Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
9 Results Found For "small"
Showing In Stock Items. Show All 16 Items.
Not Showing Customizable Items. View Customizable Items.
AEM Electronics Tesla Small Drive Unit Control Boards
AEM Electronics Tesla small drive unit control boards allow you to install a Tesla SDU in any non-OEM application, unlocking complete control when paired with an AEM VCU. The system provides full control of the SDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. AEM EV's Tesla inverter control boards act as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's SDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. Note: Inverter control boards must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla SDU. This system is designed for conversion and motorsports vehicles with Tesla SDU swaps. It will not control a Tesla SDU in a Tesla OE chassis. Features: * Programmable, direct replacement for Tesla SDU inverter control board (ICB) * Allows for customized control of torque and regenerative braking curves, torque rates, and motor spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications * SDU board works with both front and rear variants of the Tesla SDU
Not Yet Reviewed
$1,126.95
DiabloSport Modified PCM and inTune i3 Packages
After installation, DiabloSport modified PCM and inTune i3 packages help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride without popping the hood! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, a DiabloSport inTune i3 tuning device is included to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, boost your vehicle's performance with the DiabloSport modified PCM and inTune i3 package best suited for your ride! More product and specifications include: * The pre-loaded i3 programmer includes dyno-tested performance programs designed specifically for your ride * Responsive high-definition touchscreen that allows you to navigate menus easily while retaining a small form factor * Easily updateable by wi-fi on both Windows and Mac-based operating systems * Multi-vehicle licensing * Scan and clear DTCs * Calibrate speedometer for different tire sizes and/or gear changes * Tune the transmission shift points and firmness * Adjust speed, rev limiters, and much more
( 1 )
$1,349.95
—
$1,399.95
On Sale
Holley Terminator X Engine Management Systems
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 96 )
$1,399.95
—
$1,549.95
$1,258.95
—
$1,393.95
Holley Terminator X MAX Engine Control Modules
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,229.95
FiTech Ultimate LS Standalone ECUs
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$1,202.00
Summit Racing™ Megasquirt Engine Management Combos
Optimize your engine for the best performance and operation with our Summit Racing™ Megasquirt Engine Management Combos. These combo kits provide you with the flexibility to precisely tune your engine—which will make a noticeable difference in its attitude from startup to wide-open throttle!
( 1 )
$1,099.97
Edelbrock Pro-Flo 4 LS Self Learning Engine Management Systems
Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.
( 6 )
$1,210.95
—
$1,222.95
On Sale
Edge Juice Modules with Attitude CTS3 Programmers
Edge Products' Juice modules with Attitude CTS3 programmers are the ultimate tuner for the average diesel owner and horsepower junkies too! Featuring state-of-the-art CTS3 technology, the Juice with Attitude offers a whole new realm of features to continue pushing the limits of on-the-fly power, control, and monitoring. This in-cabin controller not only monitors vital vehicle parameters but allows you to shift-on-the-fly by controlling the Juice module for maximum control and power gains. If you own a diesel truck and you're looking for complete control over your driving experience, look no further than Juice with Attitude CTS3 programmers. Additional product attributes: * Slim, sleek case with state-of-the-art swipe technology * 5 in. full color, high-resolution touchscreen with the latest swipe technology (with one-touch easy menu navigation) * Light sensitivity meter to dim screen as ambient light decreases * HDMI style plug for power and linking EAS accessories * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge layouts, including on-the-fly power level adjustment on screen * Wi-Fi updates and notification center * Multiple power levels for mileage, towing, daily driving, performance, and extreme power curves * Additional Hot Unlock available for some applications for an additional power level * Up to 180 hp and 400 torque gains, depending on application * Dynamic built-in safety features like EGT backdown, cold engine protection, transmission slip backdown and more Note: Some features may vary by make/model/year. Configure your vehicle to search for parts and features specifically for your application.
Not Yet Reviewed
$1,349.95
$1,213.95
Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits
Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.
Not Yet Reviewed
$1,364.95
—
$1,377.95
