Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
23 Results Found For "end"
Showing In Stock Items. Show All 43 Items.
HP Tuners Computer Programmer Accessories
Want to maximize the performance of your current HP Tuners setup? HP Tuners offer computer programmer accessories, from USB cables to OBD-2 cables, EIO plugs, and more. These quality hardware components can be used as replacements for worn or misplaced originals, or to upgrade your existing setup.
( 17 )
$15.99
JET Stage 2 Computer Chips/Modules
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$169.46
Holley Dominator EFI Vehicle Management Systems
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$2,399.95
—
$3,499.95
DiabloSport PredatorX Tuners
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 16 )
$302.95
Bully Dog Triple Dog GT Diesel Tuners
The Bully Dog GT Diesel tuner unlocks more horsepower and torque to meet the unique demands you put on your vehicle. With shift-on-the-fly tuning for most applications, customizable gauges to track performance, and better control of defueling and regeneration, you'll be able to summon the low-end power to take on tough jobs or improve fuel economy for long highway hauls. Space for up to 10 custom tunes helps you adjust for the many ways you put your diesel to the test.
( 23 )
$399.00
Hypertech PowerStay Modules
Hypertech PowerStay modules instantly and safely disable your vehicle's auto start-stop and/or cylinder deactivation V4 mode. The modules are simple plug-ins that put an end to these modes on your vehicle, once and for all, so you can enjoy your vehicle as it should be.
( 11 )
$124.95
DiabloSport PredatorX Tuners with PCM Swap
DiabloSport's PredatorX is the ultimate mobile tuning solution, and now includes a PCM swap. When you connect PredatorX to your vehicle it will gather the info required for the PCM swap and direct you to the swap form right through the app. DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with PredatorX to give you complete tuning access, and the OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. Preloaded with power adding tunes for multiple octane levels, they also offer transmission tunes for applications where they are needed. For those seeking more than the tunes provided, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Select the tuner designed for use with your vehicle. Features and benefits: * Add horsepower and torque * No vehicle downtime * Preloaded tunes for multiple octanes * Transmission tune included * Disable MDS * Calibrate speedometer for taller tires * Set axle ratio if you've swapped gears * Disable traction control/ESP * Set target ECT for cooling fans * Disable Auto Start-Stop * Remove speed limiter * Adjust idle speed * Raise rev limiter in drive or neutral * Live data monitoring * Read/clear diagnostic trouble codes (DTCs) * Bypass harness included where applicable
( 1 )
$429.95
—
$450.95
Range Technology Auto Stop/Start Disabler Devices
Range Technology Auto Stop/Start disabler devices end the annoying engine stop and restart at lights. And they are fast and easy to setup. Simply plug the disabler into your onboard OBD-II port and it instantly begins working to eliminate the Auto Start/Stop system. Benefits and features of Range Auto Stop/Start disablers: * No special tools needed to install or remove/uninstall * Patented technology will disable Start/Stop without reprogramming your ECU * No more hesitation when restarting after stopping in traffic * Saves on costly repair bills in the future by turning off Start/Stop * Safe and reversible to use; leaves no trace--unplug it to return to factory settings
( 26 )
$255.95
Edge A-Pillar Display Mounts
Edge A-Pillar display mounts have been specifically engineered for an OEM look and fitment to place your monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup-style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and are paintable for a customizable look. Features: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual t-slot mount included * Works with all CTS3 devices including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
Not Yet Reviewed
$61.19
—
$73.49
Edge CTS3 Display Mounts
Edge cast aluminum pillar display mounts offer a more permanent and vehicle-specific mount for their CTS3 based devices. The mounts are specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. They provide a sturdy mounting location to replace Edge's standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and can be painted for a custom finish, if desired. Order the model recommended for your vehicle. Additional details: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual T-slot mount included * Works with all CTS3 devices, including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
( 4 )
$51.19
—
$83.79
ACDelco GM Genuine Parts Remanufactured Engine Control Modules
ACDelco GM Genuine Parts remanufactured engine control modules are a GM recommended replacement for your vehicle's original component. These modules regulate various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing of components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end of line tested to ensure they perform to ACDelco specifications. These GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. remanufactured engine control modules will offer the performance, durability and service life you would expect from General Motors.
