Availability
Showing In Stock Items. Show All 33 Items.
On Sale
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$573.95
$515.95
Ford Performance Parts offers performance calibration kits for 2018-23 Mustang 2.3L EcoBoost cars with manual or automatic transmissions (not for use with 2020-23 2.3 HO). The programmers enable horsepower and torque gains throughout the powerband—35 hp peak gain at 2,900 rpm, and 76 lbs.-ft. torque peak gain at 2,600 rpm. Additional product details: * Exclusive Ford Performance warranty when dealer installed * 50 state legal with CARB EO (D-752-17) * Automatic calibrations feature optimized performance shift schedule * Powertrain calibrations are developed and supported for U.S. and Canadian vehicles * Premium (91 octane or higher) fuel only * Horsepower and torque gains will not be optimized until fuel octane is learned Kit includes: * Pro Cal 4 calibration delivery tool * Ford Performance high-flow performance air filter * Calibration voucher
( 2 )
$735.99
Superchips Flashcal and Amp'D throttle booster power switch kits pair a dynamic duo that will wake up your vehicle's laggy pedal feeling after that tire/lift upgrade. With these performance bundles, your truck or Jeep will have the most popular tire/gear calibration features along with six throttle sensitivity settings that can be switched on-the-fly. Features and benefits of the Flashcal and Amp'D throttle booster kits: * Corrects speedometer for tire upgrades between 26 in. and 42 in. (vary by application) * Speedometer recalibration for gear/axle swaps (vary by application) * Reads and clears diagnostics trouble codes * Digital battery voltage display * Real-time data logging * Real-time data monitoring * TPMS options (vary by application) * Improves throttle sensitivity * Faster acceleration from a stop, and throughout the rpm band * Quicker spool-up * Push button control to activate six throttle sensitivity levels * The six modes: Stock, low—50 percent, medium—75 percent, high—100 percent, valet, and 400 percent "Wow Mode"
Not Yet Reviewed
$616.95
—
$699.95
On Sale
The much-anticipated Superchips Flashpaq tuner for 2019-22 Silverado and Sierra is finally here, with revolutionary in-cab ECM/TCM unlock! Available for 5.3L and 6.2L applications, Flashpaq tuning offers more horsepower and can unlock/flash right from your driveway. The all-new GM Flashpaq performance programmer (P/N 2849-F) comes pre-loaded with tunes developed specifically for daily driving, towing, and performance enthusiasts. The Mileage XS, Tow, 87 Octane, 91 Octane, and 93 Octane tunes offer incredible torque gains throughout the RPM range with the improved drivability you've come to expect from Superchips. This all-new process completely changes everything you once knew about tuning your GM 1500 truck and will lead our industry into the future with even more capabilities, saving you time and money when it comes time to modify your truck. Enable the 'Remember Last Setting' feature that allows your truck to remember your Start Stop and Drive Mode settings every time you start your truck. Superchips can also disable your AFM/DFM systems to maintain V8 mode all the time. Calibrate your speedometer for larger tires or gear ratio changes. Adjust your TPMS settings, even fine-tune your throttle sensitivity with the built-in throttle booster feature. **Device can unlock and tune only one vehicle. Once the ECM is unlocked and flashed, the flash can be returned to factory settings, but the Unlock process cannot be reversed. If VIN lock and ECM Unlock has been completed, device is non-returnable. Product features and capabilities: * Includes ECM and TCM Unlock tool * Performance tuning for economy, towing, daily driving, and extreme tuning * Speedometer correction for changes in tire size and gear ratio * Active/Dynamic Fuel Management control * Remember Last Setting for Auto Start/Stop * Remember Last Setting for Drive modes * Adjustable throttle booster settings * Adjustable TPMS settings 1-90 psi * Adjust speed and rev limiters * Adjust Idle RPM in Park, Neutral and Drive * Read and clear diagnostic trouble codes * Shave .5-seconds off 0-60 times * Carries power curve higher into RPM range * Testing showed +4 mph in 1/4-mile times * High-definition, 2.8 in. color screen * Internet updateable with all-new update software via USB * Supports 5.3L and 6.2L engines along with 6, 8, and 10-speed transmissions
Not Yet Reviewed
$749.95
$673.95
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
( 2 )
$599.95
—
$699.93
On Sale
