Availability
Special Offer
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 249 )
$224.95
—
$375.45
Special Offer
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 337 )
$256.45
—
$437.45
Special Offer
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 133 )
$303.99
—
$495.95
Special Offer
PerTronix Flame-Thrower billet plug and play marine distributors feature the Ignitor II® electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 76 )
$341.50
—
$438.95
Special Offer
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 58 )
$360.95
Special Offer
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 52 )
$169.60
—
$408.45
Special Offer
PerTronix Flame-Thrower magnetic trigger billet distributors are perfect alternatives to the more expensive distributors that competitors offer. These distributors feature a precision magnetic pickup coil and reluctor for extremely accurate signaling at low and high rpm. An over-molded magnetic pickup coil supports windings, while providing excellent resistance to corrosion. Tyco Mate-N-Lok connectors work with most ignition system harnesses. A specially engineered reluctor made from lightweight FC-0208 alloy offers superior dimensional stability for symmetrical spark separation. PerTronix Flame-Thrower magnetic trigger billet distributors are compatible with most capacitive discharge ignition boxes.
( 12 )
$280.31
—
$422.95
Special Offer
PerTronix is a leading producer of electronic distributors for gas, propane, and LP-powered industrial engines. Many Wisconsin and Continental engines are equipped with these industrial distributors from the factory. Proven performance, reduced maintenance downtime, improved economy, faster starts, and extended tune-up intervals are just some of the great benefits of these distributors. They are also direct replacements for many points-type Delco and Prestolite distributors. Integrated Ignitor electronic ignition technology eliminates the need for points and a condenser. The lightweight, yet durable housing has a superior venting system and O-ring seal to reduce oil leakage around the distributors. Each of these PerTronix industrial distributors comes with a non-tracking cap, rotor, and dust cover.
( 13 )
$239.47
—
$465.95
Special Offer
PerTronix Flame-Thrower British engine performance distributors are modeled after the 45D Series distributor. Built using all-new castings, these distributors are precision-machined for an exact fit. They deliver twice the voltage to your spark plugs, increasing horsepower, fuel economy, and spark plug life. Flame-Thrower Performance distributors for British engines feature rotating cobalt magnets that trigger a Hall Effect integrated circuit. There are no points to burn or moving parts to wear out--in fact, you can expect a 2:1 improvement over points in current fall time for increased coil output. Their tailored advance curve provides optimal performance and drivability. PerTronix Flame-Thrower British engine performance distributors are made using an epoxy molding, making the module impervious to oil, grease, dirt, and moisture. Offered for 12 V negative and positive ground systems, these distributors feature stable timing with no need for adjustments.
( 11 )
$257.36
—
$378.95
Special Offer
PerTronix Flame-Thrower plug-and-play marine distributors are an amazing piece of equipment that'll have your engine purring like a kitten. They're easy to install; simply connect two wires and you're ready to go. The Ignitor III® module increases spark energy, burn time, horsepower, and mileage, as well as improving combustion. Memory function stores rev limits, while built-in reverse polarity and over-current protection shuts down the system to prevent damage. PerTronix distributors feature lubricated bronze lower bushings and upper ball bearings—which work in conjunction for decreased friction and high rpm vibration—and an adjustable mechanical advance (with limiting functions) permits multiple settings. These distributors are factory set with a performance advance curve, and additional springs are provided for custom advance curves. A suppression style or spiral-wound spark plug wires must be used.
( 1 )
$412.95
—
$436.45
Special Offer
Replace your worn out Lucas 35D distributor with a Pertronix Flame-Thrower performance cast Rover V8 distributor that will deliver the performance you demand. These Flame-Thrower performance distributors are the perfect solution for Rover V8 engine swaps. Available with integrated Ignitor or Ignitor II technology increases energy levels and provides maintenance free operation. Installation is simple with only two wires to attach. These distributors are made from all new castings and modeled after the original Lucas 35D housing. Each distributor is then precision machined for an exact fit. Additional features include: * All new lightweight cast aluminum housing * Integrated electronic ignition delivers more voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life * Rotating cobalt magnets trigger the Hall Effect integrated circuit which provides precise timing * High dielectric strength distributor cap * Balanced rotor with overmolded brass contacts * Legal in all 50 states carrying CARB EO# D-57-23
( 8 )
$270.40
—
$360.95
Special Offer
These PerTronix billet plug and play distributors feature the Ignitor II electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 6 )
$341.50
—
$495.95
Special Offer
PerTronix Flame-Thrower HP distributors feature new, lightweight, cast aluminum housings and a tailored advance curve for optimal performance and drivability. They use an integrated Ignitor II® electronic ignition with variable dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. The distributors develop, on average, four times more available energy between 3,000 and 5,000 rpm and two times more available plug voltage. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing ignition coil and module life. The PerTronix Flame-Thrower HP distributors include a balanced rotor with an over-molded brass contact and a high-dielectric cap with brass terminals.
Not Yet Reviewed
$288.90
—
$339.99
Special Offer
PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor I® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 2 )
$298.97
—
$422.95
Special Offer
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 981 )
$279.98
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
