners
Here's a device to help calibrate your truck's computer for your large aftermarket tires and more! Superchips Ford Bronco Flashcal tuners offer valuable features and calibration tools to truck owners at an economical price. Superchips Ford Bronco Flashcal Tuners feature: * Speedometer adjust for tire size 28.25 - 36.25 in. * Fog lights: enable "Bambi Mode" for simultaneous use of fog lights with high-beams * Headlamps position setting: option for headlamps to return to "Auto Lamps" or remain at last known position * Auto lights delay: duration headlights illuminate after driver exit, 0, 5, 10, 20, 60, or 120 s * Daytime running light disable or enable * TPMS disable, for off-road wheels and tires * Independent TPMS threshold: front and rear axles can be set differently from 1- 90 psi * Auto Start/Stop disable: remains off with every restart, and can be reenabled with the Flashcal any time * Silent Mode: turns off most cabin and exterior lights, and door chime with open door, ignition chime remains * Honk Warning Disable: 2-honk warning when driver exits running vehicle with key fob * Lock Feedback Lights: enables hazard blink with unlock command * Auto Unlock: vehicle unlocks with ignition off * Auto Lock: disables factory setting to lock doors when vehicle is in motion * Auto Relock: disables factory setting to re-lock doors 45 seconds after unlocking * Remote Unlock: option to trigger all doors or just driver door * Remote Start: selects engine run time duration for 0, 5, 10, 15 mins
Not Yet Reviewed
$237.95
$214.15
On Sale
Edge EAS Power Switch Kits
Edge EAS power switch kits are a tremendous new feature for truck owners. Customers can now hook up accessories like aftermarket lights, air compressors, etc., and engage them from their CTS/CTS2 device. Install the new switch and either use the Edge MyStyle software to name your accessory—or with the CTS2 to rename those accessories right from your device. The CTS2 comes with an all-new screen layout that can monitor up to six gauges and four rocker switches for the ultimate control. Take advantage of Edge's clean EAS daisy chain link system to turn your truck's tools on/off.
( 2 )
$163.95
$147.55
Chevrolet Performance LS427/570 Engine Controller Kits
Chevrolet Performance controllers are uniquely calibrated for installation in older vehicles—unlike the controllers from regular-production vehicles. That means many features required for late-model production vehicles are "turned off" because they are not required in older cars and trucks. This helps to prevent the unnecessary triggering of diagnostic trouble codes that could possibly affect performance or require additional calibration adjustments. These engine controller kits are designed exclusively for Chevrolet LS427 570 horsepower wet sump LS7 crate engines. If you have a late model Chevy, you'll want this kit! The kit includes: * Engine controller * Wiring harness * Mass airflow meter * Throttle pedal assembly * Oxygen sensors
Not Yet Reviewed
$1,920.24
On Sale
Superchips Pulsar XT Ford Bronco Computer Programmers
Superchips Pulsar XT Ford Bronco computer programmers control the following features: * Amber DRLs: This allows you to use the amber lights as your daytime running lights and turn signals. Stock, they are used only as turn signals. NOTE: DRLs will not be amber when your high beams or low beams are on. * Auto Start Stop Disable: Disables or enables the auto start/stop system on vehicles already equipped with it. * Battery Management System: Disables BMS. This will allow the battery to charge above the preset threshold. The vehicle will no longer warn you if your battery is getting low due to your headlights or radio being on. The side effect of disabling this system is the auto start stop system will also be disabled. * Dark Mode: Interior lights will remain off when the doors are opened. * Daytime Running Lights: Enable/disable DRLs * DTC Read/Clear: Feature will scan vehicle for Diagnostic Trouble Codes and report any found. Clear command will delete any present codes in the system * Emissions Readiness: This feature will check the current status of the vehicle's emissions readiness monitors. * Fog Lights with High Beams: Enables fog lights to stay on with high beams. * Headlamp Switch: The stock setting is for the vehicle to put the headlamp switch to "auto" when the vehicle is turned on. This will allow the vehicle to remember the previous setting after a key cycle. * Honk Warning: No longer honks if you leave the vehicle with the key if the engine is running. * Remote Start Duration: Change duration to 0, 5, 10, or 15 minutes. * Tire Size: Allows speedometer and odometer calibration for tire size changes up to 37 in. tall (36.25 in. measured). For most accurate results, measure tire height mounted on vehicle with a tape measure and input that reading, not what is printed on tire sidewall. * TPMS Adjust: Allows factory TPMS warning threshold to be adjusted between 1-99 psi. Use this feature if you want to run lower than factory tire pressure * TPMS Disable: This feature will completely turn off the TPMS system. Use when running below 25 psi or if tires are no longer equipped with TPMS sensors.