Superchips Pulsar XT computer programmers are innovative inline modules engineered to keep your factory PCM untouched, with no PCM swap or unlock required to add up to 20 hp/30 lb.-ft. of torque. Pulsar XT interacts with sensors under the hood and your PCM signals to enhance the drivability, power, and torque, which can all be operated from the steering wheel controls. This all-new take on performance and calibration lets you enjoy shift-on-the-fly performance gains, with calibration adjustment for larger tires, gear ratio changes, TPMS adjustments, and Auto Start/Stop disable all in one easy-to-use device. Pulsar XTs can also be used to read and clear Diagnostic Troubles Codes and are easily removed for dealer/warranty work with no traces left within the system. Features: * User-adjustable power levels via cruise control buttons * Adjustable power levels on-the-fly * Tire size: 20 in. to 49.9 in. * Gear ratio: 2.00 to 5.99 * Improves economy, towing capabilities, and performance * Performance levels 1 to 5, with incremental power gains * Power level displayed on OEM dash * Tire pressure adjust 20 to 69 psi
( 3 )
$671.95
$603.95
Clearance
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$799.95
—
$1,098.99
$652.50
—
$718.95
On Sale
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$847.00
$719.95
On Sale
SCT Livewire TS performance programmer and monitors let you tap your ride's hidden performance and excitement! SCT Livewire plus touch screens are easy to set-up, use, and navigate to quickly upgrade your boring factory-calibrated vehicle computer for a high performance driving experience. These tuner kits are available for both gas and diesel vehicles plus they include a windshield mount to keep your data at eye level. You're not like everyone else and your driving experience doesn't need to be mediocre! Power tune with SCT Livewire TS Plus performance programmer and monitors. SCT Livewire TS Plus features: * Color 4 in. touch screen display * Rear view camera input * Automatic on/off/sleep mode * Holds up to 10 custom tunes * Reads and clears DTC codes * Built-in performance calculator * High-speed data logging and monitoring * User adjustable tune options * User selectable graphics and gauge layouts * User adjustable warnings/alerts * Adjust for different size fuel injectors * Disable CMCV to prevent CEL * Remove, increase, or decrease vehicle's speed limiter * Increase or decrease idle speed * Disable traction control * Add or remove timing by rpm range * Add or remove fuel at wide open throttle * Change transmission shift pressure - automatic transmissions only * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Stores vehicle's stock file before programming * Supports and holds custom tunes * Adjust electric fan engagement temperature Custom Tune File Adjustable Options: * Increase or decrease idle speed * Remove, increase, or decrease vehicle's rpm limiter in Drive * Remove, increase, or decrease vehicle's rpm limiter in Neutral * Remove, increase, or decrease vehicle's speed limiter * Adjust electric fan engagement temperature * Add or remove fuel at wide open throttle * Set gear ratio to correct shift patterns and vehicle's speedometer * Set tire size to correct shift patterns and vehicle's speedometer * Increase or decrease the wide open throttle shift points of each gear individually * Change transmission shift pressure - automatic transmissions only
( 53 )
$599.00
$539.10
For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.
( 4 )
$654.95
On Sale
The Edge EZX module is the next-generation inline performance module engineered for today's most powerful diesel trucks. Designed for simple, plug-and-play installation, the EZX connects directly to your factory system in minutes with no cutting or splicing required. Once installed, you'll unlock on-the-fly power level adjustments using the intuitive Edge smartphone app, giving you total control of your truck's performance right from your phone. Whether you're towing heavy loads, daily driving, or pushing your truck to the limit, the EZX is built to deliver. Enjoy instant throttle response, improved drivability, and up to 1,200 ft-lbs of torque to the tires. Engineered to be emissions safe and warranty-friendly with no trace when removed, the EZX offers safe, reliable power without compromise. NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app
( 8 )
$649.95
—
$749.95
$529.95
—
$673.95
Chevrolet Performance engine controllers are individual units for your LS crate engine. They are identical to those included in their kits. Maintain the intellect of your Gen III/IV LS or Gen V LT-powered project vehicle with the "brains" designed to work flawlessly--Chevrolet Performance engine controllers.
