Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Ignitions & Electrical
Showing In Stock Items. Show All 239 Items.
Not Showing Customizable Items. View Customizable Items.
On Sale
AEM Electronics Replacement Wideband UEGO Controller Air/Fuel Ratio Gauge Components
AEM Electronics Wideband UEGO Controller Air/Fuel ratio gauge components are designed to be used with AEM wideband UEGO controller air/fuel ratio gauges. Whether you need to replace your sensor or cable, these parts will help you to get your gauge back in working order.
( 23 )
$42.94
—
$155.95
$38.65
—
$140.35
On Sale
MSD Programmable Digital 6AL-2 Ignition Boxes
These new MSD programmable digital 6AL-2 ignition boxes give you the ability to tune an ignition curve or boost timing map from a PC. You still receive the 20 degree duration of multiple sparks combined with higher output to ensure complete combustion. The all-new MSD programmable digital 6AL-2 ignition boxes will easily connect to nearly any 12 V negative ground distributor system, even Hall-effect pickups. They offer higher output with up to 135mJ and 535 V and accept points and mag pickup triggers.
( 46 )
$284.99
$256.49
On Sale
Summit Racing™ Digital RTR Plus Billet Distributors
We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van. These Ready-to-Run distributors must use a coil with .5 to .7 Ohms primary resistance and 5 to 7 mH primary inductance.
( 9 )
$349.99
—
$389.99
$187.99
—
$220.99
On Sale
Edge EZ Plug-In Modules
These Edge EZ modules unleash the potential of this monster by carefully monitoring rpm, timing, turbo boost pressure, and fueling parameters, and adjusting the fueling and timing to maximize power, torque, and drivability. The Edge EZ modules allow maximum fueling at full turbo boost, and provide an additional 40 to 70 hp and up to 220 ft.-lbs. of torque. Simply plug in the Edge EZ connectors into two stock connections, and you're ready to go. These modules can also be stacked with other upgrades to deliver even more power. They can't be beat for easy installation and power upgrades. Go ahead, install an EZ today and feel the incredible difference it makes!
( 10 )
$539.95
$484.95
On Sale
ACCEL Super Coils
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 812 )
$27.99
—
$495.95
$17.95
—
$269.95
On Sale
AEM Induction FAE Wideband Oxygen Sensors
Co-developed, the AEM Induction FAE wideband oxygen sensors have a faster response time and are less prone to failure in high performance vehicles. These replacements will provide the same performance and durability, along with the perfect fit in your AEM wideband kit. Continue receiving accurate data quickly with these replacement AEM/FAE O2 sensors.
Not Yet Reviewed
$164.95
$148.45
On Sale
AEM Electronics CD-5 Carbon Digital Racing Dash Displays
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,199.95
—
$1,749.95
$1,078.95
—
$1,573.95
On Sale
AEM Electronics IGBT Inductive Smart Coils
AEM Electronics high-output, insulated gate bipolar transistor (IGBT) inductive Smart Coils are designed for use on applications that do not have an external ignitor. The tradeoff between adequate spark energy and adequate spark duration ends with AEM's inductive Smart Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running high compression, high RPM, forced induction and/or nitrous engines. AEM's inductive Smart Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts! That's as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration. Smart Coil's feature a weather and shockproof design that can be mounted directly to the engine, and they cost less than other aftermarket LS coils. Upgrade your ignition on your forced induction, nitrous, or high RPM engine today with AEM Electronics IGBT inductive Smart Coils.
( 2 )
$92.95
$83.66
On Sale
PerTronix Digital HP Ignition Boxes
With their adjustable start retard, Digital HP boxes are ideal for street cruisers up through hard-starting, high-compression race engines. Don't let their size fool you; PerTronix Digital HP ignition boxes hold 30 percent more energy than competitors and are built for the long run. Additional Features: * Multiple spark all the way to redline * RPM activated trigger * Locking Molex connector * Tachometer output lead * Onboard diagnostics and tach calibration
( 49 )
$329.96
—
$329.99
$296.96
—
$296.99
On Sale
PerTronix Flame-Thrower Type 1 Engine Distributors
Now you can get a quality distributor that delivers excellent performance and doesn't break the bank. Pertronix has taken all of the things that you like about the Bosch 009 distributor and the performance capabilities of the 010 and 060 distributors and designed them into these distributors. To top things off, these distributors feature integrated Ignitor electronics.
( 55 )
$206.99
—
$247.62
$186.29
—
$222.86
On Sale
AEM Electronics MAP Sensor Kits
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$92.95
—
$219.95
$83.66
—
$196.95
On Sale
ACCEL Performance Spark Plugs
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 295 )
$47.21
$26.95
On Sale
AEM Electronics Wideband UEGO Sensors
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$117.95
$106.15
On Sale
APR Ignition Coils
APR designs their ignition coils to be direct plug-and-play upgrades to your factory coils. They provide greater energy output (by up to 10 percent) that ensures a stronger and more consistent spark and include the coveted red housing made popular by the Audi R8. Enhance both your vehicle's style and performance with APR ignition coils!
