Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
7 Results Found For "shifter cable"
Showing In Stock Items. Show All 8 Items.
DiabloSport Gateway Bypass Cables
Designed for use with DiabloSport's modified PCM (sold separately) these replacement Gateway bypass cables are required for Tuning and 2018 and newer Dodge, Chrysler or Jeep vehicles. DiabloSport is an enthusiast-powered brand, driven by technology. They create innovative tuning solutions for late model, gas powered cars and trucks, which allow users to tune their vehicles in their driveway. DiabloSport products are designed for ease of use, while providing dyno verified power gains in a safe manner. If you are seeking more power from your ride, or better throttle response, improved shifting, or more, DiabloSport has the tuning solution for you!
Not Yet Reviewed
$65.35
DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 3 )
$869.99
Hypertech Max Energy Power Programmers
Hypertech's Max Energy power programmers extract every bit of energy possible from every molecule of fuel, increasing miles-per-gallon at part throttle and horsepower at wide-open throttle. Max Energy programmers are even Internet updateable with the included USB cable. Additional features (depending on the vehicle application) include: * Raise the top-speed limiter to match the speed rating of high performance tires * Raise the engine's rpm limiter for increased performance * Adjust individual automatic transmission shift points and shift firmness * Recalibrate speedometer and odometer for non-stock tire sizes and/or gear ratio changes * Lower the cooling fan on/off temperatures to match the thermostat rating * Read and clear diagnostic trouble codes and turn off "check engine" lights * Ability to adjust settings or go back to stock calibration at any time
( 132 )
$399.95
DIYAutoTune MegaSquirt MS3Pro Plug-and-Play Engine Management Systems
DIYAutoTune MegaSquirt MS3Pro plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements. They are offered for a variety of vehicles for off-road and race applications. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get your engine started with the first turn of the key, ready for fine tuning to match your engines exact needs. DIYAutoTune MS3Pro PNP ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real time tuning and data logging with a laptop connection * 8 GB internal data logging with built-in SD card * Supports most aftermarket wideband sensors * 16x16 fuel tables allow high resolution tuning * 16x16 ignition tables * Multiple acceleration enrichment strategies * Closed loop idle speed control * Air conditioner control * Sequential fuel injector channels with individual trim tables * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock MAF sensor * 12x12 air fuel ratio target tables for use with wide band O2 sensor for precise tuning and table trim * Multiple traction control strategies * Built-in 3-step rev limiter/launch control with flat shift and burnout rev limiter * Real time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over boost protection * Closed loop boost control (requires boost solenoid kit) * Rally-style anti-lag * Water injection control--on/off or variable * Knock sensor input with adjustable sensitivity, crank angle windowing, and more * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions like, EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MS3Pro plug-and-play ECU * Tuning cable * Tuning software and documentation on USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Registered version of TunerStudio and MegaLog viewer
Not Yet Reviewed
$1,499.99
On Sale
Edge Revolver with Insight CTS3 Programmers
The six-position Edge Revolver for Ford 7.3L Power Stroke diesels can now be controlled by the Insight CTS3 programmer! Change the power levels of your chip using the touch screen on the Insight CTS3. The new combo kits will include the Revolver chip, Insight CTS3, and the EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable performance, up to 140 hp, using Edge's Insight CTS3 display. With the EAS Revolver Cable installed, the Insight CTS3 will recognize the EAS switch, allowing you to view the new power level screen with the Up/Down adjustment buttons and display what power level you're in. This new screen allows switching between multiple power levels on-the-fly as easy as one-touch! Order the model recommended for your application. Edge Revolver with Insight CTS3 Programmer features: * Most comprehensive, state-of-the-art, multi-gauge touch screen display on the market * Plug-in performance chip to operate with your specific 7.3L box code * Shift-on-the-fly power levels with the Insight CTS3 * Full in-cab, state-of-the-art digital gauges * Up to six options for performance and other various modes * Calibrations for your specific year, make, model, and transmission * Up to 140 hp and 250 lbs.-ft. torque * Increase fuel economy, towing power, and overall performance * Built-in performance meter measures 0-60, 1/4 mile times, etc. * Clear and Read DTC codes * Easy installation
Not Yet Reviewed
$849.95
$763.95
AiM Sports MXP 1.3 Strada Data Loggers with Street Icons
The AiM MXP 1.3 Strada with Street Icons data loggers combine a high-contrast TFT display with essential road-legal indicators (turn signals, high beams, oil) and advanced data logging capabilities. They replace standard gauges, offering customizable dashboards, ECU connectivity, and configurable RGB alarms for both street and track performance. The MXP 1.3 Strada data loggers are ideal for daily driven performance cars, track-day vehicles, or for use in modernizing older instrument clusters. Key benefits of the MXP 1.3 Strada with Street Icons: * Dual functionality—the "Street Icons" allow you to wire analog inputs to simulate traditional vehicle warning lights, such as hazard lights, high beams, and turn signals, making it ideal for road-going or dual-purpose vehicles * Superior visibility—with 6-inch TFT screen offers 50 percent more display area than 5-inch screens and includes an ambient light sensor to automatically adjust brightness * Customizable alarms and shift lights—includes 5 (standard) or 6 (1.3 model) configurable RGB alarm LEDs and a 10-LED shift light array, so you can set custom colors, flashing frequencies, and accompanying text messages for each alarm * Massive ECU compatibility—can support over 2,000 industry-leading ECUs via CAN, RS232, or K-Line connections; this allows you to display dozens of channels (RPM, speed, water temperature, oil pressure, gear) with as few as two cable connections * Expandable system, while the Strada itself is a display-only unit (it does not log data natively), it can be upgraded to a full data logger by adding the AiM Strada Logger kit (sold separately); unit also supports expansions like the GPS09c module for track mapping and SmartyCam for video overlays * Camera integration—features two analog camera inputs, allowing the display to function as a rearview mirror or backup camera triggered by a button or specific event
Not Yet Reviewed
$1,499.00
Rough Country Speedometer Calibrators
Your vehicles computer is designed to track the speed based on your stock tire height. When upgrading to larger tires, there will be a discrepancy between your actual speed and the readout on your speedometer. Rough Country speedometer calibration devices are easy to use to help you quickly reprogram your vehicles speedometer to match the output of your larger tires. These plug-and-play devices connect directly to your vehicle's diagnostic link connector port and in just a few short minutes your speedometer reads true again. Plus, they not only change your in-dash readout, but they also update your vehicles ECM, ensuring accurate shift points and proper electronic stability control. Finally, you can get an affordable and accurate speedometer calibration with an easy and intuitive setup process, thanks to Rough Country. Choose the device designed for your vehicle.
Not Yet Reviewed
$39.95
—
$259.95