( 1 )
$740.79
Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$725.99
On Sale
DiabloSport inTune i3 Platinum PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They, too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or more. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 2 )
$699.95
—
$799.95
$628.95
—
$718.95
On Sale
Dinantronics X kits are designed to extract maximum power out of a completely stock vehicle and those with basic bolt-on modifications without having to alter the factory engine programming. Dinan Dinantronics X Performance tuners are Bluetooth smart and offer convenient access to the adjustment of power levels directly from the palm of your hand. Advancing beyond their predecessors, X tuners connect to additional inputs and/or have a more refined tuning strategy, yielding more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash, Dinan's Dinantronics X units are perfect alternatives to satisfy the craving for "more". Dinan Dinantronics X Performance tuners will take your engine's performance to levels that stock programming cannot, and they do it without affecting long term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Whichever level of engine tuning is ultimately chosen you can be sure you will be pleased by the result. Features and benefits: * Bluetooth smart (Android and iOS Compatible) * App download/pairing process detailed within the installation instructions * Seven power levels and a bypass setting to choose from * Smooth and predictable power delivery * On-board diagnostics and factory safeguards maintained * Unaffected by dealer factory updates * Plug-and-play installation * 14-day satisfaction guarantee * 1-year limited warranty
Not Yet Reviewed
$649.95
$583.95
—
$649.95
Unlock and tune your GM L8T-powered truck at home with DiabloSport Predator 2 kits. They provide their industry exclusive locksmith device and ECM harness with the popular Predator 2 handheld device, giving you the ability to tune without removing the ECM. Once unlocked, the provided tunes can add big power to your 6.6L gas truck, while improving throttle response, shifting, and more. Tunes for 87, 91, and 93 octane fuel are provided, as well as tunes for the 6-speed transmissions. DiabloSport Predator 2 with ECM unlock kits also provide adjustments like throttle boost, speed limiter, and tire size to name a few. Features: * 28 RWHP/50 RWTQ over stock on 93 octane fuel * Correct speedometer for tire size * Set final drive ratio * Adjust rev limiter * Set idle rpm in Drive/Neutral * Remove speed limiter * Adjust throttle sensitivity * Recall last mode setting * Front/rear TPMS threshold adjustment * Transmission adaptive relearn * Crank position sensor relearn * Control intake filter monitor system
Not Yet Reviewed
$749.95
On Sale
The six-position Edge Revolver for Ford 7.3L Power Stroke diesels can now be controlled by the Insight CTS3 programmer! Change the power levels of your chip using the touch screen on the Insight CTS3. The new combo kits will include the Revolver chip, Insight CTS3, and the EAS Revolver cable that allows the Insight to connect to the chip. The six-position chip offers adjustable performance, up to 140 hp, using Edge's Insight CTS3 display. With the EAS Revolver Cable installed, the Insight CTS3 will recognize the EAS switch, allowing you to view the new power level screen with the Up/Down adjustment buttons and display what power level you're in. This new screen allows switching between multiple power levels on-the-fly as easy as one-touch! Order the model recommended for your application. Edge Revolver with Insight CTS3 Programmer features: * Most comprehensive, state-of-the-art, multi-gauge touch screen display on the market * Plug-in performance chip to operate with your specific 7.3L box code * Shift-on-the-fly power levels with the Insight CTS3 * Full in-cab, state-of-the-art digital gauges * Up to six options for performance and other various modes * Calibrations for your specific year, make, model, and transmission * Up to 140 hp and 250 lbs.-ft. torque * Increase fuel economy, towing power, and overall performance * Built-in performance meter measures 0-60, 1/4 mile times, etc. * Clear and Read DTC codes * Easy installation
Not Yet Reviewed
$829.95
$745.95
