Availability

- In Stock Items, Including at a Supplier. Ships In a Few Days. (1) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
- All Items, Including Not In Stock (3) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
Filters
Part Type
- Engine Management Systems (2) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
- Engine and Transmission Combos (1) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
Brand
- BluePrint Engines (1) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
- Edelbrock (1) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
- Haltech (1) The options in this area are not available since you have already selected choices in the area. Use the "Get Results" button for your current choices.
Make/Engine
Price Range
Filter Options
Savings Central
- Free Shipping (1)

3 Results Found For "sbc distributor"

Individual Parts

Part Groups

Results 1 - 3 of 3

BluePrint Builder Series 427/540HP Standard Edition EFI Crate Engine and 700R4 Transmission Combos

BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected GM small block-compatible 427 c.i.d. Pro Series engine with a 700R4 automatic transmission enabling the production of 540 hp and 535 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged steel crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 66cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .577 in. intake/.577 in. exhaust valve lift * 240 intake/248 exhaust duration at .050 in. of lift * 112 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley Sniper 2 EFI system * Satin aluminum intake manifold * Pro Series Ready Run distributor * EFI fuel pump kit * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$21,699.00

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,364.95

Haltech Elite 2500 ECU with Plug'n'Play Harness

Haltech's Elite 2500 ECU with Plug'n'Play harness provides the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and this plug-and-play product allows you to be up and running in just a few hours. The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, and 8-cylinder, drive-by-wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof Case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software Harness features: * An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration Notes: Please confirm your alternator connector (see the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) ignition coils and harnesses are not included, Please order 8 x HT-020102 and/or HT-045657 if required.

Not Yet Reviewed

$2,899.00

1

Page 1 of 1