Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
51 Results Found For "fuel injection kit"
Holley EFI CAN Input/Output Modules Kits
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$499.95
Holley Terminator X Max GM Gen V LT Direct Injection Kits
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,149.95
—
$3,649.95
Edelbrock Pro-Flo 4 Engine Control Units
For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.
( 5 )
$654.95
FiTech Ultimate TPI Standalone ECUs
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$847.00
—
$1,060.00
FiTech Sync 24 Engine Management Systems
FiTech offers a wide range of products designed to control fuel injection, fuel delivery, ignition, transmission, and many other key systems in your vehicle. Their Sync 24 Engine Management System is the latest in cutting-edge technology, ultimately aimed at enhancing performance and fuel economy via data collected from an array of sensors, relays, actuators, and ECU. These electronic and electrical components work together to govern various engine functions efficiently per established parameters. Modern cars and trucks increasingly rely upon an EMS as the computer system "brains" to ensure that all engine related parts are working "in sync" with each other to deliver the very best driving experience. The Sync 24 systems are ideal for a variety of Chevy small block and big block engine applications from the 1950s and up. Rely on the expertise of FiTech engineers when selecting an Engine Management System replacement or upgrade for your car, truck, or SUV.
Not Yet Reviewed
$1,794.00
FiTech Ultra Port EFI Standalone ECUs
FiTech Ultra Port EFI standalone ECUs are universal upgrades for your vehicle. These engine management systems are compatible with up to eight injectors; and feature single wideband controller and CANBUS-enabled capabilities. Electronic control units are computers that manage many functions in your vehicle, including the engine, transmission, and safety systems. They typically control the fuel injection, ignition, and fuel/air ratio, emissions, climate control and entertainment.
Not Yet Reviewed
$1,199.00
Holley HP EFI ECU and Harness Kits
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$2,049.95
—
$3,949.95
Ford Performance Parts 5.0L Coyote Power Module with T-56 Manual Transmission Combo Kits
Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.
Not Yet Reviewed
$19,699.99
FAST EZ-EFI 2.0 Multi-Port Retro-Fit Kits
FAST EZ-EFI 2.0 Multi-Port Retro-Fit kits allow owners of existing factory or aftermarket multi-port fuel injected applications and intake manifolds to experience the benefits of an EZ-EFI 2.0 system with no limit on horsepower—because the systems are based on each customer's supplied injectors. The next generation of the revolutionary self-tuning EZ-EFI has been upgraded with more features than ever before. Yet it maintains ease of use that doesn't require a laptop or tuning experience. As with the original EZ-EFI, simply hook up the system, answer the Setup Wizard questions on the hand-held, and EZ-EFI 2.0 tunes itself as you drive. The new high-quality wiring harness (with a sleek mesh-type loom) uses commonly available late model OEM sensors for accuracy and durability. The EZ-EFI 2.0 has an updated hand-held, as well, featuring the industry's first color touch screen. Self-powered through the ECU rather than requiring an outside power source, it shares the same mounting points as the Garmin Nuvi GPS—meaning there are nearly limitless mounting options (suction cup mount is included with all kits). Serving as the Setup Wizard initially, it then becomes an electronic gauge screen. The hand-held has various advanced features, including screen hide/sleep function, expanded diagnostics and data screens, plus intuitive navigation. Electronic fuel pressure measurement is standard on all kits—and all kits work with wet nitrous systems, providing built-in nitrous timing retard and special nitrous AFR targeting. EZ-Ignition features an EZ-Solution option, meaning that it is plug-and-play with FAST Dual-Sync distributors for electronic timing control, or can be used with an EFI distributor of your choice and a FAST crank trigger. Or the system can be used to control fuel only and be used with a standard carb-type distributor where timing is set manually. Experience the advantage of fuel injection without the headaches; order a FAST EZ-EFI 2.0 Multi-Port Retro-Fit kit.
( 10 )
$1,589.95
Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits
Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.
