Availability
Showing In Stock Items. Show All 25 Items.
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$70.79
$63.75
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
On Sale
If your turn signals have stopped working, restore function with replacement flasher units from Crown Automotive. They will complete the circuit, which allows the turn signal switch to supply current to resistive wires, and continuing on to the turn signal lights. Make your vehicle safer for the road with Crown flashers.
Not Yet Reviewed
$63.99
$57.59
On Sale
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 4 )
$80.49
$72.45
On Sale
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 72 )
$106.95
$96.25
On Sale
PerTronix Flame-Thrower III ignition coils were developed for use with the new Ignitor III electronics. They feature an ultra-low resistance of 0.32 ohms with 45,000 V. The coils are engineered to charge to peak current typically 30-70 percent faster than other ignition coils. This means that maximum spark energy is sustained to higher engine RPM. The economical units are available in a black or chrome finish.
( 119 )
$64.15
—
$75.85
$57.74
—
$68.26
On Sale
Don't take chances with old, questionable, or faulty turn signal switches that can be a danger to you and others. Scott Drake replacement turn signal indicator switches are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These units include wiring and are available for a variety of classic makes and models. Trust your vehicle's electrical system needs to Scott Drake.
( 89 )
$92.35
—
$117.95
$50.79
—
$106.15
On Sale
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
$97.19
On Sale
When you need to replace your worn-out or burned cables, MSD offers all of the cables you will ever need. You could also use these cables to connect your MSD unit to your distributor.
( 68 )
$59.25
—
$65.89
$53.35
—
$59.35
On Sale
Holley ECU mounting brackets allow you to comfortably install either the Dominator ECU, Holley HP, Terminator X, or Terminator X-MAX under your Mustang's front passenger seat. They're designed to work with stock seats and seat tracks (modified/race seats may or may not accommodate them). You simply route all your ECU harnesses through the firewall--properly route the wires, install the unit followed by the ECU, and then reconnect your wires and go! Use your laptop to fine-tune the ECU without popping the hood and protect it from engine bay heat with Holley ECU mounting brackets. Order the brackets recommended for your application.
( 3 )
$110.95
$99.85
On Sale
MSD high-current relays are what you need to activate accessories that draw high current. These relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. They are available in single and dual pole/throw 30 amp/12 VDC units to suit your automotive needs.
( 15 )
$59.25
$53.35
On Sale
ACCEL Mopar Remote Super Coils provide increased performance for Dodge trucks and Jeeps. You get quicker starts, improved idle, crisp throttle response, and higher top rpm power. These coils are compatible with Mopar J-TEC computer-controlled ignitions and are direct bolt-in units.
( 102 )
$78.85
$59.14
On Sale
In many performance applications, such as off-road, drag race, marine, and oval track racing, strong vibration forces can be transmitted through the chassis to your MSD ignition units and coils. These MSD vibration mounts are designed to help protect your ignition box or ignition coil from extreme vibration and the damage associated with it.
( 62 )
$59.25
$53.35
On Sale
Edge OBDII Pass-Through Signal Splitters allow two products to be simultaneously plugged into the OBDII port—such as an Edge Insight monitor unit and another product, including (but not limited to) power running boards or other potential OBDII powered products. These new OBDII splitters are fully populated with a 16-pin pass-through, pinned connector. Products may vary on what can be running at the same time. Not recommend for use with two monitors or tuners plugged in at the same time.
Not Yet Reviewed
$61.65
$55.45
On Sale
Clearance
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$55.99
—
$121.99
$50.39
—
$109.79
On Sale
Aeromotive VaporWorx fuel pressure sensors are exclusively for use with all VaporWorx PWM (Pulse Width Modification) kits that require a fuel pressure sensor. Efficient energy management is one of the main goals in the automotive industry, regulating actuators by (PWM), which is a widespread means of improving efficiency. PWM fuel pressure sensors are used to precisely control the speed of a fuel pump by rapidly turning the power on and off in varying durations, allowing the engine to receive the exact amount of fuel needed based on driving conditions. This ultimately improves fuel efficiency and reduces unnecessary wear on the pump by only running it at full power when required; essentially acting like a "throttle" for the fuel pump. Select the sensor for your application. Key points of PWM fuel pressure sensors: * Dynamic fuel pressure control—unlike traditional systems, PWM allows the fuel pressure to adjust rapidly depending on engine load, throttle position, and other factors, ensuring optimal fuel delivery at all times * Reduced power consumption—by only running the fuel pump at the necessary speed, PWM significantly reduces the power draw from the battery, improving fuel economy * Lower noise levels—operating the fuel pump at variable speeds with PWM helps minimize noise generated by the pump * Returnless fuel systems—PWM is often used in modern "returnless" fuel systems, where the excess fuel is not returned to the tank, simplifying fuel system design How it works: -- Signal from the ECU: The engine control unit (ECU) sends a PWM signal to the fuel pump controller, which determines the duty cycle (the ratio of "on" time to "off" time) based on engine conditions -- Pump speed control: The controller uses the PWM signal to rapidly switch the power to the fuel pump, effectively adjusting its speed -- Feedback loop: A fuel pressure sensor monitors the actual fuel pressure and sends this information back to the ECU, allowing for fine-tuning of the PWM signal to maintain desired pressure
Not Yet Reviewed
$68.95
$62.06
On Sale
Convert your OEM-style breaker points and condenser to the more reliable Unilite ignition from Mallory. These self-contained units have no moving parts to wear out, so they provide many years of trouble-free service. Simply replace the points with the Unilite module, which consists of a photo coupler, signal processor, and power switch. Each time the shutter wheel stops the infrared light from reaching the photo coupler, the electronic circuitry energizes the ignition coil. When the shutter wheel allows the light to reach the photo coupler, the stored energy in the coil discharges. These kits can drive both OEM and high-performance ignition coils, and are designed for 12 V negative ground systems.
( 6 )
$176.95
$97.95
On Sale
Racepak Smartwire to Switch Panel Cables are the quickest and easiest way to connect a switch panel, switch module, or keypad to the Racepak Smartwire unit. Ranging from 6 in. to 10 ft., these cables are the perfect choice for almost any application from drag racing to off-road and even pulling! Connect your remote module with Racepak Smartwire to switch panels today!
Not Yet Reviewed
$103.95
—
$109.95
$57.95
—
$60.95
On Sale
Don't put yourself or others in danger with a malfunctioning turn signal switch. Crown Automotive multi-function switches are designed to activate various accessories, such as your windshield wipers, headlights, fog lights, and turn signals—all in one convenient lever unit. These replacement switches are made to meet or exceed OE specifications for fit and function.
( 3 )
$58.99
—
$100.99
$53.09
—
$95.94
On Sale
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$55.99
—
$76.99
$50.39
—
$69.29
On Sale
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$55.99
—
$116.99
$50.39
—
$105.29
On Sale
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$65.99
—
$73.99
$59.39
—
$66.59
On Sale
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 81 )
$64.97
$58.47
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
