Computers, Chips & Programmers Ignitions & Electrical

On Sale

FuelTech NanoPRO Oxygen Sensor Conditioners

FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V

Not Yet Reviewed

$349.00

$249.00

COBB Tuning Ford Accessport V3 Programmers

COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group

4.29 out of 5 stars ( 7 )

$585.00

—

$1,195.00

Edge EAS Universal Suction Cup Mounts

Edge EAS windshield suction cup replacement mounts are ideal for use with a variety of Edge, DiabloSport, and Superchips monitors and tuners. No vehicle modifications are required. These universal mounts work with: - Superchips TrailDash2 - TrailDash3 - Dashpaq - Dashpaq+ - DiabloSport Trinity - MX and Edge CS2/CTS2/CTS3 - Holley Tuning Group in-cab devices - Edge Insight - Evolution - Juice

Not Yet Reviewed

$17.90

Hypertech Max Energy Power Programmers

Hypertech's Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable. Additional features (depending on the vehicle application) include: * Raise the top-speed limiter to match the speed rating of high performance tires * Raise the engine's rpm limiter for increased performance * Adjust individual automatic transmission shift points and shift firmness * Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes * Lower the cooling fan on/off temperatures to match the thermostat rating * Read and clear diagnostic trouble codes and turn off "check engine" lights * Ability to adjust settings or go back to stock calibration at any time

4.02 out of 5 stars ( 132 )

$399.95

ACDelco GM Genuine Parts Body Control Modules

ACDelco GM Genuine Parts body control modules are the right replacements for your GM vehicle's original component. When you start getting the warning signs of trouble--engine won't start, loss of power, erratic transmission operation, etc.--it may be time for a new module to communicate with the systems in your ride.

3.0 out of 5 stars ( 1 )

$81.99

—

$105.99

ACDelco Accessory Control Modules

ACDelco offers a variety of accessory control modules—from active noise cancellation and theft control modules, to A/C and DC power control modules and more. These OE-style replacements are designed, engineered, and tested to rigorous standards to ensure proper fit and performance. Nearly a hundred models are available for countless vehicles from the 1990s and up. Order the accessory control module recommended for your application.

Not Yet Reviewed

$101.99

Mopar Replacement Body Control Modules

Mopar Replacement body control modules are available for your Mopar vehicle to keep your electronic systems functioning properly. These Mopar Replacement parts are factory OEM parts and will fit and function just like the original. Programming may be required during installation. With genuine Mopar Replacement parts, quality is a starting point, not an afterthought.

3.0 out of 5 stars ( 2 )

$38.99

—

$1,099.99

Mopar Replacement Engine Control Modules

Mopar Replacement offers engine control modules for a wide range of applications, including many Jeep, Dodge, Chrysler, and Ram vehicles from the 1950s and up. These new or remanufactured replacements are among the best and longest-lasting electrical system parts available. They will deliver the fit and performance you expect. Select the ECM recommended for your Mopar ride.

Not Yet Reviewed

$543.99

—

$707.99

ACDelco GM Genuine Parts Anti-Lock Brake System Modules

ACDelco GM Genuine Parts anti-lock brake system control modules help operate your vehicle's wheels, enhancing their braking ability on slippery surfaces. Don't leave your vehicle's stopping power to anything less than what the specifications require! Order the ACDelco GM Genuine Parts anti-lock brake system control modules designed for your General Motors application.

Not Yet Reviewed

$424.99

Mopar Replacement Transfer Case Control Modules

Mopar Replacement transfer case control modules are available for a variety of Jeep and Dodge applications. They control your vehicle's electronic 4WD system. The primary function of a transfer case control (TCC) module involves processing, executing, and verifying shift requests. But how does a TCC work? First, it uses your vehicle's speed and its real-time transfer case mode to process shifts. Then, it activates your transfer case encoder motor for a full shift. If necessary, it might activate your front differential locking actuator, as well. If the module doesn't process a shift, however, the selector switch will turn on and flash for 30 seconds. Original TCC modules can malfunction over time. When this happens, it may flash a warning message or trigger a warning light on your vehicle's Driver Information Center. Other telltale signs of a faulty TCC module include a faulty 4x4 system, a service 4WD message that keeps popping up, and a frequently stalling engine. Installing a new TCC module is necessary if you experience these red flags.

5.0 out of 5 stars ( 2 )

$326.99

Motorcraft Body Control Modules

Motorcraft body control modules are the best choice and the right fit for Ford, Lincoln and Mercury vehicles. The modules monitor and control various electronic accessories in your vehicle. Motorcraft body control modules ensure the best fit and easier installation to get your vehicle back on the road.

Not Yet Reviewed

$732.99

11 Results Found For "group"