Not Yet Reviewed
$1,364.95
—
$1,428.95
FiTech Ultimate LS Standalone ECUs
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$567.00
Edge EAS Street Diesel Kits
Edge EAS Street Diesel kits give users the ability to monitor EGTs, boost pressure and fuel pressure—exactly what most diesel owners want to see. These kits are designed for those truck owners who have upgraded their rigs with larger turbos, performance lift pumps, and maybe even injectors, where the stock sensors just aren't enough anymore. The kits are ideal for hot street trucks, daily drivers, and towing applications. The EGT probe can easily be installed in the exhaust manifold for the most accurate cylinder temps. The EAS 0-100 psi sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. The second 0-100 psi sensor can be easily installed on an aftermarket lift pump or anywhere in the low-pressure fuel side to monitor lift pump pressure, ensuring your injection system is getting all the fuel it needs. All-new Street Diesel kits save money over buying the three sensors separately and offer another great solution for those with aftermarket performance accessories on their diesel. Product details: * 1 EAS Starter Kit * 1 EAS EGT Probe * 2 EAS 0-100psi Pressure Sensors * 1 EAS Universal 5 V Harness Kit (accepts two pressure sensor kits)
Not Yet Reviewed
$409.95
Ford Performance Parts 5.0L Coyote Power Module with 10-Speed Automatic Transmission Combo Kits
Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!
Not Yet Reviewed
$19,555.99
Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits
Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.
Not Yet Reviewed
$1,126.95
Edelbrock Legacy Pro-Flo to Pro-Flo 4 EFI Upgrade Kits
Edelbrock upgrade kits provide an economical solution for users of existing Pro-Flo 1, 2, or 3 EFI systems to move up to the Pro-Flo 4 EFI. These kits include a harness, supporting sensors, ECU, wideband O2 sensor, wiring harness, IAC valve, and IAC adapter, and each system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. Upgrade your legacy Pro-Flo EFI system to a Pro-Flo 4 with an Edelbrock Pro-Flo upgrade kit. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors, as well as a Pro-Flo distributor, fuel pump, regulator, and fuel lines.
Not Yet Reviewed
$1,218.95
Edelbrock Pro-Flo 4 LS Self Learning Engine Management Systems
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,210.95
—
$1,222.95
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management Systems
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,505.95
FAST XFI 2.0 Engine Control Units
FAST XFI 2.0 engine control units deliver--fast! Utilizing the latest technology, FAST XFI 2.0 units can process, analyze, and adjust four times quicker than previous EFI systems. The C-Com XFI Windows-based software is easy to navigate and features field-flashable capabilities, so you can download the latest software updates via email or directly from FAST. These XFI control units also feature Qwik Tune for programming without a laptop. Pre-program up to four different EFI maps--optimize a setting for your daily driving, one for racing conditions, and still another for fuel economy. You'll enjoy on-board diagnostics, EZ Test indicator lights, 5-bar MAP sensing and controls, plus enhanced data-logging capabilities and memory. Some of the FAST XFI 2.0 engine control units' standard features include: * Built-in wideband O2 * Fully sequential and/or bank-to-bank capability * Individual cylinder correction * Fan and fuel pump control * Dynamic scaling of vectors in 2D and 3D tables * Torque converter lockup control * Air conditioning wide-open throttle cutout * Boost control * Fuel and oil pressure logging * Adjustable injector timing * Multiple ignition strategies
( 1 )
$2,421.95
Holley Dominator EFI Vehicle Management Systems
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,149.95
—
$3,499.95
DIYAutoTune MicroSquirt Engine Management Systems
