Availability
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 4 )
$1,495.00
Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet
( 1 )
$2,167.43
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$567.00
—
$1,202.00
These Chevrolet Performance Parts LS 376/525 hp engine controller kits are designed for controlling your GM LS 525 hp engine. They include a new controller, engine harness, mass airflow meter, mass airflow meter mounting boss, accelerator pedal assembly, two oxygen sensors, two oxygen sensor mounting bosses, and an instruction manual.
( 1 )
$2,225.39
Take control of your engine a Holley Terminator LS plug-and-play multi-port engine management system. They include all the necessary parts to control the fuel, spark, 4L60/4L80E or 4L60E/4L80E transmission, the vehicle's drive-by-wire, or some combination of those (depending on the application) on your stock or mild LS. Order the model recommended for your year/make and engine application. Holley Terminator LS plug-and-play multi-port systems include: * Terminator EFI ECU * Terminator hand-held controller with 3.5 in. full-color touch screen * Main power harness * Main engine harness * Injector harness * Other harnesses as required by the application * Oxygen sensor with fitting
( 1 )
$2,819.95
—
$4,449.95
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,210.95
—
$1,222.95
FAST EZ-EFI 2.0 LS self-tuning engine control systems are the easiest way to get your LS transplant up and running without the complex PCM flashing and harness reworking required with the stock computer. These kits feature all of the advantages of the award-winning EZ-EFI 2.0 ECU; plus, they also include the EZ-LS ignition controller and use stock or aftermarket LS injectors, sensors, and coil packs. Each FAST EZ-EFI 2.0 system utilizes an easy-to-use interface through the included touch screen hand-held and doesn't require a laptop or tuning experience. After initial setup, the hand-held can be used as a digital dash with the included suction cup window mount. The EZ-EFI 2.0 system actually tunes itself as the user drives—and because it keeps tuning, future engine upgrades are a breeze, meaning that expensive trips to the shop for simple tune changes are a thing of the past. A purpose-built, OEM-quality wiring harness is included in each kit, as well. It features a clean, mesh wrapping that dramatically improves engine aesthetics over the factory harness. FAST EZ-EFI 2.0 LS self-tuning engine control systems are compatible will all LS-based car and truck engines.
( 5 )
$1,979.95
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 90 )
$1,849.95
—
$3,399.95
Painless Performance OEM computers feature a stock calibration made for your specific vehicle while removing the VATS (vehicle anti-theft system) making them the perfect solution for your engine swap. Some tuning may be required for your specific application, but the computer will allow you to start your vehicle and get it to a local tuner. Make your engine swap easier with Painless Performance computers.
( 8 )
$199.99
These Chevrolet Performance 430 HP LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,167.43
Chevrolet Performance engine controllers are individual units for your LS crate engine. They are identical to those included in their kits. Maintain the intellect of your Gen III/IV LS or Gen V LT-powered project vehicle with the "brains" designed to work flawlessly--Chevrolet Performance engine controllers.
( 1 )
$126.99
—
$3,167.98
Get ready to "Push the Boundaries" with HP Tuners CORE standalone engine control units! Created and designed for gearheads and craftsmen who need the utmost level of customization, CORE ECUs deliver superior control over your powerplant with many features that go beyond the constraints of factory ECUs. They provide all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control. Bringing the CORE ECU to life is HP Tuners' VCM Live software, combining the diagnostics and calibration elements into a single, user-friendly interface. HP Tuners CORE ECUs are designed for all levels of LS swaps and high-performance motorsports builds. Currently CORE supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers. Drag, circuit, off-road racing; drifting, rally, or restomods, no matter what your high performance application, HP Tuners CORE ECU will provide everything you need for total control, performance, and ease of use. Order yours today. Key features: * Up to 16 injector control (fuel) and 8 coil packs (spark) * Sequential injection * Flex Fuel support * Dual throttle body capability * Two built-in Lambda controllers * Internal datalogging--up to 150 channels at 1kHz * 3 CAN bus networks (2 CAN and 1 HPT net) and ethernet connectivity * Turbo boost and anti-lag control * Single-stage On/Off and progressive nitrous control * Launch control * Map switching * A/C control, alternator control, etc.
