Availability
Get access to even more vehicle data using HP Tuners Prolink+ cables to wire in up to two analog signals and one CAN bus signal simultaneously. Prolink+ cables are designed specifically for MPV12+ and MPV13. Specifications: * Two dedicated 0 to 5 V analog inputs * One CAN bus input--500kbps * 100Hz sampling rate * M8 connector to 5 wire harness * For MPVI2+ and MPVI3 interfaces Note: MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.
( 6 )
$49.99
AutoMeter OBD-II Signal Splitters provide remote mount connections for additional devices. These units are low-profile splitter/pass-throughs, and are ideal for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation. They also provide additional, easy-to-access connection points for other onboard devices requiring access to the OBD-II data stream. Other features of AutoMeter OBD-II Signal Splitters are: * Connects to existing vehicle OBD-II port, providing two remote mount connections * 10 in. straight through leads with strain reliefs between 16-pin male and female connectors compatible with J1962 OBD-II Standards * Please note: device and vehicle compatibility may vary. Signal splitter designed to maintain OBD-II data signal integrity across two remote connection points, but does not correct for data bus termination, traffic conflicts, or compatibility of attached devices.
( 11 )
$46.99
The Edge accessory system (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the evolution CS or CTS. This means Edge can create optional accessories that can be added to the products by the owner at any time. An optional exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. These replacement (or add-on) EGT leads are computer chip programmer input cables. Get the most from your specific accessory system with lead probe cables.
( 2 )
$46.68
Banks Power universal OBD II splitters allow you to connect two devices to the OBDII port. The plug is a right angle for minimal interference. Notes: * For use with Banks devices and retractable steps * Not intended for use with Banks devices AND third-party OBD monitors * Most ECMs will only communicate with one diagnostic device at a time. Using a splitter will result in the vehicle's ECM having to choose between devices. One of your devices will not operate properly.
Not Yet Reviewed
$30.00
Take advantage of your BRP vehicle's full potential with an HP Tuners OBDII adapter cable. Plug the gray insert directly into your BRP's diagnostic port and the black OBDII-end into your MPVI2, MPVI2+, or MPVI3 interface for full functionality. This OBDII adapter cable is required for tuning any supported BRP vehicles, including Can-Am and Sea-Doo.
Not Yet Reviewed
$49.99
Want to maximize the performance of your current HP Tuners setup? HP Tuners offer computer programmer accessories, from USB cables to OBD-2 cables, EIO plugs, and more. These quality hardware components can be used as replacements for worn or misplaced originals, or to upgrade your existing setup.
( 14 )
$34.99
—
$49.99
Looking for a safe, simple way to mount your FiTech color touch screen tuner? FiTech's Premium magnetic handheld mounts provide an easy and effective way to secure the touch screen controller. They allow you to mount the touch screen nearly anywhere in your car with a sturdy, adjustable stand equipped with two extremely strong magnets to firmly secure the handheld through vibrations, shocks, bumps, and even during spirited track laps! FiTech Premium magnetic handheld mounts are supplied with the injection molded stand, a mounting disc to apply to the dash or console, and a mounting plate designed specifically for the FiTech color touch screen handheld monitor. You can position the tuner where you can easily view the engine parameters and tuning of your FiTech EFI system.
( 2 )
$51.00
Keep an eye on your X4 and the road ahead with SCT suction cup mounts for your windshield. These mounts securely hold your programmer with an industrial-strength suction cup, allowing you to safely monitor critical system data without blocking your view. You don't want to hold your X4 while driving, and often there's no passenger to assist you. The solution is quick, easy, and economical--SCT suction cup mounts.
( 6 )
$22.99
Bully Dog replacement pyrometer probes are designed to read exhaust gas temperatures consistently and accurately. They feature a thread-in style port and connect easily to your Bully Dog pyrometer gauge.
Not Yet Reviewed
$50.99
Bully Dog RAM suction cup mounting kits position your performance device for the best in-use experience possible. Featuring a strong and effective suction cup, stout arms, and a custom T-slot adapter, each of these kits is specifically designed to work with your GT or WatchDog unit. Brace your device on the proper pedestals for secure, safe usage--Bully Dog RAM suction cup mounting kits.
( 1 )
$32.99
SCT single program and 5-program, 4-bank custom eliminator switch chips are tuned for specific car and truck applications. Order the module recommended for your vehicle. Features include: * Can be custom tuned by one of SCT's Custom Tuning dealers worldwide * Installation only takes 10-15 minutes with standard hand tools * Perfect for nitrous or towing applications. Switch tunes on the fly or at the track * Mountable switch panel for easy access to switching tune files * Built-in anti-theft selection that disables PCM and prevents the vehicle from starting NOTE: This product does not support any changes to your vehicle's emission system.
( 2 )
$33.79
Painless VATS computer chips allow you to bypass the factory programming, making the wiring in your engine swap a snap. Since 1989, most GM fuel injection systems have incorporated a Vehicle Anti-Theft System (VATS) programmed into the stock EPROM or PCM. This means the engine will not run if it is transplanted into a vehicle without the original vehicle steering column and decoder module. If you have one of these engines and your computer has the factory programming, you need Painless VATS computer chips to make your job trouble-free.
