Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
13 Results Found For "gears"
Showing In Stock Items. Show All 16 Items.
Holley Terminator X MAX GM 6L80/90 Transmission Kits
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$587.95
On Sale
Edge EZX Modules
The Edge EZX module is the next-generation inline performance module engineered for today's most powerful diesel trucks. Designed for simple, plug-and-play installation, the EZX connects directly to your factory system in minutes with no cutting or splicing required. Once installed, you'll unlock on-the-fly power level adjustments using the intuitive Edge smartphone app, giving you total control of your truck's performance right from your phone. Whether you're towing heavy loads, daily driving, or pushing your truck to the limit, the EZX is built to deliver. Enjoy instant throttle response, improved drivability, and up to 1,200 ft-lbs of torque to the tires. Engineered to be emissions safe and warranty-friendly with no trace when removed, the EZX offers safe, reliable power without compromise. NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app
( 8 )
$729.95
$511.95
—
$749.95
DiabloSport Pulsar XT Power Modules
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 3 )
$511.95
Ford Performance Parts 3.0L Bronco Performance Calibrations
Upgrade your Bronco Raptor 3.0L EcoBoost engine's capabilities with this performance engine calibration kit from Ford Performance Parts! Features and specifications: * Designed by the experts at Ford Performance specifically for 2022-2024 Bronco Raptor * Dyno tested to deliver improved power and increased engine performance while maintaining OEM reliability * Elevates throttle response for an exhilarating driving experience * Delivers 536 lbs.-ft. of torque at 3,000 rpm for outstanding performance * Provokes 455 peak horsepower at 5,500 rpm for thrilling power * Optimized shift schedule—adjusts shift schedules to maximize individual driving styles * ProCal 4 delivery tool included for a seamless installation * ProCal 4 promotes ease of connectivity with your PC for firmware updates and can read and clear DTCs (tire size and gear ratio cannot be adjusted) * Intended use is for US and Canadian Vehicles Only * Premium Fuel Required (91 Octane minimum) Important Note: ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode". Calibration and ProCal 4 tool are VIN locked. For additional questions contact Tech Line.
Not Yet Reviewed
$725.99
On Sale
COBB Tuning Subaru Accessport V3 Programmers
COBB Tuning Subaru Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Subaru ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Subaru Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Subaru specific features (availability varies by model): * Realtime Tuning: Make changes to the map in real time, while the engine is running; speeds up the tuning process and allows quick changes to features like launch control and map switching * Launch Control: Set RPM threshold for performance launches; builds boost and generates instant horsepower off the line * Flat Foot Shifting: Keep the throttle on the floor and maintain boost between gears with this customizable RPM setting *Adjust Idle: Adjust idle on the fly to compensate for aftermarket parts; separate menus allow adjustment for A/C on and off * Adjust Timing (select STIs only): Globally reduce timing on the fly to compensate for poor-quality pump fuel * Launch Mode (some Forester XTs and WRX CVTs only): Allows manipulation of OE torque limiters to build boost and generate horsepower when launching; driver-controlled
( 4 )
$735.00
—
$770.00
$661.50
—
$693.00
Range Technology Pulsar LT Modules
Range Technology Pulsar LT modules offer complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT affords you the ability to adjust throttle response, tire size, gear ratio, TPMS, and can be used to disable Auto Start/Stop. It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Select the Range Technology Pulsar LT module designed for your vehicle. Features: * Disable Active Fuel Management and Dynamic Fuel Management (AFM/DFM) * Disable Auto Start/Stop * Calibrate speedometer for larger tires * Speed limiter adjustment * Adjust TPMS settings * Modify gear ratio * Clear DTCs * Throttle booster with on-the-fly adjustment * Manual DPF regeneration * Engine idle up * Transmission relearn Note: Features vary by vehicle model/engine.
( 1 )
$562.95
—
$716.95
Superchips TrailDash3 Computer Programmers
Introducing the Superchips TrailDash 3 computer programmers for Jeep Wrangler and Gladiator! Built off the success of their TD2, the all-new TD3 offers a state-of-the-art display with a high-res 5 edge-to-edge full-color swipe screen. Using the latest monitoring technology, TD3 offers a clean and sharp display unlike anything on the market for Jeep owners today. The new, larger processor means faster tune loads, quicker response times, and the best user experience Superchips has ever offered. TD3 is also now Wi-Fi equipped, making internet updates a breeze. The new screen layout has been perfected to complement the look and feel of your Wrangler and Gladiator. The all-new CRAWL screen offers easy access to the data and off-road features you need most, like Sway Bar Disconnect, Axle Lockers, TPMS Disable, Rock Lock, Line Lock, and Engine Idle Up. Of course TD3 still offers tire size and gear ration adjustment—along with tried and true performance tuning for better power, torque, and mileage from your Jeep regardless the situation. You can also optimize your experience with the addition of a broad array of EAS accessories for extra power switches, back-up camera, and additional pressure or temperature sensors. Remember, 2015-21 Wranglers and Gladiators do require a PCM swap process and a unique set of steps required before tuning. It is extremely important you review and understand the steps required before you enjoy the tremendous power and functionality now available with TD3. Order the model recommended for your Jeep.