( 8 )
$20.50
—
$147.99
Holley EFI Ford Coyote Ti-VCT Control Modules
Get Ford Coyote twin independent variable cam timing (Ti-VCT) control from Holley EFI. Do you have a Coyote crate engine going in your dream car? Is your weekend road race warrior powered by a Coyote junkyard engine with locked cams? Unlock the full potential of your high-revving power plant with the Holley EFI plug-and-play Coyote Ti-VCT control module! Product features: * Compatible with HP or Dominator EFI * Ti-VCT cam control down to 400 rpm * User-programmable tables enable end user to fine-tune aftermarket Ti-VCT-compatible camshafts * Commanded timing matched within 1 degree * 4 built-in diagnostic LEDs make diagnostics easy in the event of a cam or crank sensor failure * Integrated stock cam position tables eliminate tuning guesswork; optimal drivability and power right out of the box * Main harnesses come terminated with Ford TPS and IAC connectors—making it easy to convert from a DBW throttle body to a manual throttle body, if desired * Installation of an external MAP sensor is required (Holley MAP sensors recommended for naturally-aspirated applications) * Main harnesses include a power tap connector as a convenient source for power and grounds when adding additional sensors or actuators * CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high-speed data transfer and diagnostics * Pre-calibrated Ford sensor drop-downs in the Holley EFI software * Plug-and-play main harness for 2011-17 Coyote engines with stock camshafts using stock coils or Holley EFI Smart coils (Holley EFI systems main wiring harnesses)
Not Yet Reviewed
$1,399.95
Dinan Power Control Units
Dinan Power Control Units deliver more power and more features with improved reliability and drivability than ever offered before, proving performance without sacrifice is alive and well! Dinan Power Control Units (PCUs) are in-line tuning modules based off over a decade of lessons learned in the category. At their core, the plug-and-play control units install between select sensors and the ECU, adjusting these signals to achieve increased performance that the stock programming is unable to approach. What sets them apart is their integration into more than just the fundamental boost sensors, but also additional connections--inclusive of OBDII, resulting in a more capable system that does more than just increase power. Dinan PCUs are controlled by a free Bluetooth app, available for both iOS and Android, and is home to all the potent features the device offers. Equipped with five different pre-set performance levels, you can use your smart phone and PCU app to change performance levels on the fly, revert to stock, set boost by gear, as well as monitor vehicle health via logging, customizable gauges, and code reading/clearing, ensuring a seamless tuning experience that even a novice can be comfortable with. Lastly, safety and reliability have been cornerstones of the Dinan brand for generations and not only does the Dinan PCU not hinder any factory safeguards or emissions controls but incorporates its own safety features as well. Going one step beyond our own internal protections, the PCUs also grant the end user the ability to monitor up to 20 different engine parameters in real time via customizable in-app gauges for verification of worry-free operation. Those same parameters can also be logged/viewed in app (or exported to CSV) for further scrutiny if desired. Dinan Power Control Units are available with a 2-year unlimited mileage product warranty or a 4-year/50k factory matching new car warranty. Select the Dinan PCU with the preferred warranty.
Not Yet Reviewed
$716.95
—
$2,254.95
Haltech Elite 2500 ECU with Premium Universal Wire-In Harness
Haltech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.
Not Yet Reviewed
$2,409.00
Clearance
Denali Electronics DataDim Dual-Intensity Controllers
Denali Electronics DataDim dual-intensity controllers enable Denali driving lights to switch between half and full intensity with your vehicle's original high-beam switch. Simply plug this controller into the harness end included with their LED light kits to enable dual-intensity functionality. All Denali 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit. It allows the use of an external signal for reliably controlling intensity of the LED chip at the source. Order a Denali DataDim dual-intensity controller for driving light harness to set the intensity level for all your vehicle's lights with your high-beam switch. In the box: * DataDim dual-intensity controller * Dual-intensity trigger wire
( 1 )
$60.99
$39.50
HP Tuners OBD II Adapter Cables
Take advantage of your BRP vehicle's full potential with an HP Tuners OBDII adapter cable. Plug the gray insert directly into your BRP's diagnostic port and the black OBDII-end into your MPVI2, MPVI2+, or MPVI3 interface for full functionality. This OBDII adapter cable is required for tuning any supported BRP vehicles, including Can-Am and Sea-Doo.
Not Yet Reviewed
$49.99
Clearance
ACDelco Gold Remanufactured Engine Control Modules
ACDelco Gold remanufactured engine control modules are high-quality replacements ideal for many vehicles on the road today. These modules regulate various parts of your vehicle's engine by taking the inputs from sensors and additional modules, and then referencing that information back to other sensors, modules, and areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end-of-line tested to ensure they perform to factory specifications. These Gold remanufactured engine control modules will offer the same fit and performance you would expect from ACDelco.
Not Yet Reviewed
$134.99
$19.50
—
$156.99
JMS Chip BoostMAX Performance Boosters
Give your EcoBoost a ... well, boost with JMS Chip BoostMAX! These complete performance solutions plug-and-play inline using your vehicle's factory wiring connectors and harnesses to provide a huge increase in power and torque from low-end through top-end. BoostMAX units are designed to capitalize on your engine's technology through digital electronics and OEM sensors that control spark, timing, and fuel—and they're easy to install and remove. Units are housed in a proprietary sealed enclosure with wiring harness, and include the OEM connectors, a remote boost control knob, installation kit, and instructions. Order the model recommended for your vehicle. Add pep, increase power and improve fuel performance with JMS Chip BoostMAX performance boosters—a simple upgrade that can't be beat!
( 8 )
$308.99
—
$329.75
ACDelco Gold Remanufactured Body Control Modules
ACDelco Gold remanufactured body control modules are high-quality replacements for many vehicles on the road today. Remanufacturing is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new parts. In addition, damaged and obsolete parts are replaced and end-of-line tested to ensure they perform to factory specifications. These Gold remanufactured body control modules will offer the same fit and performance you expect from ACDelco.
Not Yet Reviewed
$160.99
JET Powr-Shift Computer Chips/Modules
JET Powr-Shift performance chips/modules will improve the performance of your car, truck, or SUV, adding up to 23 hp instantly with simple, plug-and-play installation. These JET Performance chips provide exclusive, full range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno tested to ensure the most possible horsepower and drivability from each application. JET Powr-Shift chips combine features of a Stage 2 performance chip with a more aggressive transmission program. Choose the one compatible with your vehicle.
( 4 )
$194.96
Holley Terminator X Max GM Gen V LT Direct Injection Kits
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,649.95
JET Stage 1 Computer Chips/Modules
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$169.46
Clearance
Cardone Remanufactured Engine Control Units
Cardone remanufactured engine control units are 100 percent computer tested to ensure full functionality. Re-solder of critical components ensures superior electrical connections, no intermittent failures, and longer product life. These engine control units receive 100 percent replacement of critical rubber wear components for longer life. On-car vehicle validation routines ensure that modules meet all form, fit, durability, and performance requirements.
( 1 )
$223.99
$154.50
