Computers, Chips & Programmers Ignitions & Electrical - shifter KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

DIYAutoTune MegaSquirt Gen 2 Plug-and-Play Engine Management Systems

DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting

4.67 out of 5 stars ( 3 )

$869.99

Ford Performance Parts 2019-20 Ranger Power Packs

The Ford Performance calibration for 2019-20 Ranger Ecoboost is a 50-state legal calibration that increases power and improves driveability throughout the RPM range. This kit is Ford Performance-engineered and dyno-tested and improves driveability and throttle response throughout RPM range and features an optimized shift schedule. You can expect a horsepower gain of 45 hp @ 4,500 rpm and torque gain of 60 lbs.-ft. @ 2,500 rpm. USA and Canadian vehicles come with a Ford Performance 3-year or 36,000 mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician. Tire size configurable up to 265/70/17, as recommended with the M-18000-R Ranger Off-Road Suspension Leveling Kit. This calibration is only compatible with premium fuel. Power Pack also includes: * Ford Performance Pro Cal 4 calibration delivery tool M-12655-F * Ford Performance high-flow K&N air filter

4.75 out of 5 stars ( 4 )

$772.99

On Sale

COBB Tuning Ford Accessport V3 Programmers

COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group

4.29 out of 5 stars ( 7 )

$770.00

Edelbrock TC Transmission Controllers

Edelbrock TC transmission controllers are offered as a standalone system to work with Pro Flo 4, most aftermarket fuel injection systems and carbureted applications utilizing a TPS sensor. Features: * Transmission control over shift points, firmness, speed, torque converter lock up, shift table, speedometer calibration and line pressure * Edelbrock TC Tuner calibration app (available for both Android and Apple devices) and optional 7 in. touchscreen Bluetooth tablet for setup, adjustment and visual display * Easy install with compact housing and clean-look wiring harness * Includes base calibrations for a plug-and-play setup * Compatible with carbureted applications utilizing a standalone throttle position sensor * CAN bus communication for functionality with all Pro-Flo 4 systems and most aftermarket EFI systems * Also, allows you to change the final drive ratio, tire diameter, and transfer case ratio

2.5 out of 5 stars ( 4 )

$881.95

DiabloSport Predator 2 with ECM Unlock Programmers

Unlock and tune your GM L8T-powered truck at home with DiabloSport Predator 2 kits. They provide their industry exclusive locksmith device and ECM harness with the popular Predator 2 handheld device, giving you the ability to tune without removing the ECM. Once unlocked, the provided tunes can add big power to your 6.6L gas truck, while improving throttle response, shifting, and more. Tunes for 87, 91, and 93 octane fuel are provided, as well as tunes for the 6-speed transmissions. DiabloSport Predator 2 with ECM unlock kits also provide adjustments like throttle boost, speed limiter, and tire size to name a few. Features: * 28 RWHP/50 RWTQ over stock on 93 octane fuel * Correct speedometer for tire size * Set final drive ratio * Adjust rev limiter * Set idle rpm in Drive/Neutral * Remove speed limiter * Adjust throttle sensitivity * Recall last mode setting * Front/rear TPMS threshold adjustment * Transmission adaptive relearn * Crank position sensor relearn * Control intake filter monitor system

Not Yet Reviewed

$767.95

On Sale

Edge EvoHT2 Programmers

The EvoHT2 is a premium hand-held performance tuner from Edge Products. The new handheld tuner was designed specifically to give you the most power at the best price, with industry-leading service and quality that comes standard with every Edge product. Now with a color screen, upgraded processor, and numerous new features, you literally hold the power to unlock the hidden potential of your truck or SUV's power and fuel economy in the palm of your hand! Edge EvoHT2 features: * Fuel economy and towing capability improvements * Installs in minutes with no tools required * Speedometer calibration for axle gear and tire size changes * Advanced tuning selections from rev limits to shift points * Monitor engine and transmission parameters * Read and clear diagnostic trouble codes * Results and feature set may vary based on vehicle make, model and aftermarket upgrades on the vehicle. Read all instructions before installation and/or operation of this product.

3.25 out of 5 stars ( 4 )

$1,024.95

$921.95

On Sale

Edge Revolver with Insight CTS3 Programmers

The six-position Edge Revolver for Ford 7.3L Power Stroke diesels can now be controlled by the Insight CTS3 programmer! Change the power levels of your chip using the touch screen on the Insight CTS3. The new combo kits will include the Revolver chip, Insight CTS3, and the EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable performance, up to 140 hp, using Edge's Insight CTS3 display. With the EAS Revolver Cable installed, the Insight CTS3 will recognize the EAS switch, allowing you to view the new power level screen with the Up/Down adjustment buttons and display what power level you're in. This new screen allows switching between multiple power levels on-the-fly as easy as one-touch! Order the model recommended for your application. Edge Revolver with Insight CTS3 Programmer features: * Most comprehensive, state-of-the-art, multi-gauge touch screen display on the market * Plug-in performance chip to operate with your specific 7.3L box code * Shift-on-the-fly power levels with the Insight CTS3 * Full in-cab, state-of-the-art digital gauges * Up to six options for performance and other various modes * Calibrations for your specific year, make, model, and transmission * Up to 140 hp and 250 lbs.-ft. torque * Increase fuel economy, towing power, and overall performance * Built-in performance meter measures 0-60, 1/4 mile times, etc. * Clear and Read DTC codes * Easy installation

Not Yet Reviewed

$849.95

$763.95

Dorman Remanufactured Power Modules

Dorman remanufactured power modules combine the fuse block functions and the front control module. These totally integrated modules are fully remanufactured and vehicle simulator-tested for quality assurance. There is no programming required and the installation is an easy plug and play. Count on Dorman remanufactured power modules to keep you on the road.

4.56 out of 5 stars ( 36 )

$877.95

8 Results Found For "shifter"