Availability
On Sale
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 98 )
$399.00
—
$699.00
$314.99
—
$539.10
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 215 )
$259.95
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 3 )
$1,495.00
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or power-adder. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 147 )
$464.95
—
$571.95
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 4 )
$80.49
Take full control of your truck's performance with HP Tuners GM E90/T93 upgrade kits! Designed for 2019-2022 GM vehicles equipped with the E90 ECM (engine control module) and T93 TCM (transmission control module), the E90/T93 ECM upgrade kits from HP Tuners can empower DIY enthusiasts and professional tuners to perform the ECM upgrade on compatible GM vehicles right at home or in the shop. The key advantage to these upgrade kits is there's no need to remove the ECM from the vehicle, which eliminates the risk of damaging delicate components during removal and reinstallation. These GM E90/T93 upgrade kits by HP Tuners also eliminate the need for complex reprogramming or relearns. Vehicle compatibility: -- The GM E90/T93 Upgrade Kit is designed for GM vehicles equipped with the E90 ECM and/or T93 TCM GM E90 ECM Support: -- 2019-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 (5.3L and 6.2L V8 – L84/L87) -- Pre-facelift models (non-Global B) GM T93 TCM Support: -- Various 2019+ GM vehicles equipped with 8-speed and 10-speed transmissions (non-Global B), including: 2020+ Chevrolet Camaro, 2019-2022 Chevrolet Silverado 1500/GMC Sierra 1500 (5.3L, 6.2L Gas, 3.0L Duramax) and 2020-2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P) What's included in the kit: -- HPTNet cable – GM E90 ECM -- HPTNet Cable – GM T93 TCM -- Upgrade box -- Upgrade cable Additional required products: -- MPVI3 device (with its supplied USB A to C cable) -- Latest version of HP Tuners VCM Suite (BETA) -- Once you're ready to write your new tune file, you must first license the vehicle Important Notes: Please refer to detailed instructions carefully so you can successfully perform the upgrade. This kit is NOT compatible with MPVI, MPVI2, or MPVI2+ devices. Only MPVI3 devices work with this kit. An E90 ECM/T93 TCM upgrade is required for tuning in VCM Editor. HP Tuners' existing E90 ECM / T93 TCM services are still available: GM T93 TCM Services and GM E90 ECM Services. No reprogramming or relearns are required using this kit. After upgrading, each GM E90 ECM must be licensed for (6) Universal Credits and each GM T93 TCM must be licensed for (4) Universal Credits. Credits are not included in this kit and must be purchased separately.
Not Yet Reviewed
$399.99
On Sale
FuelTech FT550 EFI systems were developed and created to put you in control! The FT550 ECU is an engine fuel control and monitoring system: electronic fuel injection, integrated dashboard, data acquisition, and power management system all-in-one! It uses the same FTManager software as the FT600, with the same features and functionalities--including the newest update that allows the user to update their fuel map by applying the oxygen closed loop corrections that took place from a log file. Map files of all the PowerFT ECUs are compatible with each other, meaning that you can upgrade ECUs and keep the same tune you had already. The dashboard design of the FT550 ECU systems feature an engine start button, new inclinometer gauges; and virtual LEDs for arrows, headlights and other functions. The touch screen allows editing the maps directly on the module (without the need for computer use) and seamless integration between the ECU and vehicle dashboard. More key features and benefits: * Sturdy, waterproof plastic case automotive connectors with 52 pins, USB communication and two CAN Bus ports, 14 inputs and 24 outputs that are fully configurable * Best ECU for projects that require more features, including GearController (power-shifts), built-in accelerometer (G-meter) and gyroscope; in addition to all PowerFT ECU line features such as sequential injection and ignition, O2 closed loop, active traction control, integrated BoostController, internal datalogger, progressive and PRO-Nitrous controls, odometers, electronic throttle control, inclinometer, drag racing features and more
( 3 )
$1,699.00
$1,299.00
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 29 )
$133.00
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$829.99
—
$869.99
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 3 )
$2,083.99
—
$2,149.99
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.
( 4 )
$654.95
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 2 )
$499.95
Z Automotive Jeep Wrangler JL Tazer mini programmers allow you to pull all the same great features out of your Jeep as the JL lite programmers do—and many more. They plug into your vehicle's SGW module, after which, your steering wheel buttons control all the functions. These programmers unlock features the let you enable/disable for things like a backup camera, daytime running light Dropout function, factory fog lights, factory halo lights, One-touch lane change, and more. Additional features: * Change headlight, fog light, taillight, and turn signal type from standard to LED * Enable/disable trailer tow setting * Enable/disable blind spot detection * Enable/disable change ParkSense configuration * Disable front and rear lockers for axle swaps * Disable front axle disconnect module for axle swaps
( 7 )
$329.00
Pacific Performance Engineering Standard Xcelerator tuners are specifically designed to provide better throttle response and shifting characteristics, while adding big power without the need for expensive fueling and air upgrades. They provide up to five power tuning levels of additional horsepower and torque (40 to 225 hp depending upon model). The tuners will optimize a stock engine's performance--especially those with added perks such as a free-flowing exhaust and a cold air intake system. Additional facts, features, and specs: * Speedometer corrections (for tire sizes 25 through 44.75 in. at 1/4 in. increments) * Adjustable speed limiter (from 40 to 96 mph in 1 mph increments, or directly to 200 mph) * Adjustable gear ratio from 2.73 to 5.13 * Reads and clears DTC's * Reads real-time data (for engine diagnostics) * Transmission reset and quick-learn feature * Online updates available * DPF Regeneration (LMM engine)
( 3 )
$449.99
