Availability
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,149.99
—
$1,499.99
On Sale
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$1,599.95
$899.95
—
$1,599.95
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$2,349.95
—
$3,399.95
$2,113.95
—
$3,058.95
On Sale
All cylinders, all the time! Get the most out of every mile with a Range Technology AFM/DFM Disabler Device. These modules allow your V6 or V8 GM vehicle to run in full cylinder mode at all times. This patented technology is the only product that will disable AFM or DFM without reprogramming the factory ECU. You get full power delivery all the time without factory warranty concerns. Additional features: * No more shuddering or dropping cylinders * Fast and easy setup; simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM or DFM system * No tools needed; simply remove to uninstall * All-terrain power and control in any situation—bad weather, off-road, and carrying heavy loads * Safe and reversible: leaves no trace; unplug it to return to factory settings * Fits all V6 and V8 General Motors AFM/DFM vehicles, including cars, trucks, and SUVs * Device is available in multiple color options
( 218 )
$259.95
$233.95
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 4 )
$1,495.00
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$1,202.00
$567.00
—
$1,021.70
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$723.95
—
$1,098.99
$650.95
—
$943.95
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$829.99
—
$869.99
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Vance & Hines FP4 tuners deliver legendary fuel tuning and performance for your Harley-Davidson® with great features, and the ease of use you expect from Vance & Hines. Utilizing state-of-the-art, Bluetooth-enabled app-driven technology, the FP4 tuners empower you with the ability to do 100 percent of tuning right from the palm of your hand with your mobile device. Backed by industry-leading customer support, the FP4s maintain 49-state emissions compliance, thereby keeping your motorcycle factory warranty intact. Choose the Vance & Hines FP4 tuner designed for your Harley-Davidson®.
( 4 )
$459.99
On Sale
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 2 )
$499.95
$448.95
On Sale
The Edge EZX module is the next-generation inline performance module engineered for today's most powerful diesel trucks. Designed for simple, plug-and-play installation, the EZX connects directly to your factory system in minutes with no cutting or splicing required. Once installed, you'll unlock on-the-fly power level adjustments using the intuitive Edge smartphone app, giving you total control of your truck's performance right from your phone. Whether you're towing heavy loads, daily driving, or pushing your truck to the limit, the EZX is built to deliver. Enjoy instant throttle response, improved drivability, and up to 1,200 ft-lbs of torque to the tires. Engineered to be emissions safe and warranty-friendly with no trace when removed, the EZX offers safe, reliable power without compromise. NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app
( 8 )
$749.95
$499.95
—
$673.95
On Sale
These SCT X3 Power Flash programmers store up to three separate custom tunes that can increase horsepower, torque, and even fuel mileage! They feature a huge backlit LCD display for easy viewing of built-in data logging or real-time monitored vehicle data, and popular sensor data such as EGT, air/fuel ratio, and many other sources. The programmers back up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. These SCT X3 Power Flash programmers can read and clear diagnostic trouble codes. They have dual analog inputs, user-adjustable vehicle parameters, and include a USB interface cable.
