Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
21 Results Found For "gm electrical connector"
Holley Terminator X Max GM Gen V LT Direct Injection Kits
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,149.95
—
$3,649.95
Holley HP EFI ECU and Harness Kits
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$1,999.95
—
$3,949.95
DIYAutoTune MegaSquirt MS3Pro Ultimate Standalone Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$2,099.99
Dorman Remanufactured ABS Control Modules
It's bad news when your wheels lock up and throw you into a skid. The problem could be with your anti-lock braking system. Dorman offers a full line of economical ABS control modules for use on dozens of makes/models. These units are remanufactured from quality materials and fully tested for performance. The modules read the data from your speed sensor and send the correct pressure to each wheel--enabling you to maintain steering control and stop quickly under most conditions. Dorman plug-and-play replacements are upgraded with durable main pump transistors to avoid pump relay burnout. When the ABS light on your dash comes on, retain control of the anti-lock brakes with a newer, dependable module from Dorman.
( 42 )
$351.95
ICT Billet ECM Bench Reader Diagnostic Tuning Tool Harnesses
ICT Billet ECM bench reader diagnostic tuning tool harnesses provide quality connections to ensure proper engine operation and easier diagnoses. Cheaper wire connectors may offer poor quality and conductivity issues, making your job harder. Don't chance it; choose ICT ECM bench reader harnesses. Features and benefits include: * Assembled with OEM-grade TXL wire * Plug-and-play for GM (Gen 3) LS series engine computers * Allows engine computer to be flashed and tuned off the vehicle * Assembled with OEM tooling, OEM Delphi connector, lock, seals, and terminals using OEM harness wire colors * Requires 12 V power source, using power and ground wire, and tuning cable/software for OBDII port
Not Yet Reviewed
$197.99
Haltech Nexus R3 VCU with Plug and Pin Set
Haltech's Nexus R3 VCU with plug and pin set combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Product details: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: -- (1) Nexus R3 VCU -- Plug and Pins: AMP 34 Pin 4 Row 3 Key Superseal -- Plug and Pins: AMP 34 pin 4 Row 4 Key Superseal -- Plug and Pins: Male Deutsch DTP-06-4S - Black connector (25 amp) VCU features: * Controlled via NSP (Nexus Software Programmer) * Long term learning * Stepper motor control * 4D closed loop boost control * Closed loop CO2 control * Rotational idle * Launch control * Traction control * Anti-lag * Dual knock control * Trans brake control * Race timer * Multi-stage fuel injection * Multi-level engine protection * 6-stage nitrous control * 4-sensor variable cam control * Intake air bleed control * Flat shift control * Shock travel and ride height control * Advanced torque management * On-board Wi-Fi * On-board data-logging (128MB) * AUTOMATIC TRANSMISSION CONTROL -- Ford AODE/4R70W -- GM 4L60E -- GM 4L80E -- Toyota A340E -- Lenco -- Liberty
Not Yet Reviewed
$2,535.00
SCT X4 Power Flash Programmers
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 99 )
$399.00
On Sale
Edge Pulsar LT Modules
Edge Pulsar LT modules are a one-of-a-kind in-line module that offers feature combinations never before seen in a standalone module. With the Pulsar LT you will be able to adjust throttle response levels, tire size adjustments, TPMS options, speed limiter, and more without having to tune or modify the vehicle. The Pulsar LT connects directly to your vehicle's computer system and makes its changes in-line with the other modules. Utilizing steering wheel controls, the Edge Pulsar LT owners can make all the changes that they desire at any time, driving or parked. The Pulsar LT module, in truth, is multiple products in one. Sure, you can go out and purchase a throttle booster, and then a separate calibration product to adjust tire size and TPMS, and possibly find a custom tuner to adjust the speed limiter but why clutter your vehicle with expensive products that only provide part of the solution you are looking for. The Edge Pulsar LT modules deliver serious options, seamless control, and does so affordably, with an innovative single easy-to-use solution. Product features: * Plug-and-play installation using factory connectors * Multiple throttle sensitivity levels * On-the-fly adjustability via steering wheel controls * Speed limiter adjustment * TPMS Adjustment * Tire size speedometer correction * Axle ratio * Read and delete DTCs * Auto start/stop * AFM/DFM disable * Manual DPF Regeneration * Engine idle up * Allison transmission relearn * Features vary by vehicle model
Not Yet Reviewed
$637.95
—
$789.95
$573.95
—
$709.95
On Sale
Edge EZ Plug-In Modules
These Edge EZ modules unleash the potential of this monster by carefully monitoring rpm, timing, turbo boost pressure, and fueling parameters, and adjusting the fueling and timing to maximize power, torque, and drivability. The Edge EZ modules allow maximum fueling at full turbo boost, and provide an additional 40 to 70 hp and up to 220 ft.-lbs. of torque. Simply plug in the Edge EZ connectors into two stock connections, and you're ready to go. These modules can also be stacked with other upgrades to deliver even more power. They can't be beat for easy installation and power upgrades. Go ahead, install an EZ today and feel the incredible difference it makes!
( 8 )
$562.95
$505.95
Rough Country Speedometer Calibrators
Your vehicles computer is designed to track the speed based on your stock tire height. When upgrading to larger tires, there will be a discrepancy between your actual speed and the readout on your speedometer. Rough Country speedometer calibration devices are easy to use to help you quickly reprogram your vehicles speedometer to match the output of your larger tires. These plug-and-play devices connect directly to your vehicle's diagnostic link connector port and in just a few short minutes your speedometer reads true again. Plus, they not only change your in-dash readout, but they also update your vehicles ECM, ensuring accurate shift points and proper electronic stability control. Finally, you can get an affordable and accurate speedometer calibration with an easy and intuitive setup process, thanks to Rough Country. Choose the device designed for your vehicle.