RaceChip GTS 5 tuning module is the premium chip offering phenomenal performance and quality. State-of-the-art industry-grade hardware, engine-specific mappings, plus a comprehensive service package come together to bring you a driving experience you will love with up to 30 percent more power and torque, and the ability to increase your car's mpg by up to 20 percent. RaceChip's mappings allow you to fine tune the GTS 5 modules to match your engine's performance and characteristics perfectly. Features: * Seven fine tuning mappings (selectable by Digital User Interface) * Motor-specific software * Engine Protect System+ * 5-year product warranty * One time re-programming included if you change your car (certain conditions apply) Hardware: * ARM Cortex-M3 processor * Up to seven analog and digital channels * Chip electronics with Nano-Protect * Pro-grade connector (FCI) * Ultra-resistant composite housing * Pro fixing system In the box: * RaceChip GTS 5 chip tuning module * Wiring kit * 4 fixing clips * 4 cable ties * User's manual
( 1 )
$558.00
Clearance
RaceChip GTS 5 Black chip tuning modules are the best of their kind for high-performance cars. State-of-the-art industry-grade hardware, up-to-the-minute software, ultra-modern technology (up to seven analog and digital channels), comprehensive safety and service package--everything a gearhead could want. Whether you are looking for an intensive driving experience on twisting cross-country roads, strong acceleration away from the lights, or raw power for the open road, RaceChip GTS 5 Black is the answer. Features: * Up to 30 percent more power and torque * Up to 20 percent increase mpg * Seven fine tuning mappings (selectable by Digital User Interface) * Motor-specific software * Warm-up timer preserves the engine * Engine Protect System+ * 2-year engine warranty (restrictions apply) * 5-year product warranty * One time re-programming included if you change your car (certain conditions apply) Hardware: * ARM Cortex-M3 processor * Up to seven analog and digital channels * Chip electronics with Nano-Protect * Pro-grade connector (FCI) * Ultra-resistant composite housing * Pro fixing system In the box: * RaceChip GTS 5 Black chip tuning module * Wiring kit * Four fixing clips * Four cable ties * User's manual
Not Yet Reviewed
$828.00
$579.50
On Sale
DiabloSport inTune i3 PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Select the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
Not Yet Reviewed
$749.95
—
$799.95
$673.95
—
$718.95
On Sale
DiabloSport Trinity 2 EX Platinum Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Platinum Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 33 )
$699.95
—
$710.95
$628.95
—
$638.95
On Sale
SCT X4 Power Flash programmers arrive to you pre-loaded with dyno-proven tune files for select vehicles, to unlock your vehicle's hidden potential! Programming your vehicle with one of SCT's pre-loaded tune files is as easy as 1-2-3. Simply plug the OBD-II connector into vehicle's OBD-II port, select the pre-loaded tune files using the simple to navigate menu and in minutes the X4 programs your vehicle for your particular driving style. Additional features and facts about SCT X4 Power Flash programmers include: * Stores up to 10 custom tune files * Full color LCD display * High-speed data logging/monitoring * Reads/clears DTC trouble codes * Dual analog inputs * Most popular vehicles supported * Installs quickly and easily * Easy restoration back to stock * User adjustable vehicle parameters * USB Interface cable included
( 98 )
$599.00
$539.10
On Sale
DiabloSport Trinity 2 EX Performance programmers are game-changers! Trinity (T2) EX units are extremely capable performance tuners and feature-packed monitor/data logger devices—offering the best of both worlds. They feature an impressive, high-resolution 5 in. capacitive touchscreen, full swipe functionality, and industry-leading gauge designs; plus, jaw-dropping power potential and a powerful, yet simple user interface. DiabloSport Trinity 2 EX Performance programmers feature: * Full-color, high-definition 5 in. touchscreen * Lightning fast read/write times * Performance tuning for mileage, towing, daily driving, and performance * Up to an additional 100 hp and 250 torque on diesel applications; 90 hp and 90 torque on gas * One-Touch, easy menu navigation * Full data-logging capability * Read and clear diagnostic trouble codes * Multi-vehicle licenses available * Correct speedometer and adjust speed/rev limiters (Options, features and coverage may vary, based on vehicle application) * AFM/MDS active fuel management options (Options, features and coverage may vary, based on vehicle application)
( 9 )
$699.95
$628.95
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$567.00
Modal Header