Availability
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.
( 4 )
$654.95
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$734.99
Level up your Ford Ranger Raptor 3.0L EcoBoost engine's performance with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2024 Bronco Raptor (2025 available for non-California vehicles) * Improved throttle response throughout the rpm range * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
( 1 )
$876.99
Upgrade your 2021-2023 Ford F-150's 3.5L EcoBoost engine's capability with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 F-150 with 3.5L engine (non-Raptor models) * Improved throttle response throughout the rpm range * Peak power = 450 hp @ 5,250 rpm, +55 hp @ 5,250 rpm * Peak torque = 510 lbs.-ft. @ 3,500 rpm, +100 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: Does not fit 3.5L Powerboost Hybrid engines. Not applicable to Raptor models. Not for use in F-150 Lightning. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions please contact Tech Line.
Not Yet Reviewed
$792.99
Enhance your 3.5L EcoBoost engine's performance in your F-150 Raptor with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance to fit 2021-2023 Raptor F-150 equipped with 3.5L engine only * Peak power = 466 hp @ 5,500 rpm, +26 hp @ 3,250 rpm * Peak torque = 554 lbs.-ft. @ 3,250 rpm, +54 lbs.-ft. @ 2,500 rpm * Improved throttle response throughout the rpm range * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * ProCal 4 delivery tool with mounting bracket included * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: For Raptor F-150 equipped with 3.5L engine only. ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$824.99
Enhance the performance of your 2.3L engine in your 2021-23 Bronco. The Ford Performance engineered and dyno-tested calibration delivers more power and increased performance without sacrificing reliability. Additional details: * Improved throttle response throughout RPM range * Optimized shift schedule for automatic transmission equipped vehicles * Down-shift rev matching for manual transmission equipped vehicles * Peak torque = 385 lbs.-ft. at 3,500 rpm * Peak power = 330 hp at 5,500 rpm * Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile); additional modifications required * Ability to change axle/FDU ratio up to 5.38 * Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module * For U.S. and Canadian vehicles * M-12655-F ProCal 4 delivery tool included * Premium fuel required * The M-9603-B27 calibration is also available --- Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur. --- ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
Not Yet Reviewed
$730.99
Add excitement with the Ford Performance calibration for 2024 Ranger 2.3L EcoBoost. This calibration increases power and improves performance throughout the RPM range. Additional details: * Ford Performance engineered and dyno tested * Peak output: 322 hp at 5,500 rpm * Peak torque: 359 lbs.-ft. at 2,500 rpm * Improved drivability and throttle response throughout RPM range * Optimized shift schedule * Horsepower gain: 45 hp at 4,500 rpm * Torque gain: 60 lbs.-ft. at 2,500 rpm * For U.S. and Canadian vehicles * Premium fuel – 91 octane or higher is required * Includes Ford Performance ProCal 4 calibration delivery tool * Does not affect trailer towing * NOTES: -- ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". -- ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
Not Yet Reviewed
$708.99
Enhance the performance of the 2.7L EcoBoost engine in your 2021-23 F-150. Ford Performance Parts calibrations are engineered and dyno tested to increase power and performance while maintaining reliability. Additional details: * Peak Power = 355 hp at 5,500 rpm * Peak Torque = 433 lbs.-ft. at 3,500 rpm * Improved throttle response throughout rpm range * Optimized shift schedule * Premium fuel required * Fits 4x2 and 4x4 models * For all cab configurations and trim levels * For US and Canadian vehicles * M-12655-F ProCal 4 delivery tool included * (Tire size and gear ratio cannot be adjusted). *NOTES: -- ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode." -- ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
Not Yet Reviewed
$709.99
Enhance the performance of the 2.7L EcoBoost engine in your Ranger with Ford Performance Parts calibrations that are engineered and dyno tested to increase power and performance while maintaining reliability. Product details: * Fits 4x4 models (2.7L not available in 4x2 models) * For all cab configurations and trim levels * Peak Power = 355 hp at 5,500 rpm * Peak Torque = 433 lbs.-ft. at 3,500 rpm * Improved throttle response throughout rpm range * Optimized Shift Schedule * Premium Fuel Required (91 octane minimum) * For US and Canadian vehicles * 3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician * 50-state approved (California C.A.R.B. EO#: D-431-8) * (M-12655-F) ProCal 4 delivery tool included Important Notes: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". The ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically. Calibration and ProCal 4 tool are VIN locked. Please contact the Tech Line if you have additional questions.
