Availability
On Sale
Summit Bucks
Upgrade to the ultimate in off-road lighting solutions with the Borne Off-Road light bar wiring harnesses. Designed to withstand the harshest of elements with weatherproof construction and IP68 rating, each harness comes with two intuitive backlit rocker switches that offer sharp styling and effortless control. Available in two plug sizes to perfectly suit your lightbar setup, installation is a breeze, and individual connections to rocker switches make wiring through the vehicle even easier. Backed by the Borne Off-Road Lifetime Warranty, you'll be able to light up your path and hit the trail with peace of mind. Select the harness designed for Borne 10 in. to 20 in. light bars or the harness for 30 in. to 50 in. light bars.
Not Yet Reviewed
$68.95
$62.06
On Sale
Try a completely modular battery amperage management system--i-BAR battery terminal adapters from XS Power. i-BAR adapters allow you to fit your XS Power battery to several applications, creating SAE posts for your domestic or import, GM side posts, a combination of both, or marine applications! These integrated battery amperage rails are great for car audio enthusiasts, allowing you to create a system for multiple connections, with as many as four top posts with side terminals. Compatible with all XS Power batteries (some may require additional adapters), i-BAR battery terminal adapters from XS Power are a clean, easy way to add multiple cables and power up your ride.
( 32 )
$22.49
—
$54.99
$20.24
—
$50.59
On Sale
Whether your engine has forced induction or is naturally aspirated, Holley MAP sensors will keep your engine performing at its best. They're available in 1, 2, 3, 3.5, 5, and 7-bar models, with a variety of psi ranges. Choose the style preferred for your application.
( 18 )
$112.95
—
$199.95
$101.65
—
$179.95
On Sale
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$35.65
$32.09
On Sale
The Painless track rocker switch panels are as tough as any race you'll encounter. The weatherproof LED On/Off switches are enclosed in a powder-coated steel housing. Available in a 4, 6, or 8 switch option, with mounting options available for dash mount, roll bar mount (1 5/8" and 1 3/4"), or flanged under dash mount. Deigned to be plug-n-play with the Painless track rocker relay control system and includes everything required to install and mount.
Not Yet Reviewed
$125.99
—
$299.99
$113.39
—
$269.99
On Sale
Painless Trail Rocker switch panels are as rugged as any trail you'll encounter. The weatherproof LED On/Off switches are enclosed in a powdercoated steel housing. They are available in 4-, 6-, or 8-switch panels with mounting options available for dash mount, roll bar mount (1 5/8 in. and 1 3/4 in.), or flanged under dash mount. Designed to be plug-and-play with the Painless Trail Rocker systems, the panels include optional winch wiring. Kits include everything required to install and mount.
( 2 )
$169.99
—
$269.99
$152.99
—
$242.99
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
—
$206.95
$56.65
—
$186.25
On Sale
Painless Wiring off-road switch panels clean up your dashboard wiring by putting all of your switches in one convenient, organized place. These off-road switch panels are the only panels to consider if your vehicle will be subject to harsh outdoor conditions. These panels are available with either a push-button or keyed ignition switch for added security. All switches and circuit breakers are protected by weather resistant boots and all circuits are protected with circuit breakers.
Not Yet Reviewed
$224.99
—
$274.99
$202.49
—
$247.49
On Sale
Taylor battery hold-down kits include just the essential hardware and can work with custom battery trays, as well as many stock battery trays.
( 11 )
$10.25
$9.22
On Sale
The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.
( 11 )
$179.95
—
$184.95
$98.95
—
$166.45
On Sale
Mount XS Power battery terminal adapters to get things started. They offer several styles of battery post and stud adapters to fit your vehicle or boat XS Power battery. Brass short and tall style post adapters with M6 threads, zinc plated adapters, and brass stud adapters with stainless wingnuts are ready to work with most of their deep-cycle batteries. Order the style best suited for your application. Get the juice flowing in your land or water machine with battery terminal adapters from XS Power.
( 46 )
$14.99
$13.49
On Sale
LoD Offroad LED light wiring harnesses are perfect for cars, trucks, off-road utility vehicles, and even trailers. Each wiring harness kit features a 40 amp relay, waterproof on/off switch, and waterproof fuse holder. The LoD Offroad premium wiring harnesses come complete with female blade terminals to ensure proper connection. They offer quick and easy installation with the included wiring diagram. Specs: * 12 ft. relay wiring harnesses for LED lights * 12 V 40-amp relay * 3-pin On/Off rocker switch * UL approved * Work with a variety of on/off-road vehicles
( 1 )
$27.90
$22.32
On Sale
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 89 )
$1,789.95
—
$2,499.95
$1,609.95
—
$2,248.95
On Sale
Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)
( 94 )
$1,349.95
—
$1,899.95
$1,213.95
—
$1,708.95
On Sale
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
$420.95
On Sale
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$1,999.95
—
$2,649.95
$1,798.95
—
$2,383.95
On Sale
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 12 )
$57.49
—
$158.95
$51.75
—
$143.05
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
On Sale
MechMan offers high-output alternators in a variety of styles, including 240 amp, 320 amp, and 370 amp versions. They can provide a 50 percent increase in amperage output vs. the stock originals. These robust alternators feature pure copper oversize diode rectifiers for outstanding durability. Higher output alternators provide more electrical support for aftermarket accessories such as light bars, winches, fridges, air compressors, inverters, large stereos, and more! Models are available for replacement or upgrade on many car, truck, van, and Jeep applications.
