Filters
Mopar Replacement offers engine control modules for a wide range of applications, including many Jeep, Dodge, Chrysler, and Ram vehicles from the 1950s and up. These new or remanufactured replacements are among the best and longest-lasting electrical system parts available. They will deliver the fit and performance you expect. Select the ECM recommended for your Mopar ride.
Not Yet Reviewed
$2,479.99
On Sale
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$2,999.95
—
$3,499.95
$2,698.95
—
$3,148.95
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 88 )
$2,999.95
—
$3,249.95
$2,698.95
—
$2,923.95
Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors
Not Yet Reviewed
$2,136.99
Take the complexity and mystery out of wiring your late model, 2018-2023 5.0L Mustang Coyote engine with the Ford Performance Coyote 5.0L control packs! These engine management systems are designed to run Ford Performance 5.0L Mustang Coyote engines. 2018-2023 Coyote 5.0L control packs features: * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal which eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM with Ford Performance calibration requires return type fuel system, will not work with returnless fuel system * Supercharged versions, modified engines, and modified applications require custom calibration Note: Not for use with 2018+ F-150 Engines. Installation of this PCM in a 2018+ Mustang GT will result in a no-start condition.
Not Yet Reviewed
$2,324.99
Looking to add a Ford Performance Parts crate engine to your custom built vehicle? Take the complexity and mystery out of wiring your new build with Ford Performance Parts crate engine control packs! Features include: * Unique controls pack harnesses to replace stock body harnesses; designed for custom-built vehicles * OBD-II diagnostic ports to assist in vehicle calibration uploads and diagnosis of problems * PCMs with Ford Performance Parts performance calibration (custom calibration required on some engines and for aftermarket intake systems) * Electronic throttle control accelerator pedals, eliminating throttle cable routing problems * Power distribution modules * Requires return-type fuel system, will not work with returnless fuel system
( 1 )
$2,256.99
Ford Performance Parts 7.3L gas engine control packs include components and harness to install a 2020 to present Super Duty 7.3L gas engine with a 10R140 automatic transmission in a vehicle. The unique control pack harnesses replace the production body harness designed for custom vehicle builds. These kits require use of a conventional return-type fuel system. Note: Installation of PCM in a production vehicle will result in a "no start" situation.
Not Yet Reviewed
$2,218.99
—
$2,309.99
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$2,854.95
—
$3,765.52
On Sale
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$2,265.95
$2,039.36
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 92 )
$2,499.95
$2,248.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