The versatile DIYAutoTune MicroSquirt Standalone Engine Management System with 8 ft. harness is an entry-level, fully assembled ECU and universal 30 in. pigtail with varied applications—targeting powersports, single cylinder all the way up to 8 cylinders with up to two fuel and four spark outputs. Over 40 different ignition modes are supported—from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis … to unusual modes like Renix Jeep and the Suzuki Swift GTI. MicroSquirt ECU hardware features: * 2 high impedance injector outputs; max peak current 4.5 amps * 2 dedicated spark outputs * 2 general purpose on/off outputs; can be repurposed as spark outputs * 1 PWM IAC output; can be repurposed as general purpose output * 1 dedicated fuel pump output * 2 variable reluctor conditioned inputs * 1 optoisolated RPM input * 1 flex fuel or general purpose switched input * 7 analog inputs MicroSquirt ECU software features - Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables - 0.66 microsecond injector pulse width resolution - Allows blending multiple load types, including specialized mode for independent throttle bodies - Supports a wide variety of OEM cam and crank position sensors - Accelerator pump or model-based acceleration enrichment - Closed or open loop idle speed and boost control - On/off nitrous control - Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables - Staged injection - Table switching - 16 x 16 fuel tables - 12 x 12 spark tables - 2 step rev limiter (launch control) with no-lift shifting - Wideband AFR target table - Flex fuel sensor input - Real time barometric correction (external sensor required) - Sequential shift cut and air shifter control MicroSquirt with 8 ft. Harness Transmission Control Options: * MicroSquirt transmission control-free firmware allows you to use MicroSquirt with 30 in. harness to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of DIY's ECUs over canbus. * Control applications: GM 4L60E I GM 4L80E I GM 4T40E I GM 5L40E (dev) I A341E I 41TE (dev) I Ford 4R70W I Ford E40D (dev) I Subaru W4A33 and more. MicroSquirt with 8 ft. Harness CAN I/O Box Expansion: * Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug-n-play I/O extension box for MS3 or MS3Pro ECUs. It can offer a useful I/O addition: - 7 Analog inputs (0-5 V variable) - 2 Wheel speed inputs (VR or hall type) - 2 Wheel speed (hall type) or ground-switch inputs - 1 dedicated ground-switch input - 2 high current PWM/switch ground-switching outputs - 4 mid current PWM/switch ground-switching outputs - 1 low current PWM/switch 0-12 V output - Perfect for capturing and logging vehicle speed and additional sensor data
( 5 )
$388.00
Manufacturer Rebate
AutoMeter OBD-II Signal Splitters provide remote mount connections for additional devices. These units are low-profile splitter/pass-throughs, and are ideal for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation. They also provide additional, easy-to-access connection points for other onboard devices requiring access to the OBD-II data stream. Other features of AutoMeter OBD-II Signal Splitters are: * Connects to existing vehicle OBD-II port, providing two remote mount connections * 10 in. straight through leads with strain reliefs between 16-pin male and female connectors compatible with J1962 OBD-II Standards * Please note: device and vehicle compatibility may vary. Signal splitter designed to maintain OBD-II data signal integrity across two remote connection points, but does not correct for data bus termination, traffic conflicts, or compatibility of attached devices.
( 11 )
$41.99
The 2019-2022 (22.5+ refresh not supported at this time) GM gas trucks have been locked down since their introduction. Owners of these trucks have been waiting patiently for a tuning solution, and DiabloSport has delivered in a big way! The new 9225-R kit includes an industry-leading Trinity 2 on-dash tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck. Once unlocked, the Trinity 2 offers up tunes for 87, 91 and 93 octane fuels, as well as two transmission tunes to choose from. Beyond the preloaded tunes, DiabloSport offers a host of user adjustable parameters, like throttle response, speed limit, tire size, and of course, DFM disable! They've even added some new features for drivers of these newer trucks, like the ability to recall your last mode setting, or to retain your auto-start-stop setting. And it doesn't stop there with T2. The full color, 5 in. touch screen allows you to keep an eye on all your vital engine data. The on-screen gauges deliver all the info you want to see, in real time. Of course, it can also record data for playback on our DV2 software for further analyzation. T2 also enables you to set up virtual alerts, and supports the Expandable Accessory System (EAS) for adding and logging additional external sensors. The device is internet updateable, either through DiabloSport's Update Agent software or through its built in WiFi. Get power you can feel—with DiabloSport! DiabloSport Trinity 2 GM E90/T93 unlock kit features: * ECM and TCM unlock included * Unlock and tune at home * Preloaded tunes for multiple octane levels * Full-color 5 in. touch screen * Support for 5.3L and 6.2L V8 applications with 6, 8 or 10-speed transmissions * Disable Dynamic Fuel Management for full time V8 operation * Throttle Boost setting for adjustable throttle feel * Adjust speedometer for larger tires (26 – 38 in.) * Calibrate speedometer for gear change (3.42-5.13) * Remove speed limiter for increased top speed * Adjust engine rev limiter for increased RPM range (+/- 400 rpm) * Adjust engine idle speed in Park/Neutral and Drive * New 'Keep Auto Stop Start Setting' allows you to disable the system using the button on the dash—and it stays that way! * New 'Keep Drive Mode Setting' allows you to select a drive mode and it will remember that mode next time you start the truck! * Customizable gauge layouts and background images * Supports DiabloSport's Expandable Accessory System * Includes windshield mount
Not Yet Reviewed
$949.95
On Sale
FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V
Not Yet Reviewed
$339.00
$269.00
These Edge Comp modules maximize engine efficiency by monitoring the rpm, timing, turbo boost pressure, and fueling parameters. The modules use this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp modules feature five power levels with power gains ranging from 40-120 hp. Each of the five power levels has an independent 5-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low-boost smoke control, no matter what additional power modifications have been made to the engine. The Comp modules are fully adjustable on the fly, and mount inside the cab.
( 1 )
$779.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
