Availability
Showing In Stock Items. Show All 9 Items.
On Sale
SCT Performance blank dropship-only computer modules are shipped to you blank, so that your custom tuning provider can install the programming you need for your engine.
( 2 )
$220.00
$178.99
On Sale
Bully Dog sensor docking stations offer an unparalleled glimpse into the comparative health of your vehicle. These accessories for the GT and Watch Dog product lines make it easy to install aftermarket automotive sensors onto your modern vehicle, and then display those specific values. They support a multitude of different measuring device types, including pressure (oil and/or boost), speed, and temperature sensors (exhaust, transmission and/or air intake). Bully Dog sensor docking stations are a superb, easy way for you to instantly check on the well-being of your vehicle.
( 1 )
$156.99
—
$171.99
$141.29
—
$152.99
On Sale
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$141.71
—
$284.96
$127.54
—
$256.46
On Sale
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 109 )
$141.71
—
$292.46
$127.54
—
$263.21
On Sale
Are you looking for a new performance chip but aren't sure which one to get? Now you don't have to worry--JET has taken away the guesswork with their Six Pack performance chips. They allow the driver to select from six different levels of performance with the push of a button. They include programs for economy, towing, Stage 1 and Stage 2 performance, valet mode, and security.
( 10 )
$251.96
—
$314.96
$226.76
—
$283.46
On Sale
Now you can monitor your exhaust gas temperature through your SCT device instrumentation system! These SCT exhaust gas temperature sensor kits allow you to monitor your exhaust gas temperature so you can tune for maximum performance. Product features: * Plug and play with SCT's devices * Works with SCT device warning lights * Easy installation * Monitor your vehicle's EGT temps
( 3 )
$166.99
$151.99
On Sale
These performance modules from JET will improve the performance of your Ford car or truck with very little work. Perfect for vehicles with little or no modifications, they're programmed for power increases under hard throttle conditions such as towing and wide-open throttle. They offer a full range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno-tested to ensure the most possible power without affecting drivability or fuel economy.
( 46 )
$284.96
$256.46
On Sale
Edge EAS Shift-On-The-Fly (SOTF) kits permit you to change power levels with the touch of a button utilizing your existing Insight CS2 or CTS2. Other tuning companies utilize a voltage signal to prompt a custom tune level change, the Edge EAS SOTF accessory kits allow your Insight monitor to produce voltage signals between 1 to 5 V, just like a regular switch does, allowing for tune changes—but without the need for a separate switch! Here's how the EAS SOTF kits work: * The EAS shift-on-the-fly accessory, when connected to your insight CTS2, will control your tune levels for vehicles requiring a switch to control the power levels * Switching occurs by changing the voltages between 1 V, 2 V, 3 V, 4 V, 5 V (most custom-tuned vehicles run within these parameters) * Wire or plug the switch in, just as you would your normal Shift-On-The-Fly or Driver Selectable Tuning (DST) switch, then flash the tune into your vehicle that enables the SOTF/DST functions * Enjoy changing your power levels right through Insight CS2 or CTS2 screen (CS2 and CTS2 monitors sold separately)
Not Yet Reviewed
$274.95
—
$299.95
$199.95
On Sale
AEM Mini Master battery management systems are comprised of three components: 1. VCU 2. BMS-18 Mini Master 3. BMS-18 Satellite(s) The BMS is implemented as two different module types: the Mini Master and the Satellite. Each module is capable of measuring up to 18 cells and three temperatures (thermistors), but the Master also contains the CAN communication interface and J1772 charging specific connections needed for each battery pack. The VCU communicates with the BMS via the Mini Master module and all battery packs need at least one Mini Master unit. The Satellites expand the capability of the Master by an additional 18 cells and three thermistors per additional Satellite connected. The Satellite modules are connected to their Master via a high-speed serial interface (isoSPI) that allows additional units to be daisy chained together, adding as many Satellites as necessary for the battery pack configuration. The VCU is responsible for all BMS control logic. All setup and calibration items can be modified using the AEMCal user interface. Features: * Add-on expansion for VCU products, enabling the VCU's battery management features * Distributed BMS architecture allows for easy support of distributed battery packs * Interfaces with J1772 charge port to automatically power up vehicle when charge plug is connected * Up to 16 BMS18 Satellites can be connected to a single BMS18 Mini Master to support up to 1,200 V systems
Not Yet Reviewed
$284.95
$156.95
Modal Header