25 Results Found For "exhaust kit"

Individual Parts

Part Groups

Results 1 - 24 of 25

SCT Exhaust Gas Temperature Kits

Now you can monitor your exhaust gas temperature through your SCT device instrumentation system! These SCT exhaust gas temperature sensor kits allow you to monitor your exhaust gas temperature so you can tune for maximum performance. Product features: * Plug and play with SCT's devices * Works with SCT device warning lights * Easy installation * Monitor your vehicle's EGT temps

3.33 out of 5 stars ( 3 )

$151.99

On Sale

Edge EAS Street Diesel Kits

Edge EAS Street Diesel kits give users the ability to monitor EGTs, boost pressure and fuel pressure—exactly what most diesel owners want to see. These kits are designed for those truck owners who have upgraded their rigs with larger turbos, performance lift pumps, and maybe even injectors, where the stock sensors just aren't enough anymore. The kits are ideal for hot street trucks, daily drivers, and towing applications. The EGT probe can easily be installed in the exhaust manifold for the most accurate cylinder temps. The EAS 0-100 psi sensor is the perfect sensor for an aftermarket turbo that can build more boost than the stock MAP sensor can read. The second 0-100 psi sensor can be easily installed on an aftermarket lift pump or anywhere in the low-pressure fuel side to monitor lift pump pressure, ensuring your injection system is getting all the fuel it needs. All-new Street Diesel kits save money over buying the three sensors separately and offer another great solution for those with aftermarket performance accessories on their diesel. Product details: * 1 EAS Starter Kit * 1 EAS EGT Probe * 2 EAS 0-100psi Pressure Sensors * 1 EAS Universal 5 V Harness Kit (accepts two pressure sensor kits)

Not Yet Reviewed

$409.95

$367.95

Haltech Elite 2500 ECU Nissan RB Terminated Engine Harness Kits

Haltech offers several Elite 2500 ECU Nissan RB terminated engine harness kits for Nissan's RB twin cam and RB30 single cam engines. Options include a basic kit (no ignition or CAS sub-harness), kits with a Series 1 (early) or Series 2 (late) ignition harness, or LS1 coil and CAS sub-harness. All options include Haltech's Elite 2500 ECU ideal for popular late model performance and racing applications, featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 2500 is paired with Nexus Software Programmer (NSP) for functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Select the Haltech Elite 2500 ECU terminated engine harness kit designed for your Nissan RB engine.

Not Yet Reviewed

$2,928.00

—

$3,150.00

Banks Power Ford 2011-2015 6.8L V-10 Class A Motorhome PowerPack Systems

Banks Power Ford 2011-2015 6.8L V-10 Class A Motorhome PowerPack systems eliminate factory restrictions with free-flowing intake and exhaust components to boost performance, efficiency, and engine life, while adding hefty power—all at a modest cost. They also stretch your driving time between fill-ups! The PowerPack components work in concert to optimize power, torque, mileage, and durability. After years of real-world Research and Development on the open road, the folks at Banks Power know what it takes to efficiently get every extra ounce of horsepower and torque out of your 6.8L Ford V-10 engine in order to get your Class-A Motorhome running at its full potential. With its free-flowing components and mandrel-bent tubing that dramatically reduce back-pressure, your Ford Class-A Motorhome will instantly gain an overall improvement in horsepower, torque, throttle response and fuel economy.

Not Yet Reviewed

$2,769.00

—

$3,269.00

On Sale

Range Technology DFM Modules

Range Technology DFM modules are designed for late model GM refresh trucks and SUV's. This innovative device is the first in the market to provide a solution for disabling the dynamic fuel management system in these vehicles. By installing the DFM Module, users can effectively override the vehicle's built-in cylinder management system, allowing the engine to run on all cylinders, all the time! This leads to a better driving experience, and better long term engine reliability. This device is a true dual threat eliminating the most frustrating features your brand new truck or SUV's came equipped with, DFM and engine auto start/stop. By simply plugging this device on to your ECM, both systems will remain inactive at all times, leaving you with the peace of mind your engine will run more consistently without issues or interruption. Just hop in and drive without the worry of cylinders cutting off leaving you powerless or the engine shutting off at every stop sign, creating a hesitation on take-off or killing power to your in-cabin luxuries like A/C and rear entertainment systems. Features: * Disables dynamic fuel management (DFM) and engine auto start/stop systems * Smart inline technology integrates seamlessly with the ECM * Allows a true 'return to stock' status when removed with no trace for worry free dealer services * All-time V8 mode means better power on demand, a more consistent driving experience, reduced engine and valvetrain wear, and improved long term engine reliability * Enjoy that V8 rumble and avoid unpleasant exhaust notes and drone from running in cylinder deactivation mode * Plug-and-play installation can be completed in minutes * Some applications may still encounter 0-Cylinder Mode while coasting when 0% throttle input is detected at the ECM * 49-State Emissions Compliant * Made in USA

