Availability
52 Results Found For "intake"
FiTech Ultimate LS Standalone ECUs
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 54 )
$567.99
—
$1,202.99
Ford Performance Parts 2015-17 Mustang GT Power Pack 2 Performance Packages
For a difference you can hear and feel, Ford Performance Parts 2015-17 Mustang GT Power Pack 2 performance packages should be at the top of your list. Featuring Ford proprietary software and engineering, with calibrations available for manual and automatic transmissions, these kits allow gear ratio changes up to 4.09:1. Additional features: * GT350 cold air intake * 87mm throttle body with exclusive intake adapter * Open air filter with industry exclusive 50-state legal CARB E.O. * 21 hp and 24 lbs.-ft. peak gains over stock * 40 lbs.-ft. gain at 1500 rpm * Automatic calibrations feature optimized performance shift schedule * Exclusive no-lift shift strategy and enhanced throttle response * 91 octane or higher fuel required
( 30 )
$743.99
On Sale
Holley Terminator X Max GM Gen V LT Direct Injection Kits
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,299.95
—
$3,849.99
$2,968.95
—
$3,463.95
aFe Power Pack Stage 3 Performance Packages
The aFe Power Pack Stage 3 performance package is an all in one performance upgrade designed to deliver immediate gains in horsepower, torque, and throttle response by combining two of aFe's most effective bolt on modifications into a single, easy to install package. By pairing the high flow Momentum GT cold air intake with the Pedal 2 Metal throttle enhancer, this system improves engine breathing while eliminating drive by wire throttle lag, resulting in quicker acceleration, smoother power delivery, and a more connected driving feel. The intake features a sealed housing and a washable Pro 5R air filter to maximize airflow and efficiency, while the Bluetooth enabled throttle enhancer allows drivers to select from multiple driving modes and fine tune sensitivity to match their preferences, including added security features like valet mode. Designed for straightforward installation with no permanent modifications, the aFe Power Stage 3 Power Pack is ideal for enthusiasts looking to unlock hidden performance and transform everyday drivability with proven aFe engineering.
Not Yet Reviewed
$593.00
Banks Power Ford 2011-2015 6.8L V-10 Class A Motorhome PowerPack Systems
Banks Power Ford 2011-2015 6.8L V-10 Class A Motorhome PowerPack systems eliminate factory restrictions with free-flowing intake and exhaust components to boost performance, efficiency, and engine life, while adding hefty power—all at a modest cost. They also stretch your driving time between fill-ups! The PowerPack components work in concert to optimize power, torque, mileage, and durability. After years of real-world Research and Development on the open road, the folks at Banks Power know what it takes to efficiently get every extra ounce of horsepower and torque out of your 6.8L Ford V-10 engine in order to get your Class-A Motorhome running at its full potential. With its free-flowing components and mandrel-bent tubing that dramatically reduce back-pressure, your Ford Class-A Motorhome will instantly gain an overall improvement in horsepower, torque, throttle response and fuel economy.