( 7 )
$379.00
$341.10
Z Automotive Jeep Wrangler JL Tazer mini programmers allow you to pull all the same great features out of your Jeep as the JL lite programmers do—and many more. They plug into your vehicle's SGW module, after which, your steering wheel buttons control all the functions. These programmers unlock features the let you enable/disable for things like a backup camera, daytime running light Dropout function, factory fog lights, factory halo lights, One-touch lane change, and more. Additional features: * Change headlight, fog light, taillight, and turn signal type from standard to LED * Enable/disable trailer tow setting * Enable/disable blind spot detection * Enable/disable change ParkSense configuration * Disable front and rear lockers for axle swaps * Disable front axle disconnect module for axle swaps
( 7 )
$329.00
Unlock the hidden potential in your Mopar with Z Automotive Tazer programmers. These programmers plug into your OBD II port and allow you to enable features that exist in your vehicle from higher trim levels or packages disabled by the factory. Unlock features that will allow a backup camera, factory fog lights, daytime running lights, line lock functions, Light Show mode, and more. Specific features of Z Automotive Tazer programmers include: * Enable factory sport mode for 5-speed vehicles with 8.4 in. and 4.3 in. Uconnect screens (2012-14 Charger/300) * Enable factory sport mode for 8-speed vehicles (2012-17 Charger/300, 2015-17 Challenger) * Enable SRT performance pages on 8.4 in. Uconnect screen (2012-14 Charger/300) * Enable SRT performance timers in EVIC display (2012-18 Charger/300/Challenger) * Enable drive modes—street/sport/track/valet/custom/ECO (2015-18 Scat Pack Charger/Challenger) * Enable support of added factory paddle shifter (2012-18) * Force RWD mode for AWD cars/trucks (2012-17 Charger, 2014-17 Jeep GC SRT, 2014-17 Durango with electronic transfer case) * Manually shift gears using steering wheel cruise plus/minus buttons (2012-14, 5-speed only)
( 12 )
$249.00
On Sale
DiabloSport AFM disabler devices allow for maximum power and vehicle performance by disabling the factory Active Fuel Management (AFM) feature that drops cylinders and reduces power. They are compatible with GM vehicles built from 2005 to current that have AFM. With an easy installation--just plug them into the OBDII port under the dash and drive--you can eliminate hesitation on acceleration and the annoying exhaust buzz caused by AFM activation. You can stay in V8 mode at all times without reprogramming or re-flashing the vehicle's onboard computer (ECU).
( 58 )
$249.95
$224.95
Banks Power AutoMind 2 programmers allow your engine to work smarter by replacing the limited factory programming with one of their sophisticated tunes. You'll realize noticeably more power, performance, and mileage efficiency right away. The computer programmers are custom-engineered and configured to work with your year, make, and model. Add some serious sizzle to your gas pedal with an AutoMind 2 from Banks Power.
( 20 )
$439.00
On Sale
The Edge EZX module with Insight CTS3 is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed, helping to keep your warranty intact. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also enables you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. For the absolute best driving experience, pair EZX with the Edge Insight CTS3 to stayed informed of everything going on under the hood. EZX + Insight CTS3 kits give you everything you need to stay 'in the know,' including vehicle-specific A-pillar display mounts for factory fit and finish. Product features: * All-new EZX module and downloadable smartphone app * Insight CTS3 offers you the visibility to always know what going on under the hood * Includes vehicle-specific A-pillar mount for sleek OE styling and perfect CTS3 positioning * The EZX will allow you to control Power Levels and Engine High Idle through your steering wheel controls on-the-fly. All other features are controlled, enabled/disabled, or adjusted through the smartphone app.
( 1 )
$1,349.95
$999.95
—
$1,213.95
On Sale
Range Technology Pulsar LT modules offer complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT affords you the ability to adjust throttle response, tire size, gear ratio, TPMS, and can be used to disable Auto Start/Stop. It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Select the Range Technology Pulsar LT module designed for your vehicle. Features: * Disable Active Fuel Management and Dynamic Fuel Management (AFM/DFM) * Disable Auto Start/Stop * Calibrate speedometer for larger tires * Speed limiter adjustment * Adjust TPMS settings * Modify gear ratio * Clear DTCs * Throttle booster with on-the-fly adjustment * Manual DPF regeneration * Engine idle up * Transmission relearn Note: Features vary by vehicle model/engine.
( 1 )
$549.95
—
$699.95
$384.95
—
$628.95
Summit Bucks
ACDelco ABS control modules meet or exceed OEM part specifications to help them deliver the same fit and performance as your factory equipment. ABS modules read the data from your speed sensor and send the correct pressure to each wheel, enabling you to maintain steering control and stop quickly under most conditions. Hundreds of models are available for vehicles from the 1990s and up. Select the replacement ABS control module recommended for your application.