The versatile DIYAutoTune MicroSquirt Standalone Engine Management System with 8 ft. harness is an entry-level, fully assembled ECU and universal 30 in. pigtail with varied applications—targeting powersports, single cylinder all the way up to 8 cylinders with up to two fuel and four spark outputs. Over 40 different ignition modes are supported—from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis … to unusual modes like Renix Jeep and the Suzuki Swift GTI. MicroSquirt ECU hardware features: * 2 high impedance injector outputs; max peak current 4.5 amps * 2 dedicated spark outputs * 2 general purpose on/off outputs; can be repurposed as spark outputs * 1 PWM IAC output; can be repurposed as general purpose output * 1 dedicated fuel pump output * 2 variable reluctor conditioned inputs * 1 optoisolated RPM input * 1 flex fuel or general purpose switched input * 7 analog inputs MicroSquirt ECU software features - Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables - 0.66 microsecond injector pulse width resolution - Allows blending multiple load types, including specialized mode for independent throttle bodies - Supports a wide variety of OEM cam and crank position sensors - Accelerator pump or model-based acceleration enrichment - Closed or open loop idle speed and boost control - On/off nitrous control - Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables - Staged injection - Table switching - 16 x 16 fuel tables - 12 x 12 spark tables - 2 step rev limiter (launch control) with no-lift shifting - Wideband AFR target table - Flex fuel sensor input - Real time barometric correction (external sensor required) - Sequential shift cut and air shifter control MicroSquirt with 8 ft. Harness Transmission Control Options: * MicroSquirt transmission control-free firmware allows you to use MicroSquirt with 30 in. harness to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of DIY's ECUs over canbus. * Control applications: GM 4L60E I GM 4L80E I GM 4T40E I GM 5L40E (dev) I A341E I 41TE (dev) I Ford 4R70W I Ford E40D (dev) I Subaru W4A33 and more. MicroSquirt with 8 ft. Harness CAN I/O Box Expansion: * Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug-n-play I/O extension box for MS3 or MS3Pro ECUs. It can offer a useful I/O addition: - 7 Analog inputs (0-5 V variable) - 2 Wheel speed inputs (VR or hall type) - 2 Wheel speed (hall type) or ground-switch inputs - 1 dedicated ground-switch input - 2 high current PWM/switch ground-switching outputs - 4 mid current PWM/switch ground-switching outputs - 1 low current PWM/switch 0-12 V output - Perfect for capturing and logging vehicle speed and additional sensor data
( 5 )
$388.00
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,149.99
—
$1,499.99
Holley Hilborn Universal Terminator X MPFI Systems
The Hilborn EFI-R manifold systems combine electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. Holley Hilborn Universal Terminator X MPFI systems provide cutting edge EFI technology, and are intended for the most serious naturally aspirated performance enthusiast. Each kit includes a CAN-USB tuning dongle, so you can tune your EFI system specifically for your engine via Holley's free Terminator X EFI software. Also included is a universal main harness, EV1 injector harness, Bosch LSU 4.9 wideband, input/output harness, and main power harness. These kits are for use with Hilborn EFI-R intake manifolds: * 300-800 for Big Block Chevrolet applications requiring 2 7/16 in. throttle bores * 300-801 for Big Block Chevrolet applications requiring 2 5/8 in. throttle bores * 300-807 for Big Block Chevrolet applications requiring 3 in. throttle bores
Not Yet Reviewed
$1,299.95
FAST XFI Sportsman EFI Engine Control Systems
For cars with an identity crisis (they don't know if they're a street car or a race car), XFI Sportsman electronic fuel injection systems fill a hole in the middle of the FAST lineup. They're designed to satisfy the enthusiast who does spend some time racing, but also spends time cruising. These EFI engine control systems will serve to simplify the tuning process and give you the capability to control the engine with greater control and precision than currently exists. When we say simple, we mean really simple--installation is a snap, and if you've ever worked with tuning software in the past, XFI's C-Com software will be familiar to you. If not, then you can use the self-tuning option and be off to the races as you learn the capabilities of your new system. The FAST systems ship with an ECU, wiring harnesses, wideband oxygen sensor, and electronic fuel pressure kit.
( 5 )
$1,712.95
—
$1,931.95
Haltech Elite 2500 ECU with Plug and Pin Set
Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,044.00
