Summit Racing SpeedCard - learn how to get 10% back up to $100

Summit Racing SpeedCard - learn how to get 10% back up to $100

Haul in the Savings - Shop the Truck Savings Event Today!

6 Results Found For "battery switch"

Part Groups

Results 1 - 6 of 6

Superchips Flashcal and Amp'D Throttle Booster Power Switch Kits

Superchips Flashcal and Amp'D throttle booster power switch kits pair a dynamic duo that will wake up your vehicle's laggy pedal feeling after that tire/lift upgrade. With these performance bundles, your truck or Jeep will have the most popular tire/gear calibration features along with six throttle sensitivity settings that can be switched on-the-fly. Features and benefits of the Flashcal and Amp'D throttle booster kits: * Corrects speedometer for tire upgrades between 26 in. and 42 in. (vary by application) * Speedometer recalibration for gear/axle swaps (vary by application) * Reads and clears diagnostics trouble codes * Digital battery voltage display * Real-time data logging * Real-time data monitoring * TPMS options (vary by application) * Improves throttle sensitivity * Faster acceleration from a stop, and throughout the rpm band * Quicker spool-up * Push button control to activate six throttle sensitivity levels * The six modes: Stock, low—50 percent, medium—75 percent, high—100 percent, valet, and 400 percent "Wow Mode"

Not Yet Reviewed

$616.95

$699.95

Dakota Digital Retained Accessory Modules

Dakota Digital retained accessory modules have the ability to control accessories simply by opening the door. They feature automatic headlights, an automatic dome light, battery monitoring, an override switch, and a remote door lock trigger input. The Dakota Digital retained accessory modules have four dip switches and an adjustment pot to allow the user to customize them.

4.6 out of 5 stars ( 5 )

$247.00

Holley Terminator X MAX GM 6L80/90 Transmission Kits

Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.

Not Yet Reviewed

$573.95

Superchips Pulsar XT Ford Bronco Computer Programmers

Superchips Pulsar XT Ford Bronco computer programmers control the following features: * Amber DRLs: This allows you to use the amber lights as your daytime running lights and turn signals. Stock, they are used only as turn signals. NOTE: DRLs will not be amber when your high beams or low beams are on. * Auto Start Stop Disable: Disables or enables the auto start/stop system on vehicles already equipped with it. * Battery Management System: Disables BMS. This will allow the battery to charge above the preset threshold. The vehicle will no longer warn you if your battery is getting low due to your headlights or radio being on. The side effect of disabling this system is the auto start stop system will also be disabled. * Dark Mode: Interior lights will remain off when the doors are opened. * Daytime Running Lights: Enable/disable DRLs * DTC Read/Clear: Feature will scan vehicle for Diagnostic Trouble Codes and report any found. Clear command will delete any present codes in the system * Emissions Readiness: This feature will check the current status of the vehicle's emissions readiness monitors. * Fog Lights with High Beams: Enables fog lights to stay on with high beams. * Headlamp Switch: The stock setting is for the vehicle to put the headlamp switch to "auto" when the vehicle is turned on. This will allow the vehicle to remember the previous setting after a key cycle. * Honk Warning: No longer honks if you leave the vehicle with the key if the engine is running. * Remote Start Duration: Change duration to 0, 5, 10, or 15 minutes. * Tire Size: Allows speedometer and odometer calibration for tire size changes up to 37 in. tall (36.25 in. measured). For most accurate results, measure tire height mounted on vehicle with a tape measure and input that reading, not what is printed on tire sidewall. * TPMS Adjust: Allows factory TPMS warning threshold to be adjusted between 1-99 psi. Use this feature if you want to run lower than factory tire pressure * TPMS Disable: This feature will completely turn off the TPMS system. Use when running below 25 psi or if tires are no longer equipped with TPMS sensors.

3.0 out of 5 stars ( 1 )

$671.95

Dinan Throttle Boosters

Dinan offers throttle boosters for a wide range of vehicles, including many BMW, Toyota, and Mini Cooper models from 2001 and up. Throttle response/sensitivity preferences vary wildly from one person to another. While others may think the throttle curves integrated into their software offerings are perfect, you may not feel the same. Don't settle—take matters into your own hands and design your own custom throttle curve catered to your personal needs. These boosters are equipped with five preset throttle curves for easy adjustment from the wireless control switch (or app), so you can quickly select a throttle mapping option that works for you. If those aren't ideal though, you also have thousands of potential curves you can build yourself in the associated iOS/Android app. Save up to three of those customizable curves directly onto the device—and throttle options for numerous and varied situations are at your fingertips instantly. Best of all, the Dinan throttle booster installs in minutes and is fully reversible. A richer, more enjoyable driving experience has never been easier to attain! Product details: * Wireless control switch with associated mobile apps for Android/iOS * Fully user-customizable throttle curves * Increases accelerator pedal response over stock * Reduces dead pedal feeling (acceleration lag) * Works with stock or modified vehicles * 5 preset throttle curves and 3 customizable throttle map curves * Connects to the throttle harness, leaving your OBDII port free * Quick and easy installation

Not Yet Reviewed

$269.95

On Sale

Bully Dog Heavy-Duty WatchDog Diesel Tuners

Bully Dog heavy-duty WatchDog diesel tuners monitor multiple parameters to improve engine performance tracking. They also allow you to read/clear diagnostic trouble codes (DTCs), and accurately set the limit of your vehicle's cruise control. This can save considerable time and money when crossing borders by switching the maximum speed setting before the engine automatically limits power (not available for PACCAR MX 13 engines). They also feature Driving Coach mode to help you achieve the best fuel economy possible. Bully Dog heavy-duty WatchDog diesel tuners help develop confidence, fuel-saving driving habits, and provide extra monitoring of truck functions. Features and specs: * Set vehicle warnings to alarm if parameters are exceeded for coolant temperature, oil temperature, boost, and speed * Free internet updates help assure that you always have the latest files for your vehicle * Adjustable options vary for each vehicle and may not be available on all vehicles

Not Yet Reviewed

$449.00


$404.10

  • 1
  • Page 1 of 1

Modal Header