( 11 )
$49.99
—
$52.99
SCT magnetic windshield mounts feature heavy-duty suction cup bases that securely adhere to windshield glass and four ultra-strong neodymium magnets that ensure your device stays front-and-center--no matter what terrain you travel. Each of these SCT BDX window mounts include a 90 degree HDMI elbow that not only eliminates potential strain on your port, but also ensures your wires stay tucked perfectly for the cleanest setup around.
( 1 )
$25.79
SCT Livewire TS+ window mounts are designed specifically to help utilize all of the innovative features of your Livewire TS+ tuner/programmer. Use these mounts to attach your module to the vehicle window, so you can easily and safely read the display at a glance. You can affix the Livewire TS+ vertically or landscape-style for the perfect viewing angle. Keep your real-time gauges and data monitoring safely visible with SCT Livewire TS+ window mounts.
Not Yet Reviewed
$25.79
Open up the power of your diesel engine using Bully Dog GT diesel unlock cables. They feature pre-terminated connections and hook up directly to your Bully Dog GT diesel tuner.
( 2 )
$41.99
SCT Livewire TS+ pod adapters allow you to make use of any existing 2 1/16 in. gauge pods. Designed specifically for Livewire TS+ gauge tuners, these adapters make convenient A-pillar mounting a snap. The T-slot and optional ball mount design ensure a quick and easy installation of your tuner. Procure a clean and secure mounting location with SCT Livewire TS+ pod adapters.
Not Yet Reviewed
$22.79
Gale Banks is an innovative engineer in the world of diesel performance, and his company is a leader in the aftermarket industry. Banks Power interconnect cables allow your vehicle to communicate with their various parts to ensure the best outcome. These cables allow Banks tuners and/or SpeedBrakes to connect with the vehicle's OBD-II port in order for the tuner, the vehicle, and the iQ, if so equipped, to communicate with each other. Banks Power interconnect cables are designed to communicate across all of their platforms to obtain maximum performance and bring your vehicle to life.
Not Yet Reviewed
$23.00
—
$38.00
HP Tuners M8 HPTNET cables are conveniently offered as standalone replacements or spares to keep your GM E41 ECM upgrade kit running smoothly. Identical to the one included in the kits, they ensure seamless communication and operation during ECM upgrades. Whether you've misplaced or damaged your existing cable, or simply need an extra, HP's M8 HPTNET cable is ready to meet your needs.
Not Yet Reviewed
$29.99
ACDelco computer mounting brackets are GM-recommended replacement parts. These original equipment brackets deliver the ideal fit and function to restore support of your computer. Keep your computer mounted securely; order the ACDelco replacement brackets designed for your application. .
( 2 )
$20.99
—
$41.99
ACDelco offers a variety of accessory control modules—from active noise cancellation and theft control modules, to A/C and DC power control modules and more. These OE-style replacements are designed, engineered, and tested to rigorous standards to ensure proper fit and performance. Nearly a hundred models are available for countless vehicles from the 1990s and up. Order the accessory control module recommended for your application.
Not Yet Reviewed
$27.99
—
$52.99
Bully Dog offers replacement HDMI cables for their GT, Heavy-Duty GT, and WatchDog computer programmers. These 20-gauge power harnesses are butt connectors for the power wire extension, and the kits include both male and female HDMI cable ends.
Not Yet Reviewed
$35.79
On Sale
DiabloSport Trinity analog harnesses are designed to make hooking up external sensors much easier. This includes things like boost gauges, air/fuel meters, and EGT sensors. DiabloSport takes their products seriously and it shows, having each and every product inspected not only by machine, but also by their staff. DiabloSport Trinity analog harnesses not only make it possible for you to improve complex computer systems, but they're also easy to use.
( 1 )
$46.30
$25.47
Bully Dog HDMI and power wire extension kits include all parts necessary to extend the harness between the OBD-II block and Bully Dog device (for GT, WatchDog, or PMT tuner) by 5 ft. The kits are perfect for positioning your programmer on a mirror mount, an overhead console mount, or other mount type high on the dash—allowing you to conceal wires in the headliner for a neat installation. This is the power wire extension cable kit only. (The WatchDog, GT, and PMT tuner are not included.) Kit features and parts include: * 5 ft. male-to-female HDMI cable * 5 ft. 20-gauge power wire * Butt connector for power wire extension
Not Yet Reviewed
$21.99
Clearance
For the past 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative for replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your one source for the highest quality remanufactured hard parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their engineers pinpoint OE design weaknesses by examining failed cores. All of the technology and expertise that go into their remanufacturing processes can only be found behind the Cardone name. These body control modules are available for vehicles from the early 1990s and up. Additional features include: * The most advanced engineering and remanufacturing processes to provide you with high-technology replacement parts * 100 percent disassembly and component renewal to ensure that you receive reliable products * 100 percent replacement of critical rubber wear components so that you receive longer life from your Cardone unit * 100 percent computerized testing for quality and reliability * 100 percent appearance-inspected to ensure your satisfaction
Not Yet Reviewed
$87.99
$21.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
