Availability
On Sale
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$847.00
—
$1,060.00
$719.95
—
$901.00
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$141.71
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$141.71
Haltech's Elite 2500 ECU with Plug'n'Play harness provides the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and this plug-and-play product allows you to be up and running in just a few hours. The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, and 8-cylinder, drive-by-wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof Case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software Harness features: * An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration Notes: Please confirm your alternator connector (see the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) ignition coils and harnesses are not included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$2,899.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
