Availability
Showing In Stock Items. Show All 3 Items.
On Sale
Burn some "tunes" that'll make your vehicle rock—it all starts with one of these SCT switch chip programmer/burners. Serious drivers like to control every vehicle parameter possible, and that means custom-tuning for performance, fuel economy, surface conditions, towing power, nitrous boost, and more. Now you can easily create accurate and specific tuning with these SCT 4-bank switch chip burners.
( 1 )
$379.99
$341.99
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
The versatile DIYAutoTune MicroSquirt Standalone Engine Management System with 8 ft. harness is an entry-level, fully assembled ECU and universal 30 in. pigtail with varied applications—targeting powersports, single cylinder all the way up to 8 cylinders with up to two fuel and four spark outputs. Over 40 different ignition modes are supported—from mainstream applications like GM LS1, Ford Zetec, Bosch Motronic, and Chrysler Gen III Hemis … to unusual modes like Renix Jeep and the Suzuki Swift GTI. MicroSquirt ECU hardware features: * 2 high impedance injector outputs; max peak current 4.5 amps * 2 dedicated spark outputs * 2 general purpose on/off outputs; can be repurposed as spark outputs * 1 PWM IAC output; can be repurposed as general purpose output * 1 dedicated fuel pump output * 2 variable reluctor conditioned inputs * 1 optoisolated RPM input * 1 flex fuel or general purpose switched input * 7 analog inputs MicroSquirt ECU software features - Supports speed density, alpha-N (TPS based), or MAF based fuel and spark tables - 0.66 microsecond injector pulse width resolution - Allows blending multiple load types, including specialized mode for independent throttle bodies - Supports a wide variety of OEM cam and crank position sensors - Accelerator pump or model-based acceleration enrichment - Closed or open loop idle speed and boost control - On/off nitrous control - Wankel rotary support: 2 rotor engines with separate leading and trailing spark tables - Staged injection - Table switching - 16 x 16 fuel tables - 12 x 12 spark tables - 2 step rev limiter (launch control) with no-lift shifting - Wideband AFR target table - Flex fuel sensor input - Real time barometric correction (external sensor required) - Sequential shift cut and air shifter control MicroSquirt with 8 ft. Harness Transmission Control Options: * MicroSquirt transmission control-free firmware allows you to use MicroSquirt with 30 in. harness to control a number of electronic automatic transmissions (gearboxes). It can work standalone or integrate with one of DIY's ECUs over canbus. * Control applications: GM 4L60E I GM 4L80E I GM 4T40E I GM 5L40E (dev) I A341E I 41TE (dev) I Ford 4R70W I Ford E40D (dev) I Subaru W4A33 and more. MicroSquirt with 8 ft. Harness CAN I/O Box Expansion: * Microsquirt I/O Box firmware allows you to use a Microsquirt as a plug-n-play I/O extension box for MS3 or MS3Pro ECUs. It can offer a useful I/O addition: - 7 Analog inputs (0-5 V variable) - 2 Wheel speed inputs (VR or hall type) - 2 Wheel speed (hall type) or ground-switch inputs - 1 dedicated ground-switch input - 2 high current PWM/switch ground-switching outputs - 4 mid current PWM/switch ground-switching outputs - 1 low current PWM/switch 0-12 V output - Perfect for capturing and logging vehicle speed and additional sensor data
( 5 )
$388.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