( 8 )
$349.00
—
$549.00
$296.65
—
$466.65
On Sale
Painless Performance 10-circuit race only switch and harness kits feature a relay for each fused circuit and 6 switch contour rocker panel to control it. Each wire is pneumatically terminated and pre-inserted into the fuse block and relay blocks. The fuse blocks are labeled for each circuit and are painted black and silkscreened for easy identification of switch functions. The panels can be roll bar or dash mounted. The harness wires are oversized and custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Electric fuel pump #1 * Electric fuel pump #2 * Fan relay activation power * Fused power source * Headlights * Ignition coil * Starting * Taillights
( 2 )
$529.99
$476.99
On Sale
MSD has raised the bar with their 6M-3L marine ignitions. They are fully-sealed units featuring single wiring connectors that make installation a breeze. Each ignition box is designed with three rotary dials and an LED display to simplify setting the cylinder select, start retard, and rev limiter--plug-in rev limiter chips and hard-to-read dials are a thing of the past. For diagnostic purposes, the LED displays can also be set to a "live" tachometer mode on V8s and will even display the battery voltage with just a quick turn of a knob. Boasting more features and higher spark energy than its predecessor, MSD 6M-3L marine ignitions are definitely performance upgrades your boat needs! Additional features and benefits include: * Large, easy to read LED display * Shift interrupt feature eases shifting * MSD's smoothest rev limiter yet, protecting parts and saving your engine * Records highest rpm the engine turned for last 20 minutes of run time * Easy setup of features with three rotary dials on the face of the unit * Built-in start retard adjustable in 0, 10, or 20 degree increments for quick, easy starts and extended starter life * LED display shows rev limit, highest rpm turned, cylinder select, start retard, battery voltage, and can be set to tach mode * Full delivery of spark energy and easy starting down to 6 V battery supply * Highly efficient, low-current draw for extended battery life * Fully potted housing to withstand demanding marine conditions * Sealed connector for clean wiring and trouble-free operation * Works on 4, 6, and 8 cylinder engines * Reverse polarity and overheat protection provide ultimate reliability * Can be triggered by magnetic pickup, amplifier, and points inputs
( 1 )
$599.95
$538.95
On Sale
Holley LS extended-length main engine harnesses are 22 in. longer than previous harnesses. Designed to fit most 24x and 58x LS engines from 1997-2012, they are a perfect fit for installers wanting to mount any Holley EFI ECU inside of the passenger compartment where it is away from the elements, and easy to access, such as on a roll bar or under the passenger seat. Notes: * Plug-and-play with Dominator, HP, Terminator X, and Terminator X Max ECUs * LS1/6 harness interfaces with 24x crank and 1x cam sensors * LS2/3/7 harness interfaces with 58x crank and 4x cam sensors
( 1 )
$672.95
$604.95
On Sale
Introducing the Superchips TrailDash 3 computer programmers for Jeep Wrangler and Gladiator! Built off the success of their TD2, the all-new TD3 offers a state-of-the-art display with a high-res 5 edge-to-edge full-color swipe screen. Using the latest monitoring technology, TD3 offers a clean and sharp display unlike anything on the market for Jeep owners today. The new, larger processor means faster tune loads, quicker response times, and the best user experience Superchips has ever offered. TD3 is also now Wi-Fi equipped, making internet updates a breeze. The new screen layout has been perfected to complement the look and feel of your Wrangler and Gladiator. The all-new CRAWL screen offers easy access to the data and off-road features you need most, like Sway Bar Disconnect, Axle Lockers, TPMS Disable, Rock Lock, Line Lock, and Engine Idle Up. Of course TD3 still offers tire size and gear ration adjustment—along with tried and true performance tuning for better power, torque, and mileage from your Jeep regardless the situation. You can also optimize your experience with the addition of a broad array of EAS accessories for extra power switches, back-up camera, and additional pressure or temperature sensors. Remember, 2015-21 Wranglers and Gladiators do require a PCM swap process and a unique set of steps required before tuning. It is extremely important you review and understand the steps required before you enjoy the tremendous power and functionality now available with TD3. Order the model recommended for your Jeep.
Not Yet Reviewed
$549.95
—
$699.00
$493.95
—
$628.95
On Sale
To power your off-road LED lighting, you will need a wiring harness to connect to your vehicle's battery. Diode Dynamics offers many different off-road light wiring harnesses designed for use with their Stage Series/SS Series light bars and pods. Stage Series lights without backlight functionality use a 2-pin harness, while lights with a backlight will use a 4-pin wiring harness. The harnesses connect directly to your vehicle's battery and allow you to power your off-road lighting. Each harness has a switch and uses high-capacity wiring, along with Deutsch DT connector(s) for simple plug-and-play installation. A waterproof fuse is included to safeguard the electrical systems in your light. Heavy-duty harnesses also include relay and an OEM auxiliary switch adapter to control lights for vehicles with a factory-installed Auxiliary Switch Bank. Set the "Stage" with the appropriate off-road lighting harnesses from Diode Dynamics.
Not Yet Reviewed
$39.95
—
$59.95
$31.96
—
$47.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
