Availability
Showing In Stock Items. Show All 18 Items.
Summit Bucks
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 500 )
$63.99
—
$163.99
Summit Bucks
Add one-wire power to your setup with Jones Racing alternators! That's right--only one 10-gauge wire needs to be run from the back terminal to your battery. Their switchless design offers high performance that weighs less and is more efficient. And the more efficient your engine is, the more horsepower you can achieve! Give your electrical system a jolt with Jones Racing alternators.
Not Yet Reviewed
$276.21
—
$320.42
Summit Bucks
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$24.95
—
$408.95
Summit Bucks
These R&M replacement spark plug wire clamps are available in a variety of colors for a truly custom look. These clamps are injection-molded with heat-resistant and non-conductive glass-filled polyester.
( 4 )
$22.99
—
$47.99
Summit Bucks
Quarter Master Ultra-Duty starters give your race car a good start to a great finish! These mini starters are ready for track duty with massive cranking power, heavy-duty solenoid and bearing assemblies, and CNC-machined billet aluminum adapter mounts for increased torque and a precision flywheel fit. Quarter Master Ultra-Duty starters are ready to meet the temperatures and demands of your high-compression engine. Think you're saving money buying a less expensive starter? Inferior starters will leave you cold on the street and track--not good! Bolt on the power to get started--bolt on track-tested Ultra-Duty starters from Quarter Master.
( 2 )
$396.62
—
$442.99
Summit Bucks
When you're installing your Quarter Master starter and you need to ensure proper starter-to-ring-gear clearance, Quarter Master starter shims are the solution. Quarter Master offers these starter shims in a choice of sizes to provide the necessary gap.
Not Yet Reviewed
$15.72
Summit Bucks
Mishimoto offers replacement starters you can rely on! When your factory starter fails, these Mishimoto replacements will save you a search and won't cost you a fortune, either.
Not Yet Reviewed
$248.95
Summit Bucks
Replace your dull or rusted battery tie-down with Mishimoto CNC-machined battery tie-downs for Subaru. They will liven up the look of your engine bay with precision machined 6061 billet aluminum finished in an array of durable anodized finishes to complement your under-the-hood appearance. These battery tie-downs will fit most battery sizes of Subaru vehicles, include two nylon washers for a scratch-free installation, and come with the unbeatable Mishimoto Lifetime Warranty.
Not Yet Reviewed
$66.95
Summit Bucks
ICP sensor failure is a common problem with high-mileage diesels typically resulting in trouble starting, rough idling, and sudden power loss. Keep your vehicle running right with Mishimoto injector control pressure (ICP) sensors that meet all OEM specifications to properly restore engine performance and startup capability. Each kit includes a high-quality sensor, new pigtail harness to eliminate issues from the potentially contaminated stock connector, a durable O-ring seal to ensure leak-free fitment, and heat-shrink butt connectors for easy installation. As with all their products, these ICP sensor kits are backed by the Mishimoto Lifetime Warranty for peace of mind and dependable performance. Select the proper kit for your diesel truck.
Not Yet Reviewed
$64.95
Summit Bucks
Upgrade to the ultimate in off-road lighting solutions with the Borne Off-Road light bar wiring harnesses. Designed to withstand the harshest of elements with weatherproof construction and IP68 rating, each harness comes with two intuitive backlit rocker switches that offer sharp styling and effortless control. Available in two plug sizes to perfectly suit your lightbar setup, installation is a breeze, and individual connections to rocker switches make wiring through the vehicle even easier. Backed by the Borne Off-Road Lifetime Warranty, you'll be able to light up your path and hit the trail with peace of mind. Select the harness designed for Borne 10 in. to 20 in. light bars or the harness for 30 in. to 50 in. light bars.
Not Yet Reviewed
$68.95
Summit Bucks
R&M jet boat billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it allows you to route your wires away from exhaust heat without worrying about them coming loose. They are available for big block Chevy engines only. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for under header installation * Heat-resistant, glass-filled polyester, non-conductive clamps included
Not Yet Reviewed
$94.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