Not Yet Reviewed
$199.95
—
$259.95
On Sale
aFe Scorcher Blue Modules
aFe Scorcher Blue modules increase fuel pressure, turbo boost, and overall vehicle performance—producing double-digit power gains. Designed with factory-style connectors, they easily connect to engine sensors for a quick and simple installation. The LED control switch can be routed through the firewall into the cabin for a hard-wired solution, or you can connect wirelessly to the module via Bluetooth with the smartphone app. It's a free app in the Apple and Google Play stores, and allows your smartphone to become a hand-held remote. The aFe Scorcher Blue module has four power settings: Stock (green), Sport (yellow), Sport+ (orange), and Race (red). This is the fastest way to safely gain significant horsepower. Order the model designed for your specific vehicle.
( 1 )
$581.00
$522.90
On Sale
aFe Scorcher HD Modules
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$451.00
—
$462.00
$405.90
—
$415.80
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
On Sale
aFe Scorcher Modules
aFe Scorcher modules are designed to alter the pressure sensor signals to increase boost to an optimum level throughout the entire rpm range. The result is a harmonious balance between power, throttle response, and drivability. These modules provide a hassle-free installation with no cutting, drilling, or splicing required. In addition, vehicle factory electronic accessories are not affected by aFe Scorcher modules installation. Order the aFe Scorcher module that is best suited to fit your application needs. aFe Scorcher module features include: * Durable aluminum enclosure * Blue LED power light * OEM-style connectors * Direct plug-and-play power * High-temperature wire jacket material * Increases turbo boost to improve vehicle performance * Optimized for max performance when used with other aFe products (sold separately)
Not Yet Reviewed
$462.00
$415.80
Haltech Nexus R3 VCU with Universal Wire-In Harness Kits
Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full ECU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
Haltech Nexus R5 VCUs
Haltech Nexus R5 VCUs feature innovative, yet user-friendly technology, setting a new market standard for engine management and power distribution systems. Haltech Nexus R5 VCUs are 5-in-1 tools; an ECU, a PDM, a high-speed Wi-Fi module, dual channel wideband controller, and a data logger--all natively interconnected with each other and all are programmable with one single piece of software. Features: * 18 Injector drivers * 12 Ignition drivers * 12 8A outputs * 4 25A outputs * 23 AVI * 10 SPI * 8 DPO * 2 Knock control * 2 DBW control * Flex Fuel Support * Inertial measurement sensor * 4-channel oscilloscope * 3 Independent CAN bus systems * Wireless communication * 150 channel, 1kHz data logging with 512mb of logging space * Dual channel O2 wideband controller capable of running LSU4.9 and NTK sensors * Automatic transmission control Nexus R5 kits include: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna RP-SMA 108mm * Mounting bolts * USB-C cable * USB-C dust cap * USB drive with NSP software * Reverse mount VCU label * Quick-start guide and wiring diagrams
Not Yet Reviewed
$4,299.00
Dorman Remanufactured Transfer Case Control Modules
These Dorman remanufactured transfer case control modules are pre-programmed out of the box and install easily with plug-and-play wiring connectors. Factory transfer case control modules typically fail through corrosion under normal use; this results in the inability to shift in or out of 4WD mode. The modules are fully stress-tested for durability, so you can be sure that your 4WD won't get stuck in or out of gear next time.
( 19 )
$81.99
—
$226.95
Haltech Nexus R5 VCUs with Plug and Pin Set
Haltech Nexus R5 VCUs with plug and pin set combines the functionality of a power distribution module, a data logger, a dual channel wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Features: * 18 Injector drivers * 12 Ignition drivers * 12 8 amp outputs * 4 25 amp outputs * 23 AVI analog inputs with redundancy for electronic throttle and switchable 5 V pullup * 10 SPI synchronous pulsed inputs * 8 DPO low side drive outputs * 2 onboard wideband controllers, supporting NTK and LSU4.9 * 3 CAN ports with switchable termination Nexus R5 kits include: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna RP-SMA 108mm * Mounting bolts * USB-C cable * USB-C dust cap * Plug and pin set: -- AMP 26-pin key 1 and 3 -- 34-pin key 1 and 2 -- DTP-4
Not Yet Reviewed
$4,498.00
Holley Terminator X MAX Engine Management Systems
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 92 )
$1,849.95
—
$2,559.95
ACDelco ABS Control Modules
ACDelco ABS control modules meet or exceed OEM part specifications to help them deliver the same fit and performance as your factory equipment. ABS modules read the data from your speed sensor and send the correct pressure to each wheel, enabling you to maintain steering control and stop quickly under most conditions. Hundreds of models are available for vehicles from the 1990s and up. Select the replacement ABS control module recommended for your application.
( 2 )
$978.99
ACDelco Accessory Control Modules
ACDelco offers a variety of accessory control modules—from active noise cancellation and theft control modules, to A/C and DC power control modules and more. These OE-style replacements are designed, engineered, and tested to rigorous standards to ensure proper fit and performance. Nearly a hundred models are available for countless vehicles from the 1990s and up. Order the accessory control module recommended for your application.
Not Yet Reviewed
$32.99
