Availability
Showing In Stock Items. Show All 48 Items.
ACCEL Motorcycle Mallory replacement E-Spark modules can be used to replace older UniLite and E-Spark modules currently used in Mallory distributors and conversion kits. They come complete with installation instructions and coil recommendations.
( 2 )
$112.95
All 2018+ FCA (Stellantis) vehicles are built with a Security Gateway Module (SGW) that prevents access to the vehicle from the OBD2 port by anything other than the dealer diagnostic tools. Simply locate and unplug the SGW module, and plug the SGW Bypass block in its place. The OBD2 port will then have full access for use by aftermarket devices such as Z Automotive's Tazer or BurnBox, tuning tools, and code readers. These modules are required for use in 2018 and up Grand Cherokees and Durangos.
Not Yet Reviewed
$69.00
Cardone remanufactured brake control modules result from the most advanced processes. These value-packed units are 100 percent tested for consistent performance. Reverse engineering of examined failed cores allow OE weaknesses to be pinpointed and strengthened. The modules are completely disassembled and components are either renewed or replaced. Get exactly the part you need while saving some green with Cardone remanufactured brake control modules. Order the model designed for your vehicle application.
( 5 )
$106.99
—
$176.99
These Stage 2 performance chips/modules from Motorvation will improve the performance of your car or truck with very little work. Perfect for modified vehicles with low-restriction exhausts and lower-temperature thermostats, they've been programmed to deliver peak power increases under hard throttle conditions such as towing and wide-open throttle. They offer a full range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno-tested to ensure the most possible power without affecting day-to-day drivability.
( 23 )
$77.99
—
$107.99
These Stage 1 performance chips/modules from Motorvation will improve the performance of your car or truck with very little work. Perfect for vehicles with little or no modifications, they're programmed for power increases under hard throttle conditions such as towing and wide-open throttle. They offer a full range of DST programming for the air/fuel ratio, ignition advance, and transmission. They are also fully track and dyno-tested to ensure the most possible power without affecting drivability or fuel economy.
( 5 )
$107.99
Clearance
ACDelco GM Genuine Parts electronic brake control modules help to control your vehicle's anti-lock braking system, and are GM-recommended replacements for your vehicle's original components. Their function controls your vehicle's wheels to enhance braking ability on wet, slippery, or icy road surfaces. These original equipment electronic brake control modules have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Not Yet Reviewed
$242.99
$97.50
Clearance
ACDelco GM Genuine Parts power takeoff control modules (PTO) are available to replace a malfunctioning module. They will allow the transmission in your Chevrolet or GMC HD truck to operate aftermarket accessories such as pumps, generators, or anything that you need when you are out on the job. These modules are the only parts recommended by GM for your Chevrolet and GMC trucks.
Not Yet Reviewed
$146.99
$79.50
These Dorman remanufactured transfer case control modules are pre-programmed out of the box and install easily with plug-and-play wiring connectors. Factory transfer case control modules typically fail through corrosion under normal use; this results in the inability to shift in or out of 4WD mode. The modules are fully stress-tested for durability, so you can be sure that your 4WD won't get stuck in or out of gear next time.
( 19 )
$81.99
The body control module monitors and controls various electronic accessories in a vehicle. Dorman remanufactured body control modules are designed to fix and correct failure-prone components on OEM designs. Easy to install, these Dorman control modules will get you back on the road.
( 1 )
$94.95
Diode Dynamics Tail as Turn modules are plug-and-play units that illuminate your main tail lamps as both brake and turn signals. Now you can put your modern LED tail lamps to full use, and eliminate the incandescent turn signals for a much cleaner look on the road, day and night. Diode Dynamics Tail as Turn modules are made with OEM-size connectors for many Subaru, Infiniti, Nissan, Hyundai, and Toyota models. They also offer DIY modules for vehicles they have not made kits for yet.
Not Yet Reviewed
$79.95
Painless VATS computer chips allow you to bypass the factory programming, making the wiring in your engine swap a snap. Since 1989, most GM fuel injection systems have incorporated a Vehicle Anti-Theft System (VATS) programmed into the stock EPROM or PCM. This means the engine will not run if it is transplanted into a vehicle without the original vehicle steering column and decoder module. If you have one of these engines and your computer has the factory programming, you need Painless VATS computer chips to make your job trouble-free.