Not Yet Reviewed
$2,769.00
—
$3,269.00
Ford Performance Parts 5.0L Crate Engine Control Packs
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 3 )
$2,125.99
—
$2,149.99
On Sale
Holley Hilborn Universal Terminator X MPFI Systems
The Hilborn EFI-R manifold systems combine electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. Holley Hilborn Universal Terminator X MPFI systems provide cutting edge EFI technology, and are intended for the most serious naturally aspirated performance enthusiast. Each kit includes a CAN-USB tuning dongle, so you can tune your EFI system specifically for your engine via Holley's free Terminator X EFI software. Also included is a universal main harness, EV1 injector harness, Bosch LSU 4.9 wideband, input/output harness, and main power harness. These kits are for use with Hilborn EFI-R intake manifolds: * 300-800 for Big Block Chevrolet applications requiring 2 7/16 in. throttle bores * 300-801 for Big Block Chevrolet applications requiring 2 5/8 in. throttle bores * 300-807 for Big Block Chevrolet applications requiring 3 in. throttle bores
Not Yet Reviewed
$1,349.95
$1,213.95
FAST EZ-EFI 2.0 Multi-Port Retro-Fit Kits
FAST EZ-EFI 2.0 Multi-Port Retro-Fit kits allow owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower—because the systems are based on each customer's supplied injectors. The next generation of the revolutionary self-tuning EZ-EFI has been upgraded with more features than ever before. Yet it maintains ease of use that doesn't require a laptop or tuning experience. As with the original EZ-EFI, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 tunes itself as you drive. The new high-quality wiring harness (with a sleek mesh-type loom) uses commonly available late model OEM sensors for accuracy and durability. The EZ-EFI 2.0 has an updated hand-held, as well, featuring the industry's first color touch screen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS—meaning there are nearly limitless mounting options (suction cup mount is included with all kits). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits—and all kits work with wet nitrous systems, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition features an EZ-Solution option, meaning that it is plug-and-play with FAST Dual-Sync distributors for electronic timing control, or can be used with an EFI distributor of your choice and a FAST crank trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor where timing is set manually. Experience the advantage of fuel injection without the headaches; order a FAST EZ-EFI 2.0 Multi-Port Retro-Fit kit.
( 10 )
$1,589.99
Ford Performance Parts Crate Engine Control Packs
Looking to add a Ford Performance Parts crate engine to your custom built vehicle? Take the complexity and mystery out of wiring your new build with Ford Performance Parts crate engine control packs! Features include: * Unique controls pack harnesses to replace stock body harnesses; designed for custom-built vehicles * OBD-II diagnostic ports to assist in vehicle calibration uploads and diagnosis of problems * PCMs with Ford Performance Parts performance calibration (custom calibration required on some engines and for aftermarket intake systems) * Electronic throttle control accelerator pedals, eliminating throttle cable routing problems * Power distribution modules * Requires return-type fuel system, will not work with returnless fuel system
( 2 )
$1,949.99
—
$2,323.99
Haltech Elite 2500 ECU with Plug and Pin Set
Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,087.99
Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits
Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.
Not Yet Reviewed
$1,405.95
—
$1,428.95
Edelbrock Pro-Flo 4 LS Self Learning Engine Management Systems
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 7 )
$1,210.95
—
$1,222.99
On Sale
Haltech Nexus R3 VCU with Plug and Pin Set
Haltech's Nexus R3 VCU with plug and pin set combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Product details: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: -- (1) Nexus R3 VCU -- Plug and Pins: AMP 34 Pin 4 Row 3 Key Superseal -- Plug and Pins: AMP 34 pin 4 Row 4 Key Superseal -- Plug and Pins: Male Deutsch DTP-06-4S - Black connector (25 amp) VCU features: * Controlled via NSP (Nexus Software Programmer) * Long term learning * Stepper motor control * 4D closed loop boost control * Closed loop CO2 control * Rotational idle * Launch control * Traction control * Anti-lag * Dual knock control * Trans brake control * Race timer * Multi-stage fuel injection * Multi-level engine protection * 6-stage nitrous control * 4-sensor variable cam control * Intake air bleed control * Flat shift control * Shock travel and ride height control * Advanced torque management * On-board Wi-Fi * On-board data-logging (128MB) * AUTOMATIC TRANSMISSION CONTROL -- Ford AODE/4R70W -- GM 4L60E -- GM 4L80E -- Toyota A340E -- Lenco -- Liberty
Not Yet Reviewed
$2,732.00
$2,460.00
Haltech Elite 1500 ECU with Basic Universal Wire-In Harness
