Availability
Showing In Stock Items. Show All 10 Items.
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$869.99
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$849.95
—
$1,049.95
$763.95
—
$943.95
Banks Power Derringer iDash 1.8 DataMonster tuner systems are designed to be the smartest and safest way to add hp/torque to your diesel-powered vehicle. The microprocessor-based electronics safely optimize the same data input calibrations as your engine's ECU—and they do so in real time via an inline sensor connection and the OBDII port; no other competitor does that! Derringer tuners are equipped with a special coolant temperature watchdog that will disengage extra power when the engine is too cold/hot. They will also auto-adjust power when bad fuel starts to cause knock. Don't get stuck in "limp home" mode with other tuner systems; run with a Banks Power Derringer iDash 1.8 DataMonster tuner system. Features, items, and specs may include: * DataMonster displays up to eight parameters (per gauge) and can log up to 100 at a time * Performance logs and custom alerts available * Simple plug-and-play installation (easy removal for dealer service) * Works with cruise control engaged * Multiple power levels with on-the-fly level changing (with switch) * ActiveSafety (on select models) protects engine/powertrain * Easily concealable compact housing for the electronics * Warranty friendly—no reflash; no ECU traces * Expandable with other Banks Bus products * Value-priced, and loaded with many more great features
( 1 )
$889.00
Install a Tesla Sport Large Drive Unit (LDU) in any vehicle—and achieve complete control with AEM EV's Sport LDU Inverter Control Board (P/N 30-8410) and an AEM VCU! This system provides full control of the LDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. The Tesla LDU currently comes in two versions, Base and Sport. AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's Sport LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. NOTE: The Inverter Control Board must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla Sport LDU. This system is designed for conversion and motorsports vehicles with Tesla Sport LDU swaps. It will not control a Tesla Sport LDU in a Tesla OE chassis.
Not Yet Reviewed
$1,049.95
On Sale
COBB Tuning Porsche Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your sports car. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. The Accessport V3s will be the last engine management solution you'll ever need. Programmers are also available with PDK flashing, and will allow you to tune both the engine and transmission control units in your supported Porsche. Order the unit designed for your year, model, and engine application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * COBB tuning is included, with enough space for 100 calibrations * In-vehicle mount with on/off switch * Interchangeable faceplates
( 1 )
$1,160.00
$986.00
On Sale
COBB Tuning Nissan Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your GT-R. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps—or use custom mapping for any modification level. The Accessport V3s will be the last engine management solution you'll ever need. They are also available with TCM flashing. Order the programmer designed for your year/submodel application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * In vehicle mount with on/off switch * Faster, easier to use * Interchangeable faceplates
Not Yet Reviewed
$1,035.00
$879.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