( 11 )
$52.99
Lang Tools computer memory savers are designed to maintain the memory of the on-board vehicle computer when the battery is disconnected. These modules prevents loss of certain drivability codes, keyless entry codes, digital radio settings, cellular phone settings, and other memory-related functions. The device also prevents loss of radio function on anti-theft radio systems.
Not Yet Reviewed
$60.99
Motorcyclists, connect your Daytona Twin Tec controllers to your laptop with these special USB interface cables. They include all required adapters for ignition and fuel injection systems. These cables allow you to easily interface with all Dayton Twin Tec engine controls.
Not Yet Reviewed
$101.95
Rick's Motorsport Hot Shot CDI ignition boxes are available for a variety of powersports applications. These Hot Shot series boxes offer an assortment of performance upgrades. Hot Shot CDI ignition boxes provide hotter spark and advanced power curves, allowing your machine to rev up to an additional 1,000 rpm over redline. They may also be used to replace defective CDI boxes on stock machines.
( 4 )
$86.95
—
$104.95
BBR Motorsports rev boxes can raise the rev-limiter of your OEM ignition, or in some applications eliminate it altogether. You'll experience a hotter advance curve for a more complete burn, resulting in crisper throttle response and improved efficiency. This compact unit simply plugs into your stock wiring harness, a direct replacement for the factory CDI ignition box.
Not Yet Reviewed
$99.95
Rick's Motorsport CDI ignition boxes are designed as OEM replacement ignition boxes for an array of powersports applications. These CDI ignition boxes mount in the majority of stock locations. Rick's Motorsport ignition boxes are sold complete, including all wiring to establish all necessary connections. Rick's Motorsport CDI ignition boxes are very dependable and are used by many powersports enthusiasts.
Not Yet Reviewed
$89.95
—
$99.95
ACDelco Gold remanufactured engine control modules are high-quality replacements ideal for many vehicles on the road today. These modules regulate various parts of your vehicle's engine by taking the inputs from sensors and additional modules, and then referencing that information back to other sensors, modules, and areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end-of-line tested to ensure they perform to factory specifications. These Gold remanufactured engine control modules will offer the same fit and performance you would expect from ACDelco.
Not Yet Reviewed
$98.50
—
$104.99
ACDelco GM Genuine Parts remanufactured engine control modules are a GM recommended replacement for your vehicle's original component. These modules regulate various parts of your vehicles engine by taking the inputs from sensors and additional modules and referencing that information back to other sensors, modules, and other areas of the vehicle. Remanufacturing the engine control modules is an industry standard practice that involves disassembly of existing units, and replacing of components that are most prone to wear with new components. Damaged and obsolete parts are replaced and end of line tested to ensure they perform to ACDelco specifications. These GM Genuine Parts are the true OE parts installed during production or validated by GM, for GM vehicles--designed, engineered, and tested to rigorous standards and backed by General Motors. remanufactured engine control modules will offer the performance, durability and service life you would expect from General Motors.
( 8 )
$95.99
Edge OBDII to USB cables are direct replacement components for connecting your Edge CS2 or CTS2 comprehensive gauge display (sold separately) to your vehicle's OBDII port. These connector cables are made to last through your tuning needs.
( 1 )
$64.29
ICT Billet offers ECM mounting trays that are designed to provide your engine control module with secure attachment and stylish good looks. Made from aerospace-grade billet aluminum, these bolt-on ECM mounting trays allow the ECU (Engine Control Unit) to be easily removed for maintenance without having to disconnect harness or removing bracket from the vehicle.
Not Yet Reviewed
$87.99
ICT Billet ECM mounting brackets are designed to secure your engine control module. Made from 14-gauge precision bent steel, the brackets are black powdercoated for durability and provide a stylish appearance. Includes two brackets to secure ECM to the vehicle, along with mounting hardware.
Not Yet Reviewed
$60.99
Clearance
Cardone remanufactured engine control units are 100 percent computer tested to ensure full functionality. Re-solder of critical components ensures superior electrical connections, no intermittent failures, and longer product life. These engine control units receive 100 percent replacement of critical rubber wear components for longer life. On-car vehicle validation routines ensure that modules meet all form, fit, durability, and performance requirements.
Not Yet Reviewed
$80.99
—
$229.99
$57.50
—
$101.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
