Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
17 Results Found For "BLACK"
Showing In Stock Items. Show All 40 Items.
Clearance
RaceChip GTS 5 Black Chip Tuning Modules
RaceChip GTS 5 Black chip tuning modules are the best of their kind for high-performance cars. State-of-the-art industry-grade hardware, up-to-the-minute software, ultra-modern technology (up to seven analog and digital channels), comprehensive safety and service package--everything a gearhead could want. Whether you are looking for an intensive driving experience on twisting cross-country roads, strong acceleration away from the lights, or raw power for the open road, RaceChip GTS 5 Black is the answer. Features: * Up to 30 percent more power and torque * Up to 20 percent increase mpg * Seven fine tuning mappings (selectable by Digital User Interface) * Motor-specific software * Warm-up timer preserves the engine * Engine Protect System+ * 2-year engine warranty (restrictions apply) * 5-year product warranty * One time re-programming included if you change your car (certain conditions apply) Hardware: * ARM Cortex-M3 processor * Up to seven analog and digital channels * Chip electronics with Nano-Protect * Pro-grade connector (FCI) * Ultra-resistant composite housing * Pro fixing system In the box: * RaceChip GTS 5 Black chip tuning module * Wiring kit * Four fixing clips * Four cable ties * User's manual
Not Yet Reviewed
$828.00
$579.50
On Sale
Holley Sniper 2 EFI Input/Output Wiring Harnesses
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 5 )
$82.49
$74.24
On Sale
Holley ECU Mounting Brackets
Holley ECU mounting brackets allow you to comfortably install either the Dominator ECU, Holley HP, Terminator X, or Terminator X-MAX under your Mustang's front passenger seat. They're designed to work with stock seats and seat tracks (modified/race seats may or may not accommodate them). You simply route all your ECU harnesses through the firewall--properly route the wires, install the unit followed by the ECU, and then reconnect your wires and go! Use your laptop to fine-tune the ECU without popping the hood and protect it from engine bay heat with Holley ECU mounting brackets. Order the brackets recommended for your application.
( 3 )
$112.95
$101.65
—
$105.95
Haltech Idle Air Control Kits
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement idle air control kits include a billet 2-port housing with 2-screw style motor. They're built to fit and function like the originals. Matching plugs and pins are included.
Not Yet Reviewed
$185.00
HP Tuners OBD II Adapter Cables
Take advantage of your BRP vehicle's full potential with an HP Tuners OBDII adapter cable. Plug the gray insert directly into your BRP's diagnostic port and the black OBDII-end into your MPVI2, MPVI2+, or MPVI3 interface for full functionality. This OBDII adapter cable is required for tuning any supported BRP vehicles, including Can-Am and Sea-Doo.
Not Yet Reviewed
$49.99
Edge CTS3 Display Mounts
Edge cast aluminum pillar display mounts offer a more permanent and vehicle-specific mount for their CTS3 based devices. The mounts are specifically engineered for an OEM look and fitment to place your CTS3 monitor in the perfect viewing position without obstructing your view of the road. They provide a sturdy mounting location to replace Edge's standard suction cup style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and can be painted for a custom finish, if desired. Order the model recommended for your vehicle. Additional details: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual T-slot mount included * Works with all CTS3 devices, including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
( 4 )
$51.19
—
$83.79
Clearance
Dorman Remanufactured Body Control Modules
The body control module monitors and controls various electronic accessories in a vehicle. Dorman remanufactured body control modules are designed to fix and correct failure-prone components on OEM designs. Easy to install, these Dorman control modules will get you back on the road.
( 1 )
$117.99
$84.50
—
$303.99
BBR Motorsports Rev Boxes
BBR Motorsports rev boxes can raise the rev-limiter of your OEM ignition, or in some applications eliminate it altogether. You'll experience a hotter advance curve for a more complete burn, resulting in crisper throttle response and improved efficiency. This compact unit simply plugs into your stock wiring harness, a direct replacement for the factory CDI ignition box.
Not Yet Reviewed
$99.95
On Sale
Holley Terminator X MAX GM 6L80/90 Transmission Kits
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$587.95
$528.95
Haltech Nexus R3 VCU with Universal Wire-In Harness Kits
Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full ECU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
Edge A-Pillar Display Mounts
Edge A-Pillar display mounts have been specifically engineered for an OEM look and fitment to place your monitor in the perfect viewing position without obstructing your view of the road. Molded and cast from aluminum, the display mounts offer a sturdy mounting location to replace our standard suction cup-style mounts. Coated in a sleek matte black finish, they offer a clean look in any interior and are paintable for a customizable look. Features: * Cast aluminum for rigidity and solid mounting * Custom molded for vehicle specific fitment * Paintable finish for complete end user customization * No drilling required, mounts using existing A-Pillar grab handle location * Locates monitor in optimum viewing position * Hardware and dual t-slot mount included * Works with all CTS3 devices including Insight, Evolution, and Juice * Also works with older CTS2 and CS2 style monitors * May work with other aftermarket mounts that use similar uni-ball construction
( 1 )
$61.19
—
$66.14
aFe Scorcher GT Modules
aFe Scorcher GT modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin on-the-fly power adjustments. The four power settings are adjustable with one button, and the LED light indicates the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher GT modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure, improving vehicle efficiency, power, and throttle response. The tuner components are housed in a black powdercoated aluminum casing—with connectors that require no modification to your factory harness; they plug directly into the stock wiring harness connectors and sensors. Order the computer module designed for your vehicle application.
( 1 )
$387.00
—
$500.00
aFe Scorcher HD Modules
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$285.00
—
$646.00
On Sale
FuelTech NanoPRO Oxygen Sensor Conditioners
FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V
Not Yet Reviewed
$349.00
$249.00
Dorman Remanufactured Transfer Case Control Modules
These Dorman remanufactured transfer case control modules are pre-programmed out of the box and install easily with plug-and-play wiring connectors. Factory transfer case control modules typically fail through corrosion under normal use; this results in the inability to shift in or out of 4WD mode. The modules are fully stress-tested for durability, so you can be sure that your 4WD won't get stuck in or out of gear next time.
( 19 )
$197.95
—
$316.95
ACDelco GM Genuine Parts Body Control Modules
ACDelco GM Genuine Parts body control modules are the right replacements for your GM vehicle's original component. When you start getting the warning signs of trouble--engine won't start, loss of power, erratic transmission operation, etc.--it may be time for a new module to communicate with the systems in your ride.
( 1 )
$112.99
Clearance
Cardone Remanufactured Body Control Modules
For the past 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for the highest quality remanufactured hard parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint OE design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. These body control modules are available for vehicles from the early 1990s and up. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * 100 percent replacement of critical rubber wear components so that you receive longer life from your Cardone unit * 100 percent computerized testing for quality and reliability * 100 percent appearance-inspected to ensure your satisfaction
Not Yet Reviewed
$87.99
$21.50
