Availability
On Sale
If you run a blower, turbo, or even a naturally aspirated engine, MSD's Boost Timing Masters allow you to run at the edge of detonation for maximum power output. They can prevent detonation by automatically retarding the timing as your manifold pressure increases. The secret lies in a boost pressure sensor that's inside MSD's solid-state control box. The sensor reads boost pressure through a 1/8 in. vacuum hose attached to a boost pressure source. The result gives you peak power without harmful detonation. A dash-mounted control knob allows you to dial in the retard from 1 to 3 degrees per pound of boost pressure, up to a maximum retard of 15 degrees. Vacuum tubing is not included. These units must be used with an MSD 6, 7 or 8 series ignition.
( 6 )
$926.95
$833.95
On Sale
The 6-Mod Ignition Controller was originally developed for the 4.6 and 5.4-liter modular motors that were fed through a carburetor rather than an electronic fuel injection system. However, with the useful options that the 6-Mod provides, such as two rev limits, a step retard and easy control over the timing, the EFI people wanted a way to take advantage of the adjustment. The harness kit provides a splice-free installation of the MSD 6-Mod Controller to factory equipped EFI vehicles making installation a snap. All of the connectors plug directly to the factory units so there is no cutting or splicing of your factory wires. Once installed, the 6-Mod allows users to advance or retard the factory's timing curve, program a step retard for use with nitrous systems or even map out a timing curve through a laptop by using MSD's Pro-Data+ software.
( 4 )
$899.95
$808.95
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,099.95
—
$1,549.95
$988.95
—
$1,123.95
AEM Electronics Tesla small drive unit control boards allow you to install a Tesla SDU in any non-OEM application, unlocking complete control when paired with an AEM VCU. The system provides full control of the SDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. AEM EV's Tesla inverter control boards act as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's SDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. Note: Inverter control boards must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla SDU. This system is designed for conversion and motorsports vehicles with Tesla SDU swaps. It will not control a Tesla SDU in a Tesla OE chassis. Features: * Programmable, direct replacement for Tesla SDU inverter control board (ICB) * Allows for customized control of torque and regenerative braking curves, torque rates, and motor spin direction via CAN to allow for Tesla Small Drive Unit installation in any desired orientation for retrofit applications * SDU board works with both front and rear variants of the Tesla SDU
Not Yet Reviewed
$1,099.95
MSD Ignition 12 amp electronic points boxes control the spark duration and the unique full power firing sequence of several magneto units, including the Pro Mag 12, Pro Mag 12LT, and Pro Mag 20. The energy from the generator is controlled with Field Effect Transistor (FET) technology, which is far superior to mags still using points as a trigger source. FETs are considerably more accurate and durable—and are capable of handling much more current. This is why the Pro Mag can deliver full energy sparks throughout the entire rpm range of the engine, while conventional magnetos fall short of full power at high racing rpm. Plus, these advanced points boxes keep each spark glowing for up to 26 degrees of crankshaft rotation.
( 1 )
$949.95
—
$999.95
On Sale
Now you can retrofit your earlier distributor-equipped Big Twin or Sportster for the modern world with ACCEL Mallory electronic advance distributors. With these electronic advance distributors, you have the option of running either single or dual fire mode with the appropriate coil and 14 preset advance curves to cover stock to high-compression engines. The modules also feature on-board rev limiting, an LED for easy static timing, and will work with or without VOES input. These Mallory distributors from ACCEL have a machined aluminum housing offering superior heat sink capabilities. They can be installed without the removal of stock heads and barrels. Update your ride and enjoy the benefits of these ACCEL Mallory electronic advance distributors.
Not Yet Reviewed
$1,099.95
$988.95
Install a Tesla Sport Large Drive Unit (LDU) in any vehicle—and achieve complete control with AEM EV's Sport LDU Inverter Control Board (P/N 30-8410) and an AEM VCU! This system provides full control of the LDU for programming torque curves, torque limits, regenerative braking, accelerator pedal response, drive-mode switches, and much more. The Tesla LDU currently comes in two versions, Base and Sport. AEM EV's Tesla Inverter Control Board acts as a VCU expansion device that replaces the stock Tesla ICB. Once connected to an AEM VCU using the supplied communications harness, calibrators can program propulsion strategies and characterize inputs through the VCU using AEMcal software. AEM EV's Sport LDU ICB was co-developed with Cascadia Motion, an industry leader in EV propulsion systems, to ensure the highest standards of quality and reliability. NOTE: The Inverter Control Board must be used with an AEM Vehicle Control Unit for programming and controlling a Tesla Sport LDU. This system is designed for conversion and motorsports vehicles with Tesla Sport LDU swaps. It will not control a Tesla Sport LDU in a Tesla OE chassis.