Not Yet Reviewed
$562.95
—
$715.95
Superchips Flashcal and Amp'D Throttle Booster Power Switch Kits
Superchips Flashcal and Amp'D throttle booster power switch kits pair a dynamic duo that will wake up your vehicle's laggy pedal feeling after that tire/lift upgrade. With these performance bundles, your truck or Jeep will have the most popular tire/gear calibration features along with six throttle sensitivity settings that can be switched on-the-fly. Features and benefits of the Flashcal and Amp'D throttle booster kits: * Corrects speedometer for tire upgrades between 26 in. and 42 in. (vary by application) * Speedometer recalibration for gear/axle swaps (vary by application) * Reads and clears diagnostics trouble codes * Digital battery voltage display * Real-time data logging * Real-time data monitoring * TPMS options (vary by application) * Improves throttle sensitivity * Faster acceleration from a stop, and throughout the rpm band * Quicker spool-up * Push button control to activate six throttle sensitivity levels * The six modes: Stock, low—50 percent, medium—75 percent, high—100 percent, valet, and 400 percent "Wow Mode"
Not Yet Reviewed
$631.95
—
$716.95
Superchips Pulsar XT Computer Programmers
Superchips Pulsar XT computer programmers are innovative inline modules engineered to keep your factory PCM untouched, with no PCM swap or unlock required to add up to 20 hp/30 lb.-ft. of torque. Pulsar XT interacts with sensors under the hood and your PCM signals to enhance the drivability, power, and torque, which can all be operated from the steering wheel controls. This all-new take on performance and calibration lets you enjoy shift-on-the-fly performance gains, with calibration adjustment for larger tires, gear ratio changes, TPMS adjustments, and Auto Start/Stop disable all in one easy-to-use device. Pulsar XTs can also be used to read and clear Diagnostic Troubles Codes and are easily removed for dealer/warranty work with no traces left within the system. Features: * User-adjustable power levels via cruise control buttons * Adjustable power levels on-the-fly * Tire size: 20 in. to 49.9 in. * Gear ratio: 2.00 to 5.99 * Improves economy, towing capabilities, and performance * Performance levels 1 to 5, with incremental power gains * Power level displayed on OEM dash * Tire pressure adjust 20 to 69 psi
( 3 )
$665.95
—
$687.95
Dinan Power Control Units
Dinan Power Control Units deliver more power and more features with improved reliability and drivability than ever offered before, proving performance without sacrifice is alive and well! Dinan Power Control Units (PCUs) are in-line tuning modules based off over a decade of lessons learned in the category. At their core, the plug-and-play control units install between select sensors and the ECU, adjusting these signals to achieve increased performance that the stock programming is unable to approach. What sets them apart is their integration into more than just the fundamental boost sensors, but also additional connections--inclusive of OBDII, resulting in a more capable system that does more than just increase power. Dinan PCUs are controlled by a free Bluetooth app, available for both iOS and Android, and is home to all the potent features the device offers. Equipped with five different pre-set performance levels, you can use your smart phone and PCU app to change performance levels on the fly, revert to stock, set boost by gear, as well as monitor vehicle health via logging, customizable gauges, and code reading/clearing, ensuring a seamless tuning experience that even a novice can be comfortable with. Lastly, safety and reliability have been cornerstones of the Dinan brand for generations and not only does the Dinan PCU not hinder any factory safeguards or emissions controls but incorporates its own safety features as well. Going one step beyond our own internal protections, the PCUs also grant the end user the ability to monitor up to 20 different engine parameters in real time via customizable in-app gauges for verification of worry-free operation. Those same parameters can also be logged/viewed in app (or exported to CSV) for further scrutiny if desired. Dinan Power Control Units are available with a 2-year unlimited mileage product warranty or a 4-year/50k factory matching new car warranty. Select the Dinan PCU with the preferred warranty.
Not Yet Reviewed
$716.95
Edge EvoHT2 Programmers
The EvoHT2 is a premium hand-held performance tuner from Edge Products. The new handheld tuner was designed specifically to give you the most power at the best price, with industry-leading service and quality that comes standard with every Edge product. Now with a color screen, upgraded processor, and numerous new features, you literally hold the power to unlock the hidden potential of your truck or SUV's power and fuel economy in the palm of your hand! Edge EvoHT2 features: * Fuel economy and towing capability improvements * Installs in minutes with no tools required * Speedometer calibration for axle gear and tire size changes * Advanced tuning selections from rev limits to shift points * Monitor engine and transmission parameters * Read and clear diagnostic trouble codes * Results and feature set may vary based on vehicle make, model and aftermarket upgrades on the vehicle. Read all instructions before installation and/or operation of this product.
( 4 )
$536.95
DiabloSport Predator 2 Flash Programmers
DiabloSport Predator 2 flash programmers are back on the prowl! They feature slim, sleek case designs that fit nicely in the palm of your hand--and offer users tremendous performance gains, an unprecedented collection of adjustable options, advanced data logging capabilities, and a lot more. You'll appreciate the Predator 2 full-color, button-controlled screen with improved user interface, and the programmers come loaded with everything you need right out of the box. Get ready to optimize your driving experience with DiabloSport Predator 2 flash programmers. Order the model designed for your vehicle application. Features include: * Performance programs add horsepower and economy * User-adjustable options like tire size, gears, shifting, and more * High-speed OBD-II data logging * Reads/clears diagnostic codes * USB for updates and downloads * Saves stock tune and can easily restore the vehicle back to factory settings * Supports domestic gas and diesel, cars and trucks
( 26 )
$532.95
—
$562.95
On Sale
COBB Tuning Mazda Accessport V3 Programmers
COBB Tuning Mazda Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Mazda ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Mazda Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Mazda specific features: * Advanced Tuning Settings: Dial-in performance features on the Accessport; simply enable "Advanced Tuning Settings" * Launch Control: Builds boost and generates instant horsepower off the line; can be adjusted before each flash * Flat Foot Shift: Keep the throttle on the floor and maintain boost between gears; can be dialed-in before each flash * Wastegate Duty Cycle: Adjust during flashes (-50 to +10 percent) to correct under boost, over boost, and boost cut conditions (requires COBB OTS maps)
Not Yet Reviewed
$715.00
$643.50