Not Yet Reviewed
$738.99
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,505.95
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 3 )
$1,495.00
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 28 )
$133.00
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$829.99
—
$869.99
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 2 )
$2,083.99
—
$2,149.99
On Sale
FuelTech FT550 EFI systems were developed and created to put you in control! The FT550 ECU is an engine fuel control and monitoring system: electronic fuel injection, integrated dashboard, data acquisition, and power management system all-in-one! It uses the same FTManager software as the FT600, with the same features and functionalities--including the newest update that allows the user to update their fuel map by applying the oxygen closed loop corrections that took place from a log file. Map files of all the PowerFT ECUs are compatible with each other, meaning that you can upgrade ECUs and keep the same tune you had already. The dashboard design of the FT550 ECU systems feature an engine start button, new inclinometer gauges; and virtual LEDs for arrows, headlights and other functions. The touch screen allows editing the maps directly on the module (without the need for computer use) and seamless integration between the ECU and vehicle dashboard. More key features and benefits: * Sturdy, waterproof plastic case automotive connectors with 52 pins, USB communication and two CAN Bus ports, 14 inputs and 24 outputs that are fully configurable * Best ECU for projects that require more features, including GearController (power-shifts), built-in accelerometer (G-meter) and gyroscope; in addition to all PowerFT ECU line features such as sequential injection and ignition, O2 closed loop, active traction control, integrated BoostController, internal datalogger, progressive and PRO-Nitrous controls, odometers, electronic throttle control, inclinometer, drag racing features and more
( 3 )
$1,699.00
$1,299.00
On Sale
FuelTech's FT600 EFI systems are the perfect association between the ECU and the dashboard—which makes them the world's most complete solution, presenting both features combined! Developed on the PowerFT platform, already praised for FuelTech's FT500 version, the FT600 EFI Systems offer new features, such as: the new Superseal automotive connectors that add up to 68 pins (20 sensor inputs and 32 outputs), accelerometer and gyroscope, two CAN networks, and a built-in GearController. The last feature enables the direct connection with the strain gauge sensor on the shifter, bringing new possibilities for more efficient engine gearshift cuts. In addition, FT600 EFI systems also present a pack of beloved racing functions used all over the world that cover time-based launch features, boost control, staging control, Pro-Nitrous control, advanced internal datalogger—just to name a few! More features and benefits: * Extreme high-quality aluminum housing, which is also waterproof to IP67 standards * Anti-glare TFT touch screen display and a redesigned dashboard exclusively developed to grant the driver an easier viewing experience * Touch screen display makes it possible to make map adjustments directly on the ECU, without the use of a laptop * Able to manage sequential injection and ignition on engines from 1 up to 12 cylinders (or up to 4 rotors); and comes with an option for simplified maps, which allows making initial adjustments easier or 3-D maps for more advanced applications * New ECU presents individual cylinder injection and ignition trim; plus exclusive features that help on the first engine start; and also contains an advanced and efficient closed loop fuel control for engine safety * Design includes an upper visor that reduces glare and houses 10 LED lights that are color and intensity adjustable, suitable for a progressive shift light * 4 additional LED lights on the side of the ECU that are adjustable for diagnosing, alerts, and current status of any sensor * Uses FTManager software, with all resources and existing functions as the FT550 * Compatible with all existing features and FT500 maps to allow you to open, edit and save maps through an interactive interface that is easy to use
Not Yet Reviewed
$2,699.00
$2,199.00
