Availability
Showing In Stock Items. Show All 12 Items.
On Sale
Taylor V8 vertical wire loom kits allow ignition wires to be run vertically along your valve cover and away from your exhaust manifold or header heat. These kits fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six vertical brackets
( 63 )
$40.20
—
$50.90
$36.18
—
$45.81
On Sale
PerTronix Flame-Thrower Ceramic Hi-Temp universal spark plug boots protect against direct heat, withstanding up to 2,000 degrees F. These universal boots provide the very best protection for applications with tight fitting headers or exhaust manifolds, and they fit typical 8mm spark plug wires. Pertronix offers the Flame-Thrower Ceramic Hi-Temp boots in several boot angle configurations individually and in sets of 8 to retrofit an entire spark plug wire set. Each kit includes pure silicone plug(s), wire bushing(s), spark plug terminal(s), and high-temperature ceramic boot(s).
( 36 )
$17.25
—
$123.60
$15.52
—
$111.24
On Sale
These Taylor V8 horizontal wire loom kits allow ignition wires to be run horizontally along your valve cover and away from your exhaust manifold or header heat. They fit valve covers with a perimeter-style bolt pattern and external fasteners. Kits include: * Two each 2-wire and 3-wire separators * Two each 4-wire separators * Six horizontal brackets
( 31 )
$50.90
$45.81
On Sale
Keep your wires tidy and away from heat with Taylor! Taylor V6 horizontal wire loom kits allow you to run your spark plug wires horizontally alongside your valve covers, routing them away from the heat of your exhaust manifold and headers. These universal-style wire separator kits are designed to fit all V6 ignition wire applications.
( 1 )
$28.10
$25.29
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1972 )
$118.95
—
$167.95
$107.05
—
$151.15
On Sale
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 133 )
$63.25
—
$84.62
$47.44
—
$71.15
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$72.10
$64.89
On Sale
MSD 8.5 mm Race Tailored Super Conductor Wire Sets are designed to specifically fit race engines equipped with headers or MSD distributors. They feature wires that are custom cut to route behind the block, under the headers, and to the spark plugs. This routing gives the engine an extra clean appearance as well as protecting the wires from making contact with the engine. The wires have a special helically-wound core that has just 40-50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 feet of tightly wound copper for superior conductivity. A tough 8.5 mm synthetic/silicone jacket over an extra heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, stainless steel terminals feature snap locks to assure a secure fit.
( 13 )
$210.95
$116.95
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$79.09
$71.15
On Sale
Taylor's Pro Wire 8mm TCW core spark plug wire sets beat the competition, both in looks and performance. They're 100 percent pure silicone insulated with a fiberglass reinforced jacket. The TCW core conductor is designed for racing applications where RFI is not a concern and is an excellent choice for Magneto, point type, and non-electronic ignition applications. Available in four colors, these wires feature Taylor's exclusive low profile, 100 percent silicone Pro Boot with finger grips and vibration proof spring lock terminals, and are designed to withstand over 600 degrees F when underhood temperatures are high.
Not Yet Reviewed
$105.00
$94.50
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 649 )
$226.50
$203.85
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