Not Yet Reviewed
$1,049.95
AEM Electronics VCU300 low-voltage harnesses are pre-terminated and designed to be installed in the front half of an electric vehicle. This harness offers flying leads for VCU300 power, wake switch, accelerator pedal, brake switch and heater with pre-wired connections for Comms port (DB9), Inline CAN, and AEM ancillary devices. Connector interface features include: * AEM VCU300 (VCU) * Battery Management System--Master (BMS) * Power Distribution Unit (PDU) * Main relay * Fuse * VCU300 power flying lead * 12 V battery flying leads (12 V battery) * Wake switch flying lead * Accelerator pedal position flying leads (APP) * Brake flying leads (Brake) * Heater flying lead * Insulation monitoring device lead (IMD) * DB9 communications port (COMMS) * AEM keypad (Keypad) * AEM dash (Dash) * Inline signals * Inline CAN
Not Yet Reviewed
$999.95
On Sale
AEM Electronics VCU275 low-voltage harnesses are pre-terminated and designed to be installed in the front half of an electric vehicle. This harness offers flying leads for VCU275 power, wake switch, accelerator pedal, brake switch and heater with pre-wired connections for Comms port (DB9), Inline CAN, and AEM ancillary devices. Connector interface features include: * AEM VCU275 (VCU) * Battery Management System--Master (BMS) * Power Distribution Unit (PDU) * Main relay * Fuse * VCU275 power flying lead * 12 V battery flying leads (12 V battery) * Wake switch flying lead * Accelerator pedal position flying leads (APP) * Brake flying leads (Brake) * Heater flying lead * Insulation monitoring device lead (IMD) * DB9 communications port (COMMS) * AEM keypad (Keypad) * AEM dash (Dash) * Inline signals * Inline CAN
Not Yet Reviewed
$1,049.95
$943.95
On Sale
MSD 7AL-2 Plus CD ignitions have all the features of the standard 7AL-2 with the addition of a 2-step rev control and a new diagnostic LED to deliver their full power at any rpm. Their multiple spark discharge circuitry gives better throttle response, off-corner performance, smooth idle, and more consistent launches. Their built-in soft touch rev control protects your engine from damage due to over-revving and they feature accurate rev-limiting action that's smooth, without backfires or roughness, and adjustments are easily made with plug-in modules. They can be triggered from points, magnetic pickups, crank triggers, and electronic amplifiers. MSD 7AL-2 Plus CD ignitions are available for 4, 6, and 8-cylinder engines. From NHRA to Circle Track, they're proven winners.
( 19 )
$849.95
$763.95
On Sale
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
$988.95
On Sale
MSD Digital E-Curve distributors will drop right into your engine and fire up with three simple connections! Not only are there no external controls or boxes to mount and connect, but you can set a timing curve with the twist of a rotary dial! That's right, no more springs or stop bushings to fumble with. A new digital module lets you select from 20 different "centrifugal" curves and five vacuum curves--that's 100 combinations! Simply remove the cap to access the rotary dials and select a curve to match your application. You can also set an rpm limit that will protect your engine from over-rev damage caused by a missed shift or driveline failure.
( 36 )
$849.95
$763.95
—
$849.95
Summit Bucks
ACDelco ABS control modules meet or exceed OEM part specifications to help them deliver the same fit and performance as your factory equipment. ABS modules read the data from your speed sensor and send the correct pressure to each wheel, enabling you to maintain steering control and stop quickly under most conditions. Hundreds of models are available for vehicles from the 1990s and up. Select the replacement ABS control module recommended for your application.
( 2 )
$757.99
—
$978.99
Equip your ride to conquer rugged terrain! American Autowire Severe-Duty universal wiring kits are powerful weatherproof electrical systems designed for use in harsh environments. They feature a compact, fully sealed 22-circuit fuse box with electronic flasher and 35 amp relay. The fuse box is protected by a sealed, manually resettable 200 amp circuit breaker for optimal dependability. The main and power harnesses come pre-terminated at one end in sealed connectors with tough, heat-resistant GXL wires. These systems will connect into most popular aftermarket gauges. Dimmer and headlight switches are provided with these kits. Connections and wiring include: * Turn signals * Headlights and taillights * Parking and brake lights * Gauges (tach, water temperature, oil pressure, speedometer) * Third brake light * License plate light * Basic engine functions and sensors * Horn * Coil * Electric choke * Transfer case warning lamp * Underhood lamp * Transmission kickdown
( 3 )
$916.75
ARC Pro Mod Flat Touch switch panels with backlit system kill switch are truly unique! These Flat Touch switch panels use no electronics, which makes them immune to EMI and RFI interference. Units master kill switch is designed to turn off any, none, or all the switches at the same time for safety during competition racing. Available in 4-switch, 8-switch, or 12-switch configurations, each module comes with a selection of race words for switch labeling. White face switch modules have text labels backlit red when the switch is off, allowing you to not only see where, but what each switch is. When the switch is turned on the backlight changes from red to green. Black face switch models are equipped with nightglow, and function exactly the same as white face switch modules but feature illuminated text and outer perimeter that automatically increases the unit's brightness at night to maintain better visibility in low light vehicles.