Haltech Elite 1500 ECU with basic universal wire-in harness is ideal for dedicated race cars, engine swaps and custom wiring jobs. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 1500 provides engine calibrators with the tools they need to get the job done right. The basic universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your 1500 ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! The Elite 1500 is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to both tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 1500 ECU with DBW and Race Functions, basic universal wire-in harness. waterproof USB cap, and USB programming cable (does not include fuse and relay box) * Elite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications * Recommended for 4-cylinder, drive-by-wire (DBW) or 2 rotor engines, EFI conversions, engines with multiple variable camshafts * Supports 1 to 12-cylinder engines, 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multi-point injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use * Color-coded and labelled wires that match the detailed wiring diagram for a confusion-free construction process * The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration
Not Yet Reviewed
$1,990.00
Clearance
Stillen TruControl Inline Power Modules
Upgrade your vehicle with Stillen's TruControl line of inline power modules and release its true potential. By seamlessly integrating into the factory wiring harness and fine-tuning crucial parameters, the modules unlock streams of performance throughout the entire power band. And you'll be up and running in just 15 minutes without any special tools, splicing, or soldering. Even better, TruControl by Stillen inline power modules won't jeopardize your factory warranty. Simply remove the module before visiting the dealership for service, and your warranty remains intact, allowing you to enjoy the perks of enhanced power and performance worry-free. Stillen TruControl inline power modules are the easiest and most affordable upgrade available for your car, truck, or Jeep. Select the one designed for your vehicle. Features and benefits: * Very easy installation; does not alter the factory ECU * Bluetooth integration * Free app with smartphone integration * No wiring or specialty tools required * Easy removal and reversible to maintain factory warranty * Over-the-air custom tuning file for Stillen aftermarket parts (exhaust, intake, etc.)
Not Yet Reviewed
$649.00
$419.50
Haltech Elite 1500 ECU with Plug and Pin Set
Haltech's Elite 1500 ECU with plug and pin set is ideal for popular late model performance and racing applications. The Elite 1500 is a two-connector, stand-alone ECU that provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 1500 ECU with plug and pin set * Plug and pins only amp 26 and 34-pin, 4-row, 3-Key Superseal Set * Recommended for 4-cylinder, drive-by-wire (DBW), or 2 rotor engines, EFI conversions, and engines with multiple variable camshafts * Elite 1500 ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake, and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more * Supports 1 to 12-cylinder engines and 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45-channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use
Not Yet Reviewed
$1,717.00
Haltech Elite 1500 ECU with Premium Universal Wire-In Harness
Haltech offers a variety of engine management systems, including the Elite 1500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Countless ECU, advanced tuning, and race functions * Outputs: Up to 4 injector and 4 ignition * Suits: Universal 1-12 cylinder or 2 rotor applications * Includes: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB software key.
Not Yet Reviewed
$2,080.00
Haltech Elite 2500 ECU with Basic Universal Wire-In Harness
Haltech's Elite 2500 ECU with basic universal wire-in harness is ideal for dedicated race cars, engine swaps and custom wiring jobs. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 2500 provides engine calibrators with the tools they need to get the job done right. The basic universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your 2500 ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! The Elite 2500 ECU is now paired with new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to both tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, basic universal wire-in harness, and USB programming cable * Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications * Recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts (does not include fuse and relay box) * Supports 1 to 12-cylinder engines, 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,360.00
Clearance
Roush 2015-17 Mustang GT Level 1 Performance Pacs
Crank up the power with Roush 2015-17 Mustang GT Level 1 Performance Pacs. These assemblies can increase rear wheel power by 25 hp and 30 lb.-ft. on your stock Mustang GT 5.0L V8. They include Roush CAD-designed and tooled cold air kits that are fully tested and calibration-certified to work seamlessly with their performance ECU re-flash, while adding a sporty sound to your engine. Level 1 Pacs will maximize your underhood space, and the premium automotive-grade, injection-molded material will last a long time. Plus, with a lower intake restriction over stock, you'll never need to upgrade your intake, no matter what mods you plan in the future. Let the experienced engineers from Roush handle the details—you'll get improved horsepower and torque, along with aggressive throttle mapping, a sporty feel, and strong performance without sacrificing drivability. Simply install a Mustang GT Level 1 Performance Pac!
