Availability
Edelbrock TC transmission controllers are offered as a standalone system to work with Pro Flo 4, most aftermarket fuel injection systems and carbureted applications utilizing a TPS sensor. Features: * Transmission control over shift points, firmness, speed, torque converter lock up, shift table, speedometer calibration and line pressure * Edelbrock TC Tuner calibration app (available for both Android and Apple devices) and optional 7 in. touchscreen Bluetooth tablet for setup, adjustment and visual display * Easy install with compact housing and clean-look wiring harness * Includes base calibrations for a plug-and-play setup * Compatible with carbureted applications utilizing a standalone throttle position sensor * CAN bus communication for functionality with all Pro-Flo 4 systems and most aftermarket EFI systems * Also, allows you to change the final drive ratio, tire diameter, and transfer case ratio
( 4 )
$864.95
—
$910.95
Manufacturer Rebate
Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
Not Yet Reviewed
$824.99
FAST XR-1A high-output ignition coils are designed specifically for high-compression naturally aspirated, boosted, or nitrous-equipped applications making more than 1,000 hp. This horsepower range is far beyond the capabilities of OE coils. The spark energy of the FAST coils is comparable to CDI (capacitive discharge ignition) systems without the need to convert. The smart coil design also requires no ignitor module. XR-1A high-output ignition coils deliver up to 44,000 volts, 103mJ of energy, and support a maximum of 19 amps of current and 17 volts. They're designed to work with all OEM equipment, as well as FAST products that support coil-near-plug applications such as the XIM and EZ-LS ignition controllers. Order the coils for your application individually or in a set of eight.
Not Yet Reviewed
$773.95
—
$843.95
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$830.99
—
$955.99
On Sale
Fear not, fuel injection fans! FAST has just made it easier than ever to convert your engine from a carburetor to fuel injection, using these FAST EZ-EFI Self-Tuning engine management systems. The most important feature is the self-tuning operation that does not require chasing components, expert tuning experience, or a laptop computer to tune. Simply hook them up, answer the basic Wizard setup questions on the included hand-held display, and the systems truly tune themselves. FAST EZ-EFI Self-Tuning systems include a wide-band oxygen sensor and wiring harness.
( 3 )
$801.95
Summit Racing™ Direct-Fit AutoFuse Restoration Series dash harnesses and accessory kits allow you to maintain the plug-and-play functionality of the original factory-type harnesses while converting the entire fuse block from glass fuses to an updated and modern AutoFuse Series ATO-type fuse block. Our new kits offer restorers the flexibility to add additional power circuits, without the installation problems normally associated with this type of fuse box update. No cutting, modifying, or altering is required just plug it in and turn it on. Compatible with all original or remaining harnesses in the car. Choose the desired kit designed for your vehicle.
( 1 )
$758.99
—
$874.99
Sierra Marine alternator conversion kits will allow you to convert an aluminum block Merc engine with stator charging system and water-cooled voltage regulator to alternator system. Kits include new alternator, mounting brackets, pulley, wiring, hardware, and instructions. Sierra provides premium-quality aftermarket replacements for over 6,000 marine parts, tools, and components. Sierra Marine products are engineered to meet or exceed OEM standards and stand up in harsh marine environments. Note: Fuse kit P/N:18-8220 (sold separately) is required on engines with a Delco starter. Prestolite starters with remote solenoid do not require fuse kit.
Not Yet Reviewed
$896.99
Standard Motor alternator rectifiers are available for thousands of vehicle applications. These units in your assembly convert the AC (alternating current) that alternators produce into DC (direct current) for use by the vehicle's battery and electrical system. Harsh power demands on the rectifier can cause alternator diodes to fail. At that point, you may notice frequent engine stalls or dimming lights. Often you can simply replace the rectifier, not the entire alternator. Order the model designed for your specific vehicle application.
Not Yet Reviewed
$841.99
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,099.95
$988.95
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$884.99
Compu-Fire Gen 3 high performance starters provide significantly increased cranking power over your stock starter. They are available in chrome or black finishes. Select the starter designed for your motorcycle.
Not Yet Reviewed
$804.20
Now you can have a balanced performance ignition system that is designed to make the most horsepower without mixing and matching components. ACCEL Motorcycle Super Single Fire ignition systems are complete bolt-on systems that are designed to work together to produce an adjustable ignition that outperforms others. Each Super System includes the adjustable ignition module, a Single Fire Super Coil, ACCEL high performance U-groove spark plugs, and ACCEL black 8.8 performance spark plug wires. These systems are easily installed and simply adjusted with switches on the module to produce the performance to match your machine.
Not Yet Reviewed
$949.95
Compu-Fire 1.6kW starters provide increased cranking power over your stock starter. They are available in chrome or black finishes. Select the one desired for your Harley® motorcycle.
Not Yet Reviewed
$770.25
Compu-Fire Gen 3 high performance, high-speed starters provide significantly increased cranking power with reduced amperage draw. They are available in chrome or black finishes. Select the starter designed for your motorcycle.
Not Yet Reviewed
$804.20
American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.
( 28 )
$861.65
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$829.99
Bosch replacement alternators and generators are designed to withstand the excessive heat and electrical demands in harsh environments--delivering outstanding performance and a lengthy lifespan. Because they're built with all-new quality components, these alternators and generators have never been exposed to the conditions that rebuilt versions have. And Bosch replacement alternators and generators are equal or better in fit and performance than their OE counterparts. A variety of sizes are available for applications ranging from automotive to agricultural and industrial machinery.
( 3 )
$751.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$836.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