5.0 out of 5 stars ( 18 )

$511.95

$459.95

Banks Power Ford 1994-97 7.3L Powerstroke PowerPack Systems

Banks PowerPack systems optimize your Ford 1994-97 7.3L Powerstroke engine for maximum airflow, horsepower, torque, and efficiency in one convenient package. Banks Power manufactures these kits from quality materials to ensure performance and durability. Kits include: * Ottomind computer programmer (PowerPak calibration) * Ram Air filter and service kit * Techni-Cooler intercooler assembly with TwinRam manifold inlet * Powdercoated steel boost tubes * Monster stainless steel 3.5 in. tailpipe * 4.0 in. stainless steel exhaust tip * Transcommand transmission management module * Dynafact pyrometer * Boost gauge assembly

Not Yet Reviewed

$3,549.00

—

$3,849.00

Haltech Elite 1500 ECU with Premium Universal Wire-In Harness

Haltech offers a variety of engine management systems, including the Elite 1500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Countless ECU, advanced tuning, and race functions * Outputs: Up to 4 injector and 4 ignition * Suits: Universal 1-12 cylinder or 2 rotor applications * Includes: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB software key.

Not Yet Reviewed

$2,049.00

—

$2,228.00

Haltech Elite 2500 ECU with Basic Universal Wire-In Harness

Haltech's Elite 2500 ECU with basic universal wire-in harness is ideal for dedicated race cars, engine swaps and custom wiring jobs. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 2500 provides engine calibrators with the tools they need to get the job done right. The basic universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your 2500 ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! The Elite 2500 ECU is now paired with new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to both tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, basic universal wire-in harness, and USB programming cable * Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications * Recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts (does not include fuse and relay box) * Supports 1 to 12-cylinder engines, 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software

Not Yet Reviewed

$2,319.00

Haltech Elite 2500 ECU with Premium Universal Wire-In Harness

Haltech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.

Not Yet Reviewed

$2,409.00

—

$2,588.00

On Sale

Edge Expandable EAS EGT Sensors

Edge EAS expandable EGT sensors allows you to monitor temperatures in different locations. Edge accessory systems are designed for expandability, and this permits you to connect multiple exhaust gas temperature sensors to ensure that the added power is not creating excessive heat. With Edge expandable EAS EGT sensors, you can compare readings in different areas to be even more precise with your temperature data.

4.91 out of 5 stars ( 11 )

$191.95

$172.75

On Sale

Edge EZX Modules With Insight CTS3

The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.

5.0 out of 5 stars ( 1 )

$1,149.95

—

$1,399.95

$1,033.95

—

$1,258.95

Haltech Elite 2500 ECU with Plug and Pin Set

Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software

Not Yet Reviewed

$2,044.00

Bully Dog Sensor Docking Stations

Bully Dog sensor docking stations offer an unparalleled glimpse into the comparative health of your vehicle. These accessories for the GT and Watch Dog product lines make it easy to install aftermarket automotive sensors onto your modern vehicle, and then display those specific values. They support a multitude of different measuring device types, including pressure (oil and/or boost), speed, and temperature sensors (exhaust, transmission and/or air intake). Bully Dog sensor docking stations are a superb, easy way for you to instantly check on the well-being of your vehicle.

4.5 out of 5 stars ( 2 )

$171.99

Haltech Elite 550 ECU with Basic Universal Wire-In Harness

Haltech's Elite 550 is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, four fuel and four ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or Haltech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (peak and hold (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temperature, and Air Temperature) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for HalTech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam --- HARNESS OVERVIEW: * Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your HalTech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * When installed in conjunction with a HalTech Elite ECU, the harness opens the door to virtually limitless performance modification and tuning of your vehicle.