Not Yet Reviewed
$749.99
$475.50
Haltech Elite 1500 ECU
Haltech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits
Not Yet Reviewed
$1,625.99
FAST MAP Sensors
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$131.99
On Sale
COBB Tuning Ford Stage 1 Plus Power Packages
COBB Tuning Ford Stage 1 Plus power packages bundle the most flexible engine management solution with more clean, cold air to boost your vehicle's power and performance. Ford Stage 1 kits feature Accessport V3 that unlocks your vehicle's potential by replacing conservative factory settings with aggressive calibrations. To that COBB adds one of their cold air intakes (some are carbon fiber) with reusable, high-flow air filters to increase airflow. Finally, most of the Ford Stage 1 Plus power packages (Mustang Ecoboost not included) are completed with machined aluminum rear motor mounts to improve the traction of all that new found power. Upgrade your Ford Focus, Fiesta, or Mustang with COBB Tuning Stage 1 Plus power packages.
Not Yet Reviewed
$970.00
—
$1,510.00
$824.50
—
$1,283.50
On Sale
DiabloSport Predator 2 with ECM Unlock Programmers
Unlock and tune your GM L8T-powered truck at home with DiabloSport Predator 2 kits. They provide their industry exclusive locksmith device and ECM harness with the popular Predator 2 handheld device, giving you the ability to tune without removing the ECM. Once unlocked, the provided tunes can add big power to your 6.6L gas truck, while improving throttle response, shifting, and more. Tunes for 87, 91, and 93 octane fuel are provided, as well as tunes for the 6-speed transmissions. DiabloSport Predator 2 with ECM unlock kits also provide adjustments like throttle boost, speed limiter, and tire size to name a few. Features: * 28 RWHP/50 RWTQ over stock on 93 octane fuel * Correct speedometer for tire size * Set final drive ratio * Adjust rev limiter * Set idle rpm in Drive/Neutral * Remove speed limiter * Adjust throttle sensitivity * Recall last mode setting * Front/rear TPMS threshold adjustment * Transmission adaptive relearn * Crank position sensor relearn * Control intake filter monitor system
Not Yet Reviewed
$813.95
$731.95
On Sale
DiabloSport Predator 2 Platinum Programmers
DiabloSport Predator 2 Platinum programmers are your custom tuning devices for both diesel and gas cars, trucks, and SUVs. Their P2 Platinum units offer the perfect tuning solution for enthusiasts that plan to add future upgrades, or have already upgraded their vehicles with aftermarket performance parts. They come pre-loaded with performance tunes designed to make the most of the stock setup and simple bolt-on parts like an intake or exhaust. When the serious mods come out, the DiabloSport P2 Platinum programmers really shine! Their nationwide network on CMR custom tuning dealers can write a custom tune designed with your mods in mind to make the most power possible! With custom tuning solutions available from DiabloSport's network of CMR dealers, you can tune for basically any upgrade you can think of. With their simple drag and drop custom tune loading process, you can be tuning your custom built ride in minutes. Predator 2 programmers now pair impressive data logging capabilities with the ability to store over 10 custom tunes on the device. You can keep multiple tunes on hand for any track condition or driving situation. With the easy-to-use, handheld design, you can tune in minutes and transform your ride into a Predator! Features include: * Pre-Loaded tunes for multiple driving styles * Easy-to-navigate user interface * New design with a slim, sleek, case that fits in the palm of your hand * Stores custom tunes, from third party dealers, using DiabloSport's CMR tuning suite * Store multiple tunes on device * Monitor and log up to 16 plus vehicle parameters * Reads/clears diagnostic trouble codes * USB connection for updates and downloads * Offline drag and drop tune installation
( 3 )
$563.95
—
$599.95
$506.95
—
$538.95
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster