Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
9 Results Found For "end"
Showing In Stock Items. Show All 16 Items.
Painless Performance 21-Circuit Direct-Fit Jeep CJ Harnesses
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 28 )
$899.99
MSD Ultra 7AL Ignition Boxes
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
( 1 )
$819.95
XS Power 16 V Lithium Racing Battery Combo Kits
In a never ending effort to provide the highest energy density chemistry in the industry, XS Power 16 V Lithium racing battery and charger combos pair safe, maintenance-free batteries with perfectly matched high-frequency IntelliChargers for the ultimate power pack. These combos also include battery terminal hardware and instructions to get you up and running as fast as possible with as much energy as possible. When you are pushing to power the impossible, you need the non-stop capabilities of the XS Power 16 V Lithium racing battery and charger combo best suited for your application.
Not Yet Reviewed
$929.99
On Sale
Summit Racing™ Reproduction Wiring Harnesses
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 58 )
$1,003.99
$774.99
—
$951.99
MSD DIS-4 Plus Digital Ignitions
MSD DIS-4 Plus digital ignitions improve the output of your late model distributorless ignition system (DIS). The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top-end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 Plus ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.
( 1 )
$972.95
Granatelli Motor Sports Ignition System Combo Kits
Granatelli Motor Sports ignition system combo kits feature Granatelli's patented 0 ohm wires with extremely low resistance that maintain very high noise suppression. They transmit the full electrical energy of the ignition source to the spark plugs. The end result is increased horsepower, torque, and fuel economy. Order the kit recommended for your vehicle and engine application. Product details: * Direct replacements exceed OEM specifications; OBD-II computer safe * Increase power to the spark plugs up to 400 percent over stock * 0 ohm resistance, no RFI/EMI interference thanks to patented protector ring * Works with all street and race fuel injection systems * Solid stainless steel connector cables and snap-lock spark plug connectors * High-temperature silicone boots; 8mm jackets with fiberglass-reinforced braid resist temperatures up to 500 degrees F * Ideal for use with aftermarket headers or turbocharger systems * Includes all necessary hardware
Not Yet Reviewed
$878.75
Haltech Elite Premium Universal Wire-In Harnesses
Haltech's Elite Premium universal wire-in harness is ideal for dedicated race cars, engine swaps, and custom wiring jobs. Each harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labelled wires match the detailed wiring diagram for a confusion-free construction process * The wiring diagram is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Includes: Firewall grommet, molded 6 power circuit HalTech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits
Not Yet Reviewed
$940.00
MSD 6 HVC-L CD Ignitions
The MSD 6 HVC-L CD ignitions are powerful new systems designed primarily for Circle Track and events that require high rpm for a long duration. Only the best high-end components have been put into this exclusive design for more output energy and voltage, with less current draw. Each transformer is hand-wound for more power at lower temperatures. Field Effect transistors accept higher loads than standard transistors. A faster, more efficient Integrated Gate Bi-Polar transistor improves coil saturation. They feature an optimum heat sink that gives increased heat dissipation, large capacitors that give you full-strength sparks at any rpm, a rev limiter, and a clear silicone casing that protects circuits from vibration. MSD wired them with NASCAR-mandated, 6-pin, weathertight connectors and a special 4-pin connector plug that connects directly into MSD's Soft Touch rev control, which is available separately.
( 3 )
$819.95
—
$921.95
Standard Motor Blind Spot Detection Sensors
Standard Motor blind spot detection sensors are direct-fit OE replacements to ensure proper fit and function. They monitor the sides of your vehicle to notify the driver of unseen obstacles—helping you to avoid accidents, minor rear-end collisions, and inaccurate parking, as well as making safer lane changes on the highway. These blind spot detectors have a plug-and-play design for easy installation. Order the model recommended for your vehicle application.
( 1 )
$770.99
—
$937.99
