Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
65 Results Found For "ratio"
Painless Performance OEM Flashed Computers
Painless Performance OEM computers feature a stock calibration made for your specific vehicle while removing the VATS (vehicle anti-theft system) making them the perfect solution for your engine swap. Some tuning may be required for your specific application, but the computer will allow you to start your vehicle and get it to a local tuner. Make your engine swap easier with Painless Performance computers.
( 8 )
$199.99
JET Stage 2 Computer Chips/Modules
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 113 )
$165.99
—
$341.99
JET Six Pack Performance Chips
Are you looking for a new performance chip but aren't sure which one to get? Now you don't have to worry--JET has taken away the guesswork with their Six Pack performance chips. They allow the driver to select from six different levels of performance with the push of a button. They include programs for economy, towing, Stage 1 and Stage 2 performance, valet mode, and security.
( 10 )
$293.99
—
$367.99
On Sale
DiabloSport PredatorX Tuners
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 16 )
$302.95
$272.65
Dakota Digital EFI Interface Modules
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 29 )
$133.00
SCT Livewire TS Plus Performance Programmer and Monitors
SCT Livewire TS performance programmer and monitors let you tap your ride's hidden performance and excitement! SCT Livewire plus touch screens are easy to set-up, use, and navigate to quickly upgrade your boring factory-calibrated vehicle computer for a high performance driving experience. These tuner kits are available for both gas and diesel vehicles plus they include a windshield mount to keep your data at eye level. You're not like everyone else and your driving experience doesn't need to be mediocre! Power tune with SCT Livewire TS Plus performance programmer and monitors. SCT Livewire TS Plus features: * Color 4 in. touch screen display * Rear view camera input * Automatic on/off/sleep mode * Holds up to 10 custom tunes * Reads and clears DTC codes * Built-in performance calculator * High-speed data logging and monitoring * User adjustable tune options * User selectable graphics and gauge layouts * User adjustable warnings/alerts * Adjust for different size fuel injectors * Disable CMCV to prevent CEL * Remove, increase, or decrease vehicle's speed limiter * Increase or decrease idle speed * Disable traction control * Add or remove timing by rpm range * Add or remove fuel at wide open throttle * Change transmission shift pressure - automatic transmissions only * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Stores vehicle's stock file before programming * Supports and holds custom tunes * Adjust electric fan engagement temperature Custom Tune File Adjustable Options: * Increase or decrease idle speed * Remove, increase, or decrease vehicle's rpm limiter in Drive * Remove, increase, or decrease vehicle's rpm limiter in Neutral * Remove, increase, or decrease vehicle's speed limiter * Adjust electric fan engagement temperature * Add or remove fuel at wide open throttle * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Increase or decrease the wide open throttle shift points of each gear individually * Change transmission shift pressure - automatic transmissions only
( 52 )
$499.00
DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 3 )
$829.99
—
$869.99
On Sale
Holley Terminator X MAX GM 6L80/90 Transmission Kits
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$587.95
$528.95
On Sale
Edge EZX Modules
The Edge EZX module is the next-generation inline performance module engineered for today's most powerful diesel trucks. Designed for simple, plug-and-play installation, the EZX connects directly to your factory system in minutes with no cutting or splicing required. Once installed, you'll unlock on-the-fly power level adjustments using the intuitive Edge smartphone app, giving you total control of your truck's performance right from your phone. Whether you're towing heavy loads, daily driving, or pushing your truck to the limit, the EZX is built to deliver. Enjoy instant throttle response, improved drivability, and up to 1,200 ft-lbs of torque to the tires. Engineered to be emissions safe and warranty-friendly with no trace when removed, the EZX offers safe, reliable power without compromise. NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app
( 8 )
$511.95
—
$767.95
$459.95
—
$690.95
Edelbrock TC Transmission Controllers
Edelbrock TC transmission controllers are offered as a standalone system to work with Pro Flo 4, most aftermarket fuel injection systems and carbureted applications utilizing a TPS sensor. Features: * Transmission control over shift points, firmness, speed, torque converter lock up, shift table, speedometer calibration and line pressure * Edelbrock TC Tuner calibration app (available for both Android and Apple devices) and optional 7 in. touchscreen Bluetooth tablet for setup, adjustment and visual display * Easy install with compact housing and clean-look wiring harness * Includes base calibrations for a plug-and-play setup * Compatible with carbureted applications utilizing a standalone throttle position sensor * CAN bus communication for functionality with all Pro-Flo 4 systems and most aftermarket EFI systems * Also, allows you to change the final drive ratio, tire diameter, and transfer case ratio
( 4 )
$864.95
—
$910.95
On Sale
DiabloSport Pulsar XT Power Modules
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 3 )
$511.95
$459.95
On Sale
Edge Pulsar LT Modules
Edge Pulsar LT modules are a one-of-a-kind in-line module that offers feature combinations never before seen in a standalone module. With the Pulsar LT you will be able to adjust throttle response levels, tire size adjustments, TPMS options, speed limiter, and more without having to tune or modify the vehicle. The Pulsar LT connects directly to your vehicle's computer system and makes its changes in-line with the other modules. Utilizing steering wheel controls, the Edge Pulsar LT owners can make all the changes that they desire at any time, driving or parked. The Pulsar LT module, in truth, is multiple products in one. Sure, you can go out and purchase a throttle booster, and then a separate calibration product to adjust tire size and TPMS, and possibly find a custom tuner to adjust the speed limiter but why clutter your vehicle with expensive products that only provide part of the solution you are looking for. The Edge Pulsar LT modules deliver serious options, seamless control, and does so affordably, with an innovative single easy-to-use solution. Product features: * Plug-and-play installation using factory connectors * Multiple throttle sensitivity levels * On-the-fly adjustability via steering wheel controls * Speed limiter adjustment * TPMS Adjustment * Tire size speedometer correction * Axle ratio * Read and delete DTCs * Auto start/stop * AFM/DFM disable * Manual DPF Regeneration * Engine idle up * Allison transmission relearn * Features vary by vehicle model
Not Yet Reviewed
$789.95
$562.95
—
$716.95
Z Automotive Tazer DT Programmers
Z Automotive Tazer DT programmers unlock factory features by merely unplugging the SGW module and plugging the Tazer DT in its place. These programmers allow you to adjust your vehicle settings for tire size, gear ratio, and transfer case low ratio. They also have "live" functions like auto start/stop disable, auto tow mode, Light Show mode, Cooldown mode, and Line Lock mode. Unlock your trucks factory potential with Z Automotive Tazer DT programmers. Some of the many other product features include: * Dark mode turns off all exterior lighting and radio display while parked with the engine running * Rock crawl mode locks all four brakes by pressing steering wheel buttons to hold the vehicle still * Winch mode raises idle 2,000 rpm with a simple button press * "Clear CELs" resets the check engine light * 0 to 30 and 0 to 60 display timers * Enable/disable TravelLink/XM traffic and weather * Enable/disable One-touch lane change * Enable/disable TPMS system
( 4 )
$329.00
SCT X3 Power Flash Programmers
These SCT X3 Power Flash programmers store up to three separate custom tunes that can increase horsepower, torque, and even fuel mileage! They feature a huge backlit LCD display for easy viewing of built-in data logging or real-time monitored vehicle data, and popular sensor data such as EGT, air/fuel ratio, and many other sources. The programmers back up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. These SCT X3 Power Flash programmers can read and clear diagnostic trouble codes. They have dual analog inputs, user-adjustable vehicle parameters, and include a USB interface cable.
( 7 )
$379.00
Ford Performance Parts 2.7L Bronco Performance Calibrations
Enhance the performance of your 2.7L engine in your late-model Bronco! The Ford Performance engineered and dyno-tested calibration delivers their promise of more power and increased performance without sacrificing reliability. Product details: * Improved throttle response throughout RPM range * Optimized shift schedule * Peak torque = 433 lbs.-ft. at 3,500 rpm * Peak power = 355 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). Additional modifications required. * Ability to change axle ratio/FDU up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * Not available in California for 2022-23 model year vehicles * M-12655-F ProCal 4 delivery tool included * The M-9603-B23 calibration is also available * Premium fuel required NOTES: *Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. * Calibration and ProCal 4 tool are VIN locked. * ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode." * ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
( 1 )
$754.99
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,149.99
—
$1,499.99
On Sale
Superchips GM Flashcal Tuners
Superchips GM Flashcal tuners are easy to use and light on your wallet. These handheld automotive devices recalibrate your truck's speedometer for aftermarket wheels, tires, and gears. Just plug them into your truck's OBD-II port, select your new tire size or gear ratio, and voila--your truck is calibrated! They're so easy to use that anyone can install them. Superchips GM Flashcal tuners deliver performance that's simple and affordable. Flashcal features (options may vary based on year, make, and model): * Corrects speedometer for tire upgrades between 26 in. to 38 in. * Speedometer recalibration for gear/axle swaps * Speed/rev limiter options * TPMS options * Reads and clears diagnostic trouble codes * Digital battery voltage display * Real-time data logging * Real-time data monitoring * Upgradeable to Flashpaq with performance tuning
( 16 )
$284.95
$256.45
—
$373.95
On Sale
DiabloSport PredatorX Tuners with PCM Swap
DiabloSport's PredatorX is the ultimate mobile tuning solution, and now includes a PCM swap. When you connect PredatorX to your vehicle it will gather the info required for the PCM swap and direct you to the swap form right through the app. DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with PredatorX to give you complete tuning access, and the OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. Preloaded with power adding tunes for multiple octane levels, they also offer transmission tunes for applications where they are needed. For those seeking more than the tunes provided, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Select the tuner designed for use with your vehicle. Features and benefits: * Add horsepower and torque * No vehicle downtime * Preloaded tunes for multiple octanes * Transmission tune included * Disable MDS * Calibrate speedometer for taller tires * Set axle ratio if you've swapped gears * Disable traction control/ESP * Set target ECT for cooling fans * Disable Auto Start-Stop * Remove speed limiter * Adjust idle speed * Raise rev limiter in drive or neutral * Live data monitoring * Read/clear diagnostic trouble codes (DTCs) * Bypass harness included where applicable
( 1 )
$429.95
—
$450.95
$385.95
—
$404.95
Ford Performance Parts 3.0L Bronco Performance Calibrations
Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$725.99
Hypertech Max Energy Power Programmers
Hypertech's Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable. Additional features (depending on the vehicle application) include: * Raise the top-speed limiter to match the speed rating of high performance tires * Raise the engine's rpm limiter for increased performance * Adjust individual automatic transmission shift points and shift firmness * Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes * Lower the cooling fan on/off temperatures to match the thermostat rating * Read and clear diagnostic trouble codes and turn off "check engine" lights * Ability to adjust settings or go back to stock calibration at any time
( 132 )
$399.95
On Sale
DiabloSport Pulsar LT Control Modules
The DiabloSport Pulsar LT is a one-of-a-kind inline control module that offers feature combinations never before seen in a standalone module. Adjust throttle response levels, tire size adjustment, TPMS options, speed limiter, and more without tuning or modifying the vehicle. The Pulsar LT connects directly to the vehicle computer system and makes its changes inline with the other modules. Utilizing steering wheel controls, Pulsar LT owners can make all the changes they desire at any time, driving or parked. Order the model compatible with your vehicle. Pulsar LT features: * Speed limiter adjustment (82 to 140 mph) * TPMS adjustment (25 to 99 psi) * Tire size correction (29 50.9) * Axle ratio (2.00 6.99) * Clear DTCs * Auto Start/Stop Disable * DFM disable * Multiple throttle sensitivity levels * On-the-fly adjustability via steering wheel controls
( 21 )
$614.95
$552.95
Ford Performance Parts 3.0L Ranger Raptor Performance Calibrations
Level up your Ford Ranger Raptor 3.0L EcoBoost engine's performance with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2024 Bronco Raptor (2025 available for non-California vehicles) * Improved throttle response throughout the rpm range * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
( 1 )
$725.99
On Sale
Range Technology Pulsar LT Modules
Range Technology Pulsar LT modules offer complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT affords you the ability to adjust throttle response, tire size, gear ratio, TPMS, and can be used to disable Auto Start/Stop. It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Select the Range Technology Pulsar LT module designed for your vehicle. Features: * Disable Active Fuel Management and Dynamic Fuel Management (AFM/DFM) * Disable Auto Start/Stop * Calibrate speedometer for larger tires * Speed limiter adjustment * Adjust TPMS settings * Modify gear ratio * Clear DTCs * Throttle booster with on-the-fly adjustment * Manual DPF regeneration * Engine idle up * Transmission relearn Note: Features vary by vehicle model/engine.
( 1 )
$562.95
—
$716.95
$505.95
—
$644.95
Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits
Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.
Not Yet Reviewed
$1,364.95
—
$1,428.95
