Availability
Showing In Stock Items. Show All 31 Items.
On Sale
Looking for a good cap and rotor for your HEI distributor? These Pertronix caps and rotors are made from a high-dielectric, 60 kV-rated alkyd molding compound to minimize crossfire and "arc-thru." They include nylon rotor hold-down screws, a low-resistance coil brush for a more efficient spark, and brass terminals for a long life.
( 11 )
$45.60
—
$46.15
$41.04
—
$41.54
On Sale
ACCEL adjustable vacuum advance canisters for GM HEI are designed to give you instant horsepower and throttle response. Adjustable vacuum advance chambers permit infinite settings for both the amount and rate of advance. The advance chambers include an adjustment wrench and an instruction guide. To optimize your engine's timing curve, you need ACCEL adjustable vacuum advance chambers for GM HEI.
( 22 )
$52.69
$47.45
On Sale
PerTronix Flame-Thrower HEI dust covers are made from quality materials to provide increased space and help your coil run cooler. They're designed for PerTronix Flame-Thrower distributors to help clean up the look of any HEI system.
Not Yet Reviewed
$34.15
$30.74
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$49.95
—
$61.69
$33.93
—
$49.05
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$53.75
—
$57.49
$48.35
—
$51.75
On Sale
Your distributor will need upkeep to run at top performance. MSD Street Fire cap and rotor kits can help maintain its optimum operation. Manufactured with brass terminals and a heavy-duty rotor, these MSD kits offer big performance at a not-so-big price. MSD Street Fire cap and rotor kits are available for several GM and Ford applications. So, if you're in a budget frame of mind, choose quality-built MSD Street Fire cap and rotor kits.
( 138 )
$47.77
—
$52.69
$42.99
—
$47.45
On Sale
ACCEL performance distributor cap and rotor kits offer superior protection from damaging misfires. High-output racing ignition systems place severe demands on these components, and that's why ACCEL makes sure these kits provide optimal shielding against damage. The ACCEL performance distributor cap and rotor kit designed for your application will defend your parts against high voltage, surges of spark current, and high temperatures, all of which can liquify run-of-the-mill cap and rotor's molded parts! More product features include: * High-quality compound caps ensure stability * Corrosion-resistant inserts help provide high-sparking energy flow
( 70 )
$45.98
—
$53.09
$29.20
—
$46.55
On Sale
These MSD advance kits are the same kits that come with your MSD distributor. The kits include the needed components to make your distributor perform like it did when it was brand new.
( 133 )
$53.05
$47.75
On Sale
ACCEL heavy-duty distributor cap and rotor kits offer superior protection from "arc-thru" and crossfire. These caps are stress-relieved at the molding to ensure stability and feature a 60k volt-rated alkyd molding compound. Corrosion-resistant brass inserts and steel rotor springs provide high-spark energy flow for the ACCEL heavy-duty distributor cap and rotor kit designed to fit your application.
( 44 )
$52.69
—
$59.25
$34.25
—
$53.35
On Sale
When it's time for a tune-up, PerTronix offers quality distributor caps to replace your worn-out original. Why take chances with old, questionable, or faulty ignition components that can leave you stranded. PerTronix distributor caps are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's ignition system needs to PerTronix; order the model and options best suited for your vehicle.
( 35 )
$40.20
—
$56.40
$36.18
—
$50.76
On Sale
ACCEL distributor caps are the best way to help improve ignition. The compression-molded caps are stress-relieved immediately after molding to ensure stability of the 60,000 V alkyd high-performance compound. Brass inserts provide for high spark energy flow. These heavy-duty ACCEL distributor caps provide maximum energy to your engine. They're available in a variety of styles for a wide range of vehicle application.
( 49 )
$32.85
$29.57
On Sale
Servicing your billet or cast Flame-Thrower? PerTronix distributor cap and rotor kits are available to help you perform routine maintenance and make repairs. The caps are high-dielectric strength compound to minimize crossfire and "arc-through". They are available in red or black with male or female brass terminals and premium rotors with brass contacts. Restore power with PerTronix cap and rotor kits.