( 3 )
$36.95
—
$52.95
$33.26
—
$47.66
On Sale
FiTech Go-Spark Ignition Coils
FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.
( 3 )
$45.00
—
$369.00
$40.50
—
$332.10
On Sale
COBB Tuning Ford Accessport V3 Programmers
COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group
( 8 )
$526.99
—
$1,224.99
$526.50
—
$1,075.50
On Sale
Summit Racing™ Ultra HP Smart Coils
Summit Racing™ Ultra-High Performance Smart ignition coils are the hottest coil near plug inductive ignition coils you can buy. We worked with our supplier for 2 years to engineer and develop the hottest coils that can be bought and offer them at the best price point on the market. They achieve greater spark energy than all others while using less current or amperage. A smart coil is a coil that has the igniter built in. Built with an internal IGBT (insulated gate bipolar transistor) they are perfect for use with most high performance aftermarket EFI systems that can drive a distributor-less ignition or remote "coil on" or "coil near" plug system. They're available individually or in sets of eight that come with the connector and pins. Features and benefits: * Internal IGBT- (Insulated Gate Bipolar Transistor) Igniter * Max Output voltage: no load 51,000 V * Peak Output energy: 236mj * Peak Secondary current: 130ma * Turns Ratio: 82:1 * Maximum Current: 14.5A @ 8ms * Maximum Voltage: 17 Vdc * Base dwell: 3.0ms * Max continuous dwell: 9ms—not to exceed 40 percent duty cycle * Max intermittent dwell: 80 percent duty cycle 5 second maximum * 1 Year Warranty
Not Yet Reviewed
$89.99
—
$719.92
$69.99
—
$519.99
On Sale
AEM Electronics High Output Inductive Dumb Ignition Coils
AEM Electronics high output inductive dumb ignition coils ain't so dumb! Designed to be used with an igniter, these AEM "dumb" coils offer CDI-like spark energy and voltage, plus the longer spark duration of inductive coils--and that's pretty smart! But that's not all. They easily install in the place of your existing coils, are shock and weather-proof, affordable, and they deliver world-class performance. That makes you smart for choosing them! If you want massive spark energy with an incredibly long spark duration, AEM high output inductive dumb ignition coils are an intelligent solution for any enthusiast running boost, nitrous, or high rpm.
( 2 )
$92.95
$83.66
On Sale
AEM Electronics 22-Channel CAN Sensor Modules
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$449.95
$403.95
On Sale
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1029 )
$124.61
—
$242.66
$112.15
—
$218.39
On Sale
FiTech Go-Spark Ignition Box and Coil Kits
Maximize your engine's potential with the FiTech Go-Spark ignition box and coil kits! You've got the fuel, now upgrade the spark with the FiTech Go-Spark Capacitive Discharge Ignition! The Go-Spark CDI produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. The Go-Spark CDI was designed for 4, 6, and 8-cylinder engines equipped with a distributor. It accepts the trigger signal from an HEI, amplifier, points or 2-wire non-magnetic pickup distributors. A separate 12 V square wave tach output can be used to trigger the EFI system and/or a tach. Plus, high-energy coil enhances CDI performance. Go-Spark CDI features: * Produces series of sparks below 2,500 rpm * Boosts starting power, idle quality, and throttle response * High energy coil enhances CDI performance * Delivers full energy sparks through racing rpm * Ensures complete combustion of fuel mixture * Accepts Trigger Signal from variety of distributors (distributor not included) * Usable with separate 12-volt Square Wave Tach Output
Not Yet Reviewed
$269.99
$242.99
On Sale
AEM Electronics Water/Oil Temperature Sensor Kits
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$58.09
—
$75.45
$52.28
—
$67.91
On Sale
Summit Racing™ Reproduction Wiring Harnesses
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are built from factory drawings and prints. They are made of high-quality Automotive Grade Wire using factory style fuse blocks, connectors and plug ends, and correct wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams. Please refer to the factory diagrams and or service manuals for your specific vehicle.
( 87 )
$15.99
—
$849.99
$13.59
—
$722.49
On Sale
Dinan Ignition Coils
Dinan ignition coils are designed to be direct plug-and-play replacements, or upgrades, to factory coils and provide greater energy output. With up to 10 percent more energy output than stock, the coils ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark, your ignition system will be more efficient with a new set of Dinan coils. They are available in several styles. For those that like to showcase engine modifications, Dinan coils come in a variety of unique housing colors with the Dinan logo for the perfect personalized touch.
( 13 )
$34.22
—
$40.65
$29.95
—
$36.59