Not Yet Reviewed
$1,999.99
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
—
$2,505.95
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$2,719.95
—
$2,969.95
FAST MAP sensors, by monitoring intake manifold vacuum, measure the amount of load being placed on the engine. They relay engine load output to the ECU, which in turn adjusts fueling for optimum performance and economy. Choose between 1-bar, 2-bar, 3-bar, and 5-bar MAP sensors.
( 10 )
$131.95
For cars with an identity crisis (they don't know if they're a street car or a race car), XFI Sportsman electronic fuel injection systems fill a hole in the middle of the FAST lineup. They're designed to satisfy the enthusiast who does spend some time racing, but also spends time cruising. These EFI engine control systems will serve to simplify the tuning process and give you the capability to control the engine with greater control and precision than currently exists. When we say simple, we mean really simple--installation is a snap, and if you've ever worked with tuning software in the past, XFI's C-Com software will be familiar to you. If not, then you can use the self-tuning option and be off to the races as you learn the capabilities of your new system. The FAST systems ship with an ECU, wiring harnesses, wideband oxygen sensor, and electronic fuel pressure kit.
( 5 )
$1,712.95
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
ICT Billet ECM mounting brackets are designed to secure your engine control module. Made from 14-gauge precision bent steel, the brackets are black powdercoated for durability and provide a stylish appearance. Includes two brackets to secure ECM to the vehicle, along with mounting hardware.
Not Yet Reviewed
$72.99
DIYAutoTune MegaSquirt MS3Pro EVO standalone engine management systems are scaled up, more capable units due to the shared technology with their big brother, MS3Pro Ultimate. EVO ECUs by AMP EFI do not have peak and hold injector drivers, but they do share some increased I/O, an onboard 4-bar MAP, barometric pressure sensor, and 5 diagnostic LEDs. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro EVO ECUs will deliver winning control. MS3Pro EVO ECUs feature configurable inputs/outputs: * 10 high-impedance injector outputs * 8 logic level spark outputs * 3 PWM outputs * 2 digital outputs * 7 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro EVO standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$1,899.99
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$2,099.99
Chevrolet Performance LS7 engine controller kits are calibrated to run your 2007-2013 LS7 crate engines. These module and harness kits are designed for easy plug-and-play installation, and are inclusive for all components needed to get your LS-family engine running. These Chevy Performance kits include: * Controller * Engine harness * Mass airflow meter and mounting boss * Accelerator pedal assembly * 2 oxygen sensors and bosses * Instruction sheet
Not Yet Reviewed
$2,189.98
Chevrolet Performance controllers are uniquely calibrated for installation in older vehicles—unlike the controllers from regular-production vehicles. That means many features required for late-model production vehicles are "turned off" because they are not required in older cars and trucks. This helps to prevent the unnecessary triggering of diagnostic trouble codes that could possibly affect performance or require additional calibration adjustments. These engine controller kits are designed exclusively for Chevrolet LS427 570 horsepower wet sump LS7 crate engines. If you have a late model Chevy, you'll want this kit! The kit includes: * Engine controller * Wiring harness * Mass airflow meter * Throttle pedal assembly * Oxygen sensors
Not Yet Reviewed
$1,889.51
Haltech's Elite 2500 ECU with Plug'n'Play harness provides the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and this plug-and-play product allows you to be up and running in just a few hours. The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, and 8-cylinder, drive-by-wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof Case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software Harness features: * An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration Notes: Please confirm your alternator connector (see the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) ignition coils and harnesses are not included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$2,629.00
An efficient powerplant begins with one of these Chevrolet Performance LS9 engine controller kits. They include all the components required—such as the ECU and harness—to get your legendary beast powered up and running according to your custom specifications. Nothing's better for your Chevy than genuine components to make your project a success. Operate your LS9 engine with a controller kit from Chevrolet Performance.
Not Yet Reviewed
$2,307.22
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