The versatile DIYAutoTune MicroSquirt Standalone Engine Management System with 8 ft. harness is an entry-level, fully assembled ECU and universal 30 in. pigtail with varied applications—targeting powersports, single cylinder all the way up to 8 cylinders with up to two fuel and four spark outputs. Over 40 different ignition modes are supported—from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis … to unusual modes like Renix Jeep and the Suzuki Swift GTI. MicroSquirt ECU hardware features: * 2 high impedance injector outputs; max peak current 4.5 amps * 2 dedicated spark outputs * 2 general purpose on/off outputs; can be repurposed as spark outputs * 1 PWM IAC output; can be repurposed as general purpose output * 1 dedicated fuel pump output * 2 variable reluctor conditioned inputs * 1 optoisolated RPM input * 1 flex fuel or general purpose switched input * 7 analog inputs MicroSquirt ECU software features - Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables - 0.66 microsecond injector pulse width resolution - Allows blending multiple load types, including specialized mode for independent throttle bodies - Supports a wide variety of OEM cam and crank position sensors - Accelerator pump or model-based acceleration enrichment - Closed or open loop idle speed and boost control - On/off nitrous control - Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables - Staged injection - Table switching - 16 x 16 fuel tables - 12 x 12 spark tables - 2 step rev limiter (launch control) with no-lift shifting - Wideband AFR target table - Flex fuel sensor input - Real time barometric correction (external sensor required) - Sequential shift cut and air shifter control MicroSquirt with 8 ft. Harness Transmission Control Options: * MicroSquirt transmission control-free firmware allows you to use MicroSquirt with 30 in. harness to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of DIY's ECUs over canbus. * Control applications: GM 4L60E I GM 4L80E I GM 4T40E I GM 5L40E (dev) I A341E I 41TE (dev) I Ford 4R70W I Ford E40D (dev) I Subaru W4A33 and more. MicroSquirt with 8 ft. Harness CAN I/O Box Expansion: * Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug-n-play I/O extension box for MS3 or MS3Pro ECUs. It can offer a useful I/O addition: - 7 Analog inputs (0-5 V variable) - 2 Wheel speed inputs (VR or hall type) - 2 Wheel speed (hall type) or ground-switch inputs - 1 dedicated ground-switch input - 2 high current PWM/switch ground-switching outputs - 4 mid current PWM/switch ground-switching outputs - 1 low current PWM/switch 0-12 V output - Perfect for capturing and logging vehicle speed and additional sensor data
( 5 )
$388.00
The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 9225-R kit includes an industry-leading Trinity 2 on-dash tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the Trinity 2 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. And it doesn't stop there with T2. The full color, 5 in. touch screen allows you to keep an eye on all your vital engine data. The on-screen gauges deliver all the info you want to see, in real time. Of course, it can also record data for playback on our DV2 software for further analyzation. T2 also enables you to set up virtual alerts, and supports the Expandable Accessory System (EAS) for adding and logging additional external sensors. The device is internet updateable, either through DiabloSport's Update Agent software or through its built in WiFi. Get power you can feel—with DiabloSport! DiabloSport Trinity 2 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Full-color 5 in. touch screen * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck! * Customizable gauge layouts and background images * Supports DiabloSport's Expandable Accessory System * Includes windshield mount
Not Yet Reviewed
$949.95
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
Pacific Performance Engineering Standard Xcelerator tuners are specifically designed to provide better throttle response and shifting characteristics, while adding big power without the need for expensive fueling and air upgrades. They provide up to five power tuning levels of additional horsepower and torque (40 to 225 hp depending upon model). The tuners will optimize a stock engine's performance--especially those with added perks such as a free-flowing exhaust and a cold air intake system. Additional facts, features, and specs: * Speedometer corrections (for tire sizes 25 through 44.75 in. at 1/4 in. increments) * Adjustable speed limiter (from 40 to 96 mph in 1 mph increments, or directly to 200 mph) * Adjustable gear ratio from 2.73 to 5.13 * Reads and clears DTC's * Reads real-time data (for engine diagnostics) * Transmission reset and quick-learn feature * Online updates available * DPF Regeneration (LMM engine)
( 3 )
$449.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
