Availability
Showing In Stock Items. Show All 80 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1940 )
$112.95
—
$699.95
$95.95
—
$628.95
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 658 )
$22.25
—
$154.90
$20.02
—
$139.41
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 156 )
$71.60
—
$179.30
$64.44
—
$161.37
On Sale
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 438 )
$40.20
—
$91.20
$36.18
—
$82.08
On Sale
Taylor V8 vertical wire loom kits allow ignition wires to be run vertically along your valve cover and away from your exhaust manifold or header heat. These kits fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six vertical brackets
( 62 )
$40.20
—
$50.90
$36.18
—
$45.81
On Sale
Get some serious protection from exhaust heat by installing a set of Taylor Extreme Series Spiro-Pro spark plug wire sets. They're the finest high performance street and race wires available today. These replacement wires have maximum firepower without radio interference, and provide up to 10 times less resistance than standard resistor core wire. Spiro-Pros are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone distributor boots with grips; and ceramic spark plug boots that can withstand up to 2,000 degrees F. Taylor Extreme Series Spiro-Pro spark plug wire sets are available in multiple terminal and boot end options, as well as your choice of colors.
( 26 )
$149.05
—
$160.20
$134.14
—
$144.18
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 641 )
$22.25
—
$226.50
$20.02
—
$203.85
On Sale
MSD 8.5mm Super Conductor wire has a special helically wound core that has just 40 to 50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. A tough 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.
( 30 )
$39.50
—
$678.95
$35.55
—
$610.95
On Sale
Manufacturer Rebate
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 297 )
$29.80
—
$257.25
$26.82
—
$231.52
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 129 )
$10.68
—
$330.95
$9.61
—
$297.85
On Sale
Organize your spark plug wires with these Taylor clamp-style wire separators. Made from tough non-conductive 6/6 nylon, these separators can withstand temperatures of up to 400 degrees without melting and they won't distort, crack, or fade.
( 169 )
$17.25
—
$22.80
$15.52
—
$20.52
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 137 )
$64.60
—
$79.55
$58.14
—
$71.60
On Sale
To take advantage of the programmable Digital-7's Individual Cylinder Management system, a synchronization pickup must be incorporated so the ignition knows exactly which cylinder is firing. With this information, the MSD can begin your unique timing sequence through each cylinder! MSD offers two ways to accomplish this: Spark plug wire sync kits and cam sync pickups.
( 3 )
$178.95
$161.05
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$14.42
—
$274.95
$12.98
—
$247.45
On Sale
These sets of 8mm 100 percent pure silicone insulation (designed to withstand over 600 degrees F) with a fiberglass-reinforced jacket and double spring locking spark plug terminals provide a firm grip on plugs. They're offered in two styles--a popular resistor core, which has 40 percent less resistance (and more firepower) than most resistor conductors, and a tinned copper weld wire core, which is for racing applications and where RFI is not a concern.
( 98 )
$22.80
—
$171.30
$20.52
—
$154.17
On Sale
Simplify your ignition system installation. MSD replacement coil wires are used when attaching an MSD Blaster coil to an their HEI dust cover or distributor. The pre-assembled wires include two 90 degree boots and two dual crimp terminals.
( 95 )
$29.81
—
$32.91
$26.83
—
$29.62
On Sale
These MSD spark plug wire bulk rolls are available in 6, 25,100, and 300 ft. rolls. The heli-core wire comes in blue, while the super conductor wire comes in red or black.
( 12 )
$39.50
—
$699.95
$35.55
—
$628.95
On Sale
Taylor Spiro-Pro Race-Fit Spiro-Wound core spark plug wire sets outperform the competition in both looks and performance at a price that you can afford. According to Taylor, Spiro-Pro is simply the best high performance 8mm wire you can buy and is a perfect choice for your race or street car. Their Spiro-Wound core is designed for use when RFI suppression is required for today's complex multiple spark discharge systems. Spiro-Pro features two layers of 100 percent silicone to withstand temperatures of up to 600 degrees F without the need for additional sleeving. Each wire is preterminated to a specific length—and features Taylor's all-silicone Pro Boots with double spring-locking spark plug terminals. They're available in a choice of colors. Order the set and options designed for your vehicle and engine application.
( 109 )
$105.00
—
$179.30
$94.50
—
$161.37
On Sale
Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.
( 222 )
$41.25
—
$66.70
$37.12
—
$60.03
On Sale
Taylor offers these 8mm silicone spark plug boot and terminal kits for custom installs and repairs. They feature vibration-proof, spring-lock spark plug terminals, along with high-temperature boots.
( 122 )
$12.90
—
$33.60
$11.61
—
$30.24
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 456 )
$199.95
—
$218.95
$120.95
—
$137.95
On Sale
Taylor wire-core spark plug wire rolls give you 30 or 100 ft. of spark plug wire. The 8mm wire-core rolls are available in red, blue, black, yellow, purple, teal, white, orange, pink, and hot lime. The 409 wire-core rolls are available in red, blue, or black.
( 9 )
$61.95
—
$151.15
$55.76
—
$136.04
On Sale
Designed exclusively for extreme-duty racing conditions, it's hard not to like all of the features in MSD's new Professional Racing Series spark plug wire boot and terminal kits. The boots feature a proprietary blend of materials to withstand much higher temperatures over a longer period of time than standard boots.
( 42 )
$39.50
—
$46.09
$35.55
—
$41.48
On Sale
Outshine the competition in both looks and performance with Taylor Spiro-Pro universal spark plug wire sets. Order the model that's compatible with your engine application. Features include: * 100 percent silicone inner core and outer jacket * Spiro-wound core consists of highly conductive resistor conductor spiral with stainless steel wire, covered with a fluorocarbon conductive material * More firepower to the spark plugs than OEM resistor core wires, and up to 10 times less resistance than standard resistor core wires * Eliminate radio frequency interference (RFI) * Highest temperature-rated wire on the market (600 degrees F) without the need for additional sleeving * Taylor's exclusive low-profile, vibration-proof, 100 percent silicone Pro Boot with grips * Double spring-locking spark plug terminals * Choice of many vibrant colors
( 2 )
$24.90
—
$94.40
$22.41
—
$84.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