( 2 )
$47.99
—
$1,777.99
On Sale
SCT Livewire TS performance programmer and monitors let you tap your ride's hidden performance and excitement! SCT Livewire plus touch screens are easy to set-up, use, and navigate to quickly upgrade your boring factory-calibrated vehicle computer for a high performance driving experience. These tuner kits are available for both gas and diesel vehicles plus they include a windshield mount to keep your data at eye level. You're not like everyone else and your driving experience doesn't need to be mediocre! Power tune with SCT Livewire TS Plus performance programmer and monitors. SCT Livewire TS Plus features: * Color 4 in. touch screen display * Rear view camera input * Automatic on/off/sleep mode * Holds up to 10 custom tunes * Reads and clears DTC codes * Built-in performance calculator * High-speed data logging and monitoring * User adjustable tune options * User selectable graphics and gauge layouts * User adjustable warnings/alerts * Adjust for different size fuel injectors * Disable CMCV to prevent CEL * Remove, increase, or decrease vehicle's speed limiter * Increase or decrease idle speed * Disable traction control * Add or remove timing by rpm range * Add or remove fuel at wide open throttle * Change transmission shift pressure - automatic transmissions only * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Stores vehicle's stock file before programming * Supports and holds custom tunes * Adjust electric fan engagement temperature Custom Tune File Adjustable Options: * Increase or decrease idle speed * Remove, increase, or decrease vehicle's rpm limiter in Drive * Remove, increase, or decrease vehicle's rpm limiter in Neutral * Remove, increase, or decrease vehicle's speed limiter * Adjust electric fan engagement temperature * Add or remove fuel at wide open throttle * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Increase or decrease the wide open throttle shift points of each gear individually * Change transmission shift pressure - automatic transmissions only
( 53 )
$599.00
$539.10
On Sale
DiabloSport Predator 2 flash programmers are back on the prowl! They feature slim, sleek case designs that fit nicely in the palm of your hand--and offer users tremendous performance gains, an unprecedented collection of adjustable options, advanced data logging capabilities, and a lot more. You'll appreciate the Predator 2 full-color, button-controlled screen with improved user interface, and the programmers come loaded with everything you need right out of the box. Get ready to optimize your driving experience with DiabloSport Predator 2 flash programmers. Order the model designed for your vehicle application. Features include: * Performance programs add horsepower and economy * User-adjustable options like tire size, gears, shifting, and more * High-speed OBD-II data logging * Reads/clears diagnostic codes * USB for updates and downloads * Saves stock tune and can easily restore the vehicle back to factory settings * Supports domestic gas and diesel, cars and trucks
( 28 )
$799.95
$463.50
—
$718.95
On Sale
Superchips Pulsar XT computer programmers are innovative inline modules engineered to keep your factory PCM untouched, with no PCM swap or unlock required to add up to 20 hp/30 lb.-ft. of torque. Pulsar XT interacts with sensors under the hood and your PCM signals to enhance the drivability, power, and torque, which can all be operated from the steering wheel controls. This all-new take on performance and calibration lets you enjoy shift-on-the-fly performance gains, with calibration adjustment for larger tires, gear ratio changes, TPMS adjustments, and Auto Start/Stop disable all in one easy-to-use device. Pulsar XTs can also be used to read and clear Diagnostic Troubles Codes and are easily removed for dealer/warranty work with no traces left within the system. Features: * User-adjustable power levels via cruise control buttons * Adjustable power levels on-the-fly * Tire size: 20 in. to 49.9 in. * Gear ratio: 2.00 to 5.99 * Improves economy, towing capabilities, and performance * Performance levels 1 to 5, with incremental power gains * Power level displayed on OEM dash * Tire pressure adjust 20 to 69 psi
( 3 )
$671.95
$583.95
—
$699.95
On Sale
Range Technology Auto Stop/Start disabler devices end the annoying engine stop and restart at lights. And they are fast and easy to setup. Simply plug the disabler into your onboard OBD-II port and it instantly begins working to eliminate the Auto Start/Stop system. Benefits and features of Range Auto Stop/Start disablers: * No special tools needed to install or remove/uninstall * Patented technology will disable Start/Stop without reprogramming your ECU * No more hesitation when restarting after stopping in traffic * Saves on costly repair bills in the future by turning off Start/Stop * Safe and reversible to use; leaves no trace--unplug it to return to factory settings
( 25 )
$205.95
—
$249.95
$185.35
—
$224.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
