Availability
Showing In Stock Items. Show All 21 Items.
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 92 )
$1,449.95
—
$1,499.95
$1,303.95
—
$1,348.95
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,849.95
$1,663.95
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,049.95
—
$3,249.95
On Sale
Holley ECU mounting brackets allow you to comfortably install either the Dominator ECU, Holley HP, Terminator X, or Terminator X-MAX under your Mustang's front passenger seat. They're designed to work with stock seats and seat tracks (modified/race seats may or may not accommodate them). You simply route all your ECU harnesses through the firewall--properly route the wires, install the unit followed by the ECU, and then reconnect your wires and go! Use your laptop to fine-tune the ECU without popping the hood and protect it from engine bay heat with Holley ECU mounting brackets. Order the brackets recommended for your application.
( 3 )
$110.95
$99.85
—
$103.95
Clearance
Say goodbye to throttle delay in your gas pedal response with the Pedal Commander throttle response boosters! By amplifying the signal being sent from the sensor on your gas pedal to the vehicle's ECU (computer), the throttle response controller removes response delays on any vehicle with an electronic gas pedal. This cutting-edge device can make your acceleration smoother and more responsive, allowing you to navigate traffic more easily and pass other vehicles on the road with greater ease. Pedal Commander is the world's most advanced throttle controller that allows your engine to respond faster and gives you the acceleration you want when you want it. Yes! Pedal Commander is a safe performance upgrade that only gives you the performance reserved by the vehicle manufacturer. It will only be switched on when you really need the power and will not push your vehicle beyond its original safety measures. It's no wonder automotive experts have given their stamp of approval to Pedal Commander. It takes driving performance to exhilarating new heights! Features and benefits: * Compact device connects seamlessly to your car's gas pedal for effortless installation * Pedal Commander system eliminates the delay from your electronic gas pedal, allowing your car to accelerate faster, giving your vehicle a night and day difference in performance * Pedal Commander doesn't add any horsepower, but it does let you use the existing horsepower of your engine by allowing you to access it quicker with the amplified signal * Adjustable settings—equipped with 4 different modes: Eco, City, Sport, and Sport + (each mode has additional adjustable settings to fine-tune to your liking, making this a must-have accessory for your car) * Pedal Commander's ECO Mode can help increase your car's MPG and save you up to 20 percent in fuel economy * Take control of your drive—enjoy a more responsive and personalized journey—this high-tech throttle response controller unleashes instant and pinpoint throttle response, unlocking the true potential of your vehicle * Pedal Commander is a simple plug-and-play system that installs quickly and is now Bluetooth compatible so you can control the unit using the free downloadable Pedal Commander app * Pedal Commander throttle controller complements any other mods and upgrades like tuners, programmers, performance chips, cold air intakes, performance filters, or aftermarket add-ons—it only intercepts the electronic signal and uniquely remaps the throttle curve, so its beauty lies in its simplicity * Pedal Commander will not void the warranty on your car or leave any trace behind on your ECU
( 1 )
$299.99
$209.50
Motorcyclists, connect your Daytona Twin Tec controllers to your laptop with these special USB interface cables. They include all required adapters for ignition and fuel injection systems. These cables allow you to easily interface with all Dayton Twin Tec engine controls.
Not Yet Reviewed
$101.95
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 109 )
$141.71
Hypertech Street Runner Power Chips replace your stock PROM, which holds the settings for fuel flow and spark advance. This is a Stage 1 chip that improves the spark and fuel curves for better performance. It provides max power at wide-open throttle but does not affect the idle or part-throttle settings. This means your mileage and emissions aren't affected! The Street Runner Power Chip is designed for use on a stock vehicle using premium pump gas (91 Octane or better). Wake up your ride with a Hypertech Street Runner Power Chip!
( 40 )
$171.99
Clearance
Cardone remanufactured engine control units are 100 percent computer tested to ensure full functionality. Re-solder of critical components ensures superior electrical connections, no intermittent failures, and longer product life. These engine control units receive 100 percent replacement of critical rubber wear components for longer life. On-car vehicle validation routines ensure that modules meet all form, fit, durability, and performance requirements.
Not Yet Reviewed
$220.99
$187.50
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 97 )
$141.71
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
