Availability
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 452 )
$199.95
—
$218.95
$120.95
—
$137.95
On Sale
Enjoy better reliability and performance with FiTech Go-Spark ceramic spark plug wire sets. Each spark plug is preassembled from ceramic and carefully crafted with the proper end angles in mind, sparing you the hassle of custom trimming. Select the spark plug wire set designed for your application needs.
( 1 )
$120.00
—
$135.00
$108.00
—
$121.50
On Sale
ACCEL SuperStock 5000 Series spark plug wire sets are available in many sizes, styles, and colors to cover most any needs and vehicles. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response, and reduced emissions. The wires feature silicone construction and are rated for 450 to 550 degrees F (depending on the set). The wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Choose your set.
( 49 )
$40.82
—
$91.99
$22.45
—
$59.79
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
Not Yet Reviewed
$176.95
$115.95
On Sale
Keep your wires separated with Mr. Gasket wire looms and divider kits. Available in a variety of styles, materials, and finishes, these wire dividers fit 7 and 8mm wires with ease. Whether you're at the strip, cruising the streets, or sitting at a car show, Mr. Gasket wire looms and divider kits will be sure to keep your wires away from your headers and the engine compartment looking clean.
( 37 )
$16.95
—
$43.00
$9.32
—
$23.65
On Sale
Holley spark plug wires will energize your project! They offer a variety of styles and configurations for countless vehicles from the 1990s and up. The wires are available assembled or cut-to-fit. Whether you're looking for high-temperature protection, race, street, motorcycle, or stock replacement, Holley has the right spark plug wires to match your needs—and supply the juice you desire. Order the set recommended for your application.
( 13 )
$187.95
$122.95
On Sale
Mallory's Pro Wire spark plug wire sets are designed to meet the demands of every performance driving application. These wires feature a high-tech, carbon-impregnated fiber core to deliver energy while suppressing interference for on-board electronics. An 8mm silicone jacket repels water, oil, grease, and fuel, while withstanding temperatures of up to 500 degrees F.
( 8 )
$101.95
$66.95
On Sale
These custom wire loom kits from Mr. Gasket were designed to eliminate crossfiring and prevent heat damage to ignition wires, while giving them a neat and custom look. Made from heat-resistant black plastic, the wire divider clips to a chrome plated steel bracket. This can be attached to the valve cover, while the wire separator is placed into the ignition wires, keeping them equally spaced. These kits will accommodate 7 to 8mm ignition wires, and include two 4-hole wire separators, eight 2-hole wire dividers, and four chrome plated steel brackets.
( 2 )
$25.95
$14.27
On Sale
ACCEL universal single wire replacement kits are great for that one wire that got cut, burned, or broken. Each kit includes a 60 in. long, 8mm carbon/graphite core with boots and terminals for 90 degree male, 90 degree female, and straight points female towers. Service your spark plug wires with ACCEL.
( 6 )
$27.36
$15.05
On Sale
Don't guess! Mr. Gasket ignition wire markers eliminate firing order errors. These plastics markers are oil and grease-resistant, plus they are easy to read, with black numbers on white rings. Get the firing order right with Mr. Gasket ignition wire markers.
( 12 )
$11.05
$6.08
On Sale
Hot headers and crossfire can create havoc with your ignition wires. Mr. Gasket has the solution in these wire loom and separator kits! These high-quality kits are designed to lift and separate your wires, helping to keep them organized and protected from damage.
( 12 )
$12.95
$7.12
On Sale
Designed for competition and street use, Mr. Gasket's competition wire separator kits are the way to go. They help minimize crossfiring by keeping the ignition wires sufficiently separated from each other. Made from a heat-resistant plastic with or without the Mr. Gasket logo, these wire separators will accommodate 7 and 8mm ignition wires. They come available in a variety of colors and include two 2-wire, 3-wire, and 4-wire separators.
( 8 )
$10.03
$6.52
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1931 )
$172.95
$95.95
On Sale
ACCEL ProConnect spark plug wire sets meet or exceed OE/OES specifications and performance requirements. These cables match the original color and are designed to provide exact cable lengths for a perfect fit in today's tightly packed engine compartments. All ProConnect products undergo strict quality control testing procedures. The premium construction of ProConnect ignition wire sets includes OE/OES specified insulators, nipples, terminals and conductors; and cables fit tightly into spark plug wells to make installation easy. The result is a perfect connection and faster installations. Unlock the performance of your engine and improve operation of your ignition with a ProConnect spark plug wire set from ACCEL! Key features of ProConnect spark plug wire sets: * Carbon impregnated fiberglass core * Fiberglass braid for added strength * Conductive silicone for high temperature performance * Prestosil insulation for superior dielectric and heat performance * Reinforcing member for added strength * Silicone jackets withstand heat, cold, chemicals and moisture * KEVLAR® reinforced core * Ferrite impregnated layer * Wire winding for critical EMI/RFI noise suppression * Withstands extreme temperatures from -40 to 428 degrees F * Superior conductivity * EMI/RFI noise suppression
( 2 )
$35.82
—
$112.95
$19.70
—
$62.95
On Sale
ACCEL motorcycle 8mm S/S custom fit ignition wire sets feature extra-thick 8mm silicone jackets and silicon insulation to eliminate RFI interference that interrupts electronic ignitions. S/S wire can deliver up to five times more peak energy than "Screaming Eagle" wire sets and it can do so at high temperatures. The ultra-strong Aramid core and fiberglass braiding provide resistance to vibration and "wire stretch" for wire sets that are durable and reliable. S/S spark plug wire is available in custom fit sets that are preterminated and ready for a quick and easy installation. ACCEL motorcycle 8mm S/S custom fit ignition wire sets are recommended for use on all carbureted and fuel injected motorcycles and are available in 4 colors--blue, black, red, and yellow.
Not Yet Reviewed
$60.39
$33.21
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