( 1 )
$687.95
$618.95
Bully Dog ECM Diesel Tuners
Bully Dog ECM diesel tuners are designed to be stowed away after installation--simply set 'em and forget 'em. These powerful controlling devices are preloaded with three high performance, dyno-proven tunes that increase horsepower, torque, and fuel economy. They're built with simple, easy-to-use performance in mind, and can also read and clear diagnostic trouble codes. Give your rig the ability to tackle any challenge along the route with Bully Dog ECM diesel tuners. Features and specs: * Idle shutdown timer sets length of time vehicle will idle until the engine turns off to save fuel and extend the life of the turbo by allowing it to cool down before engine shutoff * Increase and decrease the set limit of the vehicle's cruise control saving time and money when crossing borders. * Speed limiter can be adjusted to automatically limit engine power * 75 to 100 hp gains possible in power mode * Free internet updates help assure that you always have the latest files for your vehicle * Fuel savings up to 12 percent and longer engine life * Adjustable options vary for each vehicle and are not available on all vehicles
( 1 )
$849.00
AiM Sports MXP 1.3 Strada Data Loggers with Street Icons
The AiM MXP 1.3 Strada with Street Icons data loggers combine a high-contrast TFT display with essential road-legal indicators (turn signals, high beams, oil) and advanced data logging capabilities. They replace standard gauges, offering customizable dashboards, ECU connectivity, and configurable RGB alarms for both street and track performance. The MXP 1.3 Strada data loggers are ideal for daily driven performance cars, track-day vehicles, or for use in modernizing older instrument clusters. Key benefits of the MXP 1.3 Strada with Street Icons: * Dual functionality—the "Street Icons" allow you to wire analog inputs to simulate traditional vehicle warning lights, such as hazard lights, high beams, and turn signals, making it ideal for road-going or dual-purpose vehicles * Superior visibility—with 6-inch TFT screen offers 50 percent more display area than 5-inch screens and includes an ambient light sensor to automatically adjust brightness * Customizable alarms and shift lights—includes 5 (standard) or 6 (1.3 model) configurable RGB alarm LEDs and a 10-LED shift light array, so you can set custom colors, flashing frequencies, and accompanying text messages for each alarm * Massive ECU compatibility—can support over 2,000 industry-leading ECUs via CAN, RS232, or K-Line connections; this allows you to display dozens of channels (RPM, speed, water temperature, oil pressure, gear) with as few as two cable connections * Expandable system, while the Strada itself is a display-only unit (it does not log data natively), it can be upgraded to a full data logger by adding the AiM Strada Logger kit (sold separately); unit also supports expansions like the GPS09c module for track mapping and SmartyCam for video overlays * Camera integration—features two analog camera inputs, allowing the display to function as a rearview mirror or backup camera triggered by a button or specific event
Not Yet Reviewed
$1,499.00
On Sale
Range Technology AFM/DFM Disabler Devices
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 72 )
$265.95
$239.35
On Sale
Superchips Flashpaq Tuners
Superchips Flashpaq tuners will optimize both engine and transmission calibration throughout the entire powerband. They're effective from part-throttle through wide-open throttle. Features include: * Internet updateable * Built-in diagnostic trouble code definitions * Built-in help screens * USB communications * Custom application upgradeable * Multiple tuning levels * Increased user options for more control * Ergonomically-designed case * Large, soft key buttons * Permanently mounted cable * 300 percent larger screen * Backlit screen for easy-to-read night use
( 99 )
$460.95
$413.95
On Sale
DiabloSport Pulsar In-Line Computers
Tuning has never been easier! DiabloSport Pulsar in-line computers that connect directly to your vehicle's PCM, eliminating unnecessary wires in the engine compartment. By connecting directly to the PCM, Pulsar computers have the ability to control the vehicles signals to optimize performance gains, throttle response, MDS controls, mileage, and more. To make things even better, each DiabloSport Pulsar offers 8 performance levels that are changed by using the vehicle cruise control and buttons on the steering wheel. Power levels are displayed where the gear indicator shows on the dash. Adjustable power levels on-the-fly improves economy, towing capabilities, and performance.
( 2 )
$767.95
$690.95
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster