Computers, Chips & Programmers Ignitions & Electrical - pressure KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Haltech Rebel LS Gen 3 and 4 ECU Kits

Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.

5.0 out of 5 stars ( 4 )

$1,495.00

Holley Terminator X MAX Engine Control Modules

Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

4.29 out of 5 stars ( 7 )

$1,229.95

Holley Terminator X Engine Control Modules

Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

Not Yet Reviewed

$870.95

Holley EFI CAN Input/Output Modules Kits

The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz

4.0 out of 5 stars ( 3 )

$499.95

Holley HP EFI ECU and Harness Kits

Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff

4.44 out of 5 stars ( 25 )

$2,049.95

—

$3,949.95

Dakota Digital EFI Interface Modules

With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature

4.66 out of 5 stars ( 29 )

$133.00

SCT Livewire TS Plus Performance Programmer and Monitors

SCT Livewire TS performance programmer and monitors let you tap your ride's hidden performance and excitement! SCT Livewire plus touch screens are easy to set-up, use, and navigate to quickly upgrade your boring factory-calibrated vehicle computer for a high performance driving experience. These tuner kits are available for both gas and diesel vehicles plus they include a windshield mount to keep your data at eye level. You're not like everyone else and your driving experience doesn't need to be mediocre! Power tune with SCT Livewire TS Plus performance programmer and monitors. SCT Livewire TS Plus features: * Color 4 in. touch screen display * Rear view camera input * Automatic on/off/sleep mode * Holds up to 10 custom tunes * Reads and clears DTC codes * Built-in performance calculator * High-speed data logging and monitoring * User adjustable tune options * User selectable graphics and gauge layouts * User adjustable warnings/alerts * Adjust for different size fuel injectors * Disable CMCV to prevent CEL * Remove, increase, or decrease vehicle's speed limiter * Increase or decrease idle speed * Disable traction control * Add or remove timing by rpm range * Add or remove fuel at wide open throttle * Change transmission shift pressure - automatic transmissions only * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Stores vehicle's stock file before programming * Supports and holds custom tunes * Adjust electric fan engagement temperature Custom Tune File Adjustable Options: * Increase or decrease idle speed * Remove, increase, or decrease vehicle's rpm limiter in Drive * Remove, increase, or decrease vehicle's rpm limiter in Neutral * Remove, increase, or decrease vehicle's speed limiter * Adjust electric fan engagement temperature * Add or remove fuel at wide open throttle * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Increase or decrease the wide open throttle shift points of each gear individually * Change transmission shift pressure - automatic transmissions only

4.13 out of 5 stars ( 52 )

$499.00

Holley Terminator X Max GM Gen V LT Direct Injection Kits

Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.

Not Yet Reviewed

$3,149.95

—

$3,649.95

On Sale

Edge EZX Modules

The Edge EZX module is the next-generation inline performance module engineered for today's most powerful diesel trucks. Designed for simple, plug-and-play installation, the EZX connects directly to your factory system in minutes with no cutting or splicing required. Once installed, you'll unlock on-the-fly power level adjustments using the intuitive Edge smartphone app, giving you total control of your truck's performance right from your phone. Whether you're towing heavy loads, daily driving, or pushing your truck to the limit, the EZX is built to deliver. Enjoy instant throttle response, improved drivability, and up to 1,200 ft-lbs of torque to the tires. Engineered to be emissions safe and warranty-friendly with no trace when removed, the EZX offers safe, reliable power without compromise. NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app

4.38 out of 5 stars ( 8 )

$729.95

$511.95

—

$767.95

Chevrolet Performance LT4 Engine Controller Kits

Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)

Not Yet Reviewed

$3,052.24

—

$4,025.73

Haltech Elite 1500 ECU

Haltech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits

Not Yet Reviewed

$1,599.00

Edelbrock TC Transmission Controllers

Edelbrock TC transmission controllers are offered as a standalone system to work with Pro Flo 4, most aftermarket fuel injection systems and carbureted applications utilizing a TPS sensor. Features: * Transmission control over shift points, firmness, speed, torque converter lock up, shift table, speedometer calibration and line pressure * Edelbrock TC Tuner calibration app (available for both Android and Apple devices) and optional 7 in. touchscreen Bluetooth tablet for setup, adjustment and visual display * Easy install with compact housing and clean-look wiring harness * Includes base calibrations for a plug-and-play setup * Compatible with carbureted applications utilizing a standalone throttle position sensor * CAN bus communication for functionality with all Pro-Flo 4 systems and most aftermarket EFI systems * Also, allows you to change the final drive ratio, tire diameter, and transfer case ratio

2.5 out of 5 stars ( 4 )

$864.95

—

$910.95

FuelTech NanoPRO Oxygen Sensor Conditioners

FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V

Not Yet Reviewed

$349.00

Edge EZ+Insight CTS3 L5P Duramax Kits

Edge's EZ+Insight CTS3 L5P Duramax kits provide "EZ" power for your Duramax diesel paired with their Insight CTS3, giving you more control with added features, like the ability to read and clear trouble codes, perform a manual DPF Regeneration cycle, and of course, monitor everything going on under the hood. Get peace of mind with the data Insight provides real-time through a state-of-the-art color touch screen. Watch live data, like EGTs, boost, rail pressure, soot levels, DPF status, and even distance since your last regen. Edge EZ module makes a massive improvement in drivability without sacrificing longevity or the reliability of your emissions equipment. Their intuitive smartphone app offers on-the-fly tuning adjustments over five specific calibrations, and to further enhance your driving experience, each of the five power levels can be adjusted to run one of seven throttle pedal settings giving you the control over throttle feel, eliminating pedal lag. For extra value and savings, purchase an Edge EZ + Insight kit to give your L5P exactly what it needs.

Not Yet Reviewed

$1,024.95

Edge Comp Modules

These Edge Comp modules maximize engine efficiency by monitoring the rpm, timing, turbo boost pressure, and fueling parameters. The modules use this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp modules feature five power levels with power gains ranging from 40-120 hp. Each of the five power levels has an independent 5-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low-boost smoke control, no matter what additional power modifications have been made to the engine. The Comp modules are fully adjustable on the fly, and mount inside the cab.

5.0 out of 5 stars ( 1 )

$799.95

Dorman Remanufactured ABS Control Modules

It's bad news when your wheels lock up and throw you into a skid. The problem could be with your anti-lock braking system. Dorman offers a full line of economical ABS control modules for use on dozens of makes/models. These units are remanufactured from quality materials and fully tested for performance. The modules read the data from your speed sensor and send the correct pressure to each wheel--enabling you to maintain steering control and stop quickly under most conditions. Dorman plug-and-play replacements are upgraded with durable main pump transistors to avoid pump relay burnout. When the ABS light on your dash comes on, retain control of the anti-lock brakes with a newer, dependable module from Dorman.

4.62 out of 5 stars ( 42 )

$248.99

—

$715.99

Bully Dog Sensor Docking Stations

Bully Dog sensor docking stations offer an unparalleled glimpse into the comparative health of your vehicle. These accessories for the GT and Watch Dog product lines make it easy to install aftermarket automotive sensors onto your modern vehicle, and then display those specific values. They support a multitude of different measuring device types, including pressure (oil and/or boost), speed, and temperature sensors (exhaust, transmission and/or air intake). Bully Dog sensor docking stations are a superb, easy way for you to instantly check on the well-being of your vehicle.

4.0 out of 5 stars ( 1 )

$156.99

—

$171.99

aFe Scorcher GT Modules

aFe Scorcher GT modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin on-the-fly power adjustments. The four power settings are adjustable with one button, and the LED light indicates the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher GT modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure, improving vehicle efficiency, power, and throttle response. The tuner components are housed in a black powdercoated aluminum casing—with connectors that require no modification to your factory harness; they plug directly into the stock wiring harness connectors and sensors. Order the computer module designed for your vehicle application.

4.0 out of 5 stars ( 1 )

$387.00

—

$500.00

FAST EZ-EFI 2.0 Multi-Port Retro-Fit Kits

FAST EZ-EFI 2.0 Multi-Port Retro-Fit kits allow owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower—because the systems are based on each customer's supplied injectors. The next generation of the revolutionary self-tuning EZ-EFI has been upgraded with more features than ever before. Yet it maintains ease of use that doesn't require a laptop or tuning experience. As with the original EZ-EFI, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 tunes itself as you drive. The new high-quality wiring harness (with a sleek mesh-type loom) uses commonly available late model OEM sensors for accuracy and durability. The EZ-EFI 2.0 has an updated hand-held, as well, featuring the industry's first color touch screen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS—meaning there are nearly limitless mounting options (suction cup mount is included with all kits). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits—and all kits work with wet nitrous systems, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition features an EZ-Solution option, meaning that it is plug-and-play with FAST Dual-Sync distributors for electronic timing control, or can be used with an EFI distributor of your choice and a FAST crank trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor where timing is set manually. Experience the advantage of fuel injection without the headaches; order a FAST EZ-EFI 2.0 Multi-Port Retro-Fit kit.

3.2 out of 5 stars ( 10 )

$1,589.95

Edge EZ Plug-In Modules

These Edge EZ modules unleash the potential of this monster by carefully monitoring rpm, timing, turbo boost pressure, and fueling parameters, and adjusting the fueling and timing to maximize power, torque, and drivability. The Edge EZ modules allow maximum fueling at full turbo boost, and provide an additional 40 to 70 hp and up to 220 ft.-lbs. of torque. Simply plug in the Edge EZ connectors into two stock connections, and you're ready to go. These modules can also be stacked with other upgrades to deliver even more power. They can't be beat for easy installation and power upgrades. Go ahead, install an EZ today and feel the incredible difference it makes!

4.43 out of 5 stars ( 7 )

$562.95

Haltech Elite 2500 ECU

Haltech's Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications, recommended for engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Haltech has been at the cutting edge of engine management technology since it first opened its doors in 1986. They're well-known for their high horsepower engine management, which complements their array of harnesses and add-ons. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, USB programming cable * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software

Not Yet Reviewed

$1,959.00

Superchips Pulsar XT Computer Programmers

Superchips Pulsar XT computer programmers are innovative inline modules engineered to keep your factory PCM untouched, with no PCM swap or unlock required to add up to 20 hp/30 lb.-ft. of torque. Pulsar XT interacts with sensors under the hood and your PCM signals to enhance the drivability, power, and torque, which can all be operated from the steering wheel controls. This all-new take on performance and calibration lets you enjoy shift-on-the-fly performance gains, with calibration adjustment for larger tires, gear ratio changes, TPMS adjustments, and Auto Start/Stop disable all in one easy-to-use device. Pulsar XTs can also be used to read and clear Diagnostic Troubles Codes and are easily removed for dealer/warranty work with no traces left within the system. Features: * User-adjustable power levels via cruise control buttons * Adjustable power levels on-the-fly * Tire size: 20 in. to 49.9 in. * Gear ratio: 2.00 to 5.99 * Improves economy, towing capabilities, and performance * Performance levels 1 to 5, with incremental power gains * Power level displayed on OEM dash * Tire pressure adjust 20 to 69 psi

4.67 out of 5 stars ( 3 )

$665.95

—

$687.95

Haltech Elite 2500 ECU with Plug and Pin Set

Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software

Not Yet Reviewed

$2,044.00

ACDelco ABS Control Modules

ACDelco ABS control modules meet or exceed OEM part specifications to help them deliver the same fit and performance as your factory equipment. ABS modules read the data from your speed sensor and send the correct pressure to each wheel, enabling you to maintain steering control and stop quickly under most conditions. Hundreds of models are available for vehicles from the 1990s and up. Select the replacement ABS control module recommended for your application.

4.5 out of 5 stars ( 2 )

$59.99

—

$663.99

39 Results Found For "pressure"