( 52 )
$40.20
$36.18
On Sale
PerTronix adjustable vacuum advance canisters allow you to optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Replacement models are available for different distributor applications, such as GM HEI-type or billet models from PerTronix.
( 23 )
$33.60
—
$34.15
$30.24
—
$30.74
On Sale
These MSD vacuum advance mechanisms are designed to replace the vacuum advance chamber on the MSD HEI distributor. They are made of steel and feature cadmium plating for maximum durability.
( 7 )
$39.50
$35.55
On Sale
PerTronix Flame-Thrower HEI ignition module wiring harnesses feature a premium-quality wire and capacitor to ensure good connections and static-free operation. They include pre-terminated ends that can be installed in minutes with no cutting or modification. Additional notes: * Flame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7,500 rpm. That's nearly 3,000 rpm higher than most stock HEI distributors. Race HEI distributors feature an electronic HEI distributor module and 50,000 V coil combination that optimizes spark energy and peak current to the spark plug in the 6,000 to 8,500 rpm range. * PerTronix 4-pin wire harness/capacitor for all Flame-Thrower HEI distributors and GM 8-cylinder HEI distributors (P/N PNX-D9007)
( 13 )
$33.60
$30.24
On Sale
These PerTronix distributor gears are designed to fit your PerTronix Flame-Thrower distributors with no modifications. They are available in your choice of steel or bronze and come in different shaft diameters for your specific engine application. Keep your distributor spinning the right way with one of these PerTronix distributor gears.
( 8 )
$50.35
$45.32
On Sale
Pertronix Flame-Thrower EST distributor caps are made from high performance 60 KV rated alkyd molding compound for superior protection from "arc-through" and crossfire. They are designed to be replacements for your Flame-Thrower distributor.
Not Yet Reviewed
$40.20
$36.18
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$41.78
$37.60
On Sale
These spark plug and coil wire repair kits from Taylor are easy replacements for damaged individual wires. They're available for an assortment of wire types in a variety of colors and sizes to suit your application.
( 22 )
$21.10
—
$35.85
$18.99
—
$32.26
On Sale
These distributor and coil boot and terminal kits from Taylor are perfect for engine builders or for people doing repairs and maintenance. Kits are available with boots only, terminals only, and are also offered with both boots and terminals. Taylor makes it simple and convenient to get just what you need for your service, repair, or custom setup!
( 118 )
$33.60
$30.24
On Sale
Simplify your ignition system installation. MSD replacement coil wires are used when attaching an MSD Blaster coil to an their HEI dust cover or distributor. The pre-assembled wires include two 90 degree boots and two dual crimp terminals.
( 96 )
$29.81
—
$32.91
$26.83
—
$29.62
On Sale
MSD designed these firewall feed-thrus to prevent voltage leaks in passenger compartment mounted coil applications. Made from Rynite and nylon, they provide a 1/2 in. of insulation to ensure that the coil's spark reaches the distributor. They mount in a 1 in. diameter hole directly to the firewall and have high tension towers on each side, connected through a brass rod for full spark transfer.
( 26 )
$29.83
$26.85
On Sale
Taylor coil wire kits include all of the terminals, boots, and spark plug wire you need to hook up just about any ignition coil. They include both male and female terminals for the distributor end, as well as for the coil attachment.
( 93 )
$24.90
$22.41
On Sale
PerTronix offers a wide range of parts and accessories for ignition systems—including these ignition wire towers. The replacement spark plug terminals are designed for Ignitor and Ignitor II kits. The original Ignitor module is ideal for restorations. Ignitor module kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required, maintaining a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points—and will cover automotive, marine, industrial, and agriculture applications.
Not Yet Reviewed
$28.10
$25.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