Not Yet Reviewed

$1,210.00

Haltech Elite 1500 ECUs with Plug-and-Play Harness

Haltech Elite 1500 ECUs with plug-and-play harness provide the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and these Haltech plug-and-play products allow you to be up and running in just a few hours. A quick-start guide will walk you through installation of the Haltech plug-and-play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, or engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2-rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use Harness features: * An efficient Haltech plug-and-play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the HalTech plug-and-play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * The Haltech output IGN-1A and 13B coil terminated harness models connect to the Haltech IGN-1A ignition coils (ignition coils not included please order 4 x HT-020114 if required)

Not Yet Reviewed

$2,668.00

—

$2,757.00

Haltech Elite 2500 ECU with Plug'n'Play Harness

Haltech's Elite 2500 ECU with Plug'n'Play harness provides the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and this plug-and-play product allows you to be up and running in just a few hours. The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, and 8-cylinder, drive-by-wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof Case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software Harness features: * An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration Notes: Please confirm your alternator connector (see the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) ignition coils and harnesses are not included, Please order 8 x HT-020102 and/or HT-045657 if required.

Not Yet Reviewed

$2,629.00

—

$3,549.00

Haltech Elite 1500 ECU with Basic Universal Wire-In Harness

Haltech Elite 1500 ECU with basic universal wire-in harness is ideal for dedicated race cars, engine swaps and custom wiring jobs. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 1500 provides engine calibrators with the tools they need to get the job done right. The basic universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your 1500 ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! The Elite 1500 is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to both tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 1500 ECU with DBW and Race Functions, basic universal wire-in harness. waterproof USB cap, and USB programming cable (does not include fuse and relay box) * Elite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications * Recommended for 4-cylinder, drive-by-wire (DBW) or 2 rotor engines, EFI conversions, engines with multiple variable camshafts * Supports 1 to 12-cylinder engines, 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multi-point injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use * Color-coded and labelled wires that match the detailed wiring diagram for a confusion-free construction process * The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration

Not Yet Reviewed

$1,959.00

Haltech Elite 550 ECU with Premium Universal Wire-In Harness

Haltech's Elite 550 is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, 4 fuel and 4 ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is paired with the Nexus Software Programmer that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Premium universal wire-in harnesses are available in 8 ft. or 16 ft. lengths * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or Haltech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temp, and Air Temp) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for Haltech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam --- HARNESS OVERVIEW: * Ideal for dedicated race cars, engine swaps, and custom wiring jobs. The universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * When installed in conjunction with a Haltech Elite ECU, the harness opens the door to virtually limitless performance modification and tuning of your vehicle.

Not Yet Reviewed

$1,362.99

Haltech Elite 1500 ECU with Plug and Pin Set

Haltech's Elite 1500 ECU with plug and pin set is ideal for popular late model performance and racing applications. The Elite 1500 is a two-connector, stand-alone ECU that provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 1500 ECU with plug and pin set * Plug and pins only amp 26 and 34-pin, 4-row, 3-Key Superseal Set * Recommended for 4-cylinder, drive-by-wire (DBW), or 2 rotor engines, EFI conversions, and engines with multiple variable camshafts * Elite 1500 ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake, and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more * Supports 1 to 12-cylinder engines and 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45-channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use

Not Yet Reviewed

$1,684.00

On Sale

Edge EZX Modules

The Edge EZX module is the next-generation inline performance module engineered for today's most powerful diesel trucks. Designed for simple, plug-and-play installation, the EZX connects directly to your factory system in minutes with no cutting or splicing required. Once installed, you'll unlock on-the-fly power level adjustments using the intuitive Edge smartphone app, giving you total control of your truck's performance right from your phone. Whether you're towing heavy loads, daily driving, or pushing your truck to the limit, the EZX is built to deliver. Enjoy instant throttle response, improved drivability, and up to 1,200 ft-lbs of torque to the tires. Engineered to be emissions safe and warranty-friendly with no trace when removed, the EZX offers safe, reliable power without compromise. NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app

4.38 out of 5 stars ( 8 )

$767.95

$511.95

—

$690.95

Haltech Elite 550 ECU with Plug and Pin Set

Haltech's Elite 550 (with plug and pin set) is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, four fuel and four ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Plug and Pins: AMP 34 Pin 4 Row 3 Key Superseal * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or Haltech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (peak and hold (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temperature, and Air Temperature) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP calibration software --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for Haltech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines * ECU comes fully enabled, with no additional charges for advanced features --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Limitless tuning flexibility: Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. Dual mapping is a thing of the past. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Variable cam control: Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam

Not Yet Reviewed

$986.99

Haltech Elite 1500 ECU

Haltech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits

Not Yet Reviewed

$1,599.00

Haltech Elite 550 ECU

Haltech's Elite 550 is a simple yet powerful ECU ideal for basic 4- to 8-cylinder or 1-2-rotor engine applications. Suitable for either naturally aspirated or forced induction engines, the Elite 550 gives you full control over fuel delivery, ignition timing and boost levels. This robust, competitively priced ECU features an environmentally sealed, waterproof case, four fuel and four ignition channels, and a 4 BAR internal MAP sensor. The Elite 550 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional details: * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Sequential, semi-sequential, batch or multipoint injection patterns * Ignition modes include direct fire multi-coil, distributor ignition, or Haltech CDI systems * Connect to a wide range of dashes, displays, and expansion devices via CAN * Waterproof case (IP67) with USB cover fitted * 34 position AMP connector * 4 x fuel injection outputs (peak and hold (0-8 amps peak / 0-2 amps hold) * 4 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 1 x digital pulsed input * 5 x digital pulsed outputs * 1 x analog voltage input * 3 x dedicated inputs (Throttle Position, Coolant Temperature, and Air Temperature) * Internal 4 Bar MAP sensor measuring up to 300kPa/3Bar/45psi of boost pressure * Up to 33 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP calibration software --- ECU FUNCTIONS: * Oxygen control: Closed loop with long-term learning for precise tuning (with optional external CAN O2 wideband controller kit) * Boost control: Closed loop with learning with flexible user-definable axis and six fully user-definable corrections modes (for example, boost by gear, road speed etc.) * Flex fuel function (direct sensor input): Tune your engine's boost, fuel and ignition by ethanol content * Low impedance injector control with programmable injector peak and hold currents * Closed loop idle speed control: requires 1 or 2 user-defined outputs (BAC type) * On-board and laptop data logging: Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics * CAN Bus communication for Haltech dashes and expansion devices or OBDII (view live engine data and set and clear diagnostic trouble codes) * 2 injection stages for use with rotary engines * ECU comes fully enabled, with no additional charges for advanced features --- ADVANCED TUNING: * Tuning table resolution up to 32 x 16 * Limitless tuning flexibility: Tune your engine by a combination of 3-D tuning tables combined with 3-D per cylinder compensations and multiple user-definable corrections * Tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height, or any channel for ultimate flexibility. Dual mapping is a thing of the past. * Per cylinder tuning correction – 3-D * Wideband O2: Connect up to 3 channels via CAN expansion devices * Thermocouples / EGT (Exhaust Gas Temperature): Connect up to 12 channels via external CAN expansion devices * Variable cam control: Independently control up to 2 camshafts. Requires a minimum of one user-defined input and output per variable cam

Not Yet Reviewed

$929.99

BluePrint Builder Series 427/540HP Standard Edition EFI Crate Engine and 700R4 Transmission Combos

BluePrint Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork, making it easier to gain the performance you desire. These combos match a fuel injected GM small block-compatible 427 c.i.d. Pro Series engine with a 700R4 automatic transmission enabling the production of 540 hp and 535 lb.-ft. of torque with a compression ratio of 10:1. BluePrint high-strength cast iron engine block: * 4.125 in. bore * 4-bolt main * One-piece rear main seal * Drilled and tapped for clutch linkage * Mechanical fuel pump provision * Passenger side dipstick Rotating assembly: * BluePrint forged steel crankshaft * Stroke: 4.000 in. * Forged 6.00 in. connecting rods * Forged pistons * Internally balanced front and rear BluePrint aluminum cylinder heads: * 66cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * .500 raised port vs. OEM Hydraulic roller camshaft: * .577 in. intake/.577 in. exhaust valve lift * 240 intake/248 exhaust duration at .050 in. of lift * 112 degrees lobe separation angle (LSA) Ignition timing: * Initial timing 10 to 16 degrees, total timing 32 to 34 degrees 700R4 automatic transmission package: * 2,200 to 2,400 stall torque converter * Flexplate * Starter Also included: * Holley Sniper 2 EFI system * Satin aluminum intake manifold * Pro Series Ready Run distributor * EFI fuel pump kit * Thermostat and thermostat housing * Valve covers * Spark plugs and wires * Timing cover * Oil pan * Polished front accessory drive: -- Reverse rotation short water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$21,699.00

Page 1 of 2
Next