Not Yet Reviewed
$864.99
—
$914.99
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$1,099.95
$988.95
On Sale
A great way to get all of the power that you can out of your Ford crate engine is with MSD ignition kits. These ignition kits have everything that you need for your engine to reach its full potential--an easy-to-install, ready-to-run distributor featuring a high-output module that produces a vigorous jolt across the plug gap, a Blaster SS coil that's small but mighty and features efficient E-core windings, brass terminals and Rynite housing, and 8.5mm spark plug wires with separators--"the" performance wires for incredibly low resistance without electronic interference. Ford crate engine ignition kits also include a billet hold-down clamp, and a steel gear is installed on the distributor for compatibility with hydraulic roller camshafts. Power up your Ford crate engine with MSD ignition kits.
( 10 )
$949.95
—
$999.95
$853.95
—
$898.95
ARC has designed these Flat Touch switch panels with no electronic parts, making them unaffected by EMI and RFI interference. They are available in your choice of 4, 8, or 12-switch configurations and utilize the newest technology in components rated at up to 1 billion cycles. The ARC Flat Touch switch panels feature 40 amp relays, and each switch has an internal selector to allow for on/off or momentary switching. Included with the switch panels are a variety of race words that allow you to tailor the switches to your specific vehicle. The unique backlit design lights up red when the switches are off and then changes to light green when in use. With their weatherproof design, the ARC Flat Touch switch panels are ideal for open-cockpit applications. They also have a simple jumper connection that selects either 12 V or 16 V operation. Weighing in at under .5 lbs., the ARC Flat Touch switch panels provide weight savings, making them an excellent choice for your race car.
( 85 )
$765.99
—
$1,077.99
Banks Power Derringer iDash 1.8 DataMonster tuner systems are designed to be the smartest and safest way to add hp/torque to your diesel-powered vehicle. The microprocessor-based electronics safely optimize the same data input calibrations as your engine's ECU—and they do so in real time via an inline sensor connection and the OBDII port; no other competitor does that! Derringer tuners are equipped with a special coolant temperature watchdog that will disengage extra power when the engine is too cold/hot. They will also auto-adjust power when bad fuel starts to cause knock. Don't get stuck in "limp home" mode with other tuner systems; run with a Banks Power Derringer iDash 1.8 DataMonster tuner system. Features, items, and specs may include: * DataMonster displays up to eight parameters (per gauge) and can log up to 100 at a time * Performance logs and custom alerts available * Simple plug-and-play installation (easy removal for dealer service) * Works with cruise control engaged * Multiple power levels with on-the-fly level changing (with switch) * ActiveSafety (on select models) protects engine/powertrain * Easily concealable compact housing for the electronics * Warranty friendly—no reflash; no ECU traces * Expandable with other Banks Bus products * Value-priced, and loaded with many more great features
( 1 )
$769.00
—
$889.00
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 329 )
$849.95
$763.95
Odyssey extreme marine batteries are like an athlete that is both a sprinter and a long distance runner! The dual-purpose batteries have massive starting power, along with amazing deep cycling capability—up to 400 cycles at 80 percent depth of discharge. With twice the overall power and 3x the life of conventional marine batteries, the Odyssey extreme is ideal for trolling, starting, and for powering the many on-board electronic accessories common in today's boats and recreational vehicles.
( 1 )
$977.99
JMS Chip CD-1 Super Speedway ignition systems are complete plug-and-play capacitive discharge ignition kits designed specifically for professional racing. They include CD-1 Super Speedway ignition module, CD-1 SS ignition coil, the wiring harness and mounting plate. Unleash the power of your vehicle with JMS Chip performance products! Main features: * Plug-and-play unit is compact, lightweight and has fully encapsulated construction using surface mount electronics * Waterproof and highly resistant to vibration and shock * Uses an advanced 12-pin Deutsch connector for signal connections and components * All wires terminated into plug-and-play Weatherpack connectors * Compatible with 8-cylinder racing engines triggered by a magnetic pickup distributor or crank trigger * 135 mJ spark energy output * Set maximum RPM limit up to 9,000 rpm with 100 rpm steps * Highly efficient switching power supply based on US patents 6518733 and 6636021 * Less than 5-amp current draw at 8,000 rpm * Approved for Southern Super Series cars, Super Late Model Tour and Spears Southwest Tour Series
Not Yet Reviewed
$829.75
FuelTech offers a variety of complete and ready-to-install harnesses for fast, headache-free installation. FuelTech FT450/FT550 6-cylinder universal A harnesses have all the components needed to make a plug-and-play installation on an engine with a standard setup. The connectors, relays, and fuses are directly built-in and can be used with nearly any application with six injectors and six coils. They can be used with high or low impedance injectors, and the harnesses are set up for either VR or Hall effect cam and crank sensors. FuelTech 6-cylinder A harnesses include three relays with built-in fuses for main electronics, injectors, and coils, and the insulation and connectors are moisture, heat, and oil-resistant.
Not Yet Reviewed
$759.00
FAST XFI dash data loggers function as both electronic dashboards and data loggers for vehicles running FAST XFI fuel injection systems. Optional accessories, such as the FAST accelerometer, EGT modules, and dual sensor air/fuel meters can all be monitored in combination with XFI-based engine data through the loggers' high-speed CAN bus. With state-of-the art monitoring and data logging capabilities, they can assemble a comprehensive, real-time picture of just what is going on under the hood of your vehicle as it screams down the drag strip. They feature a 6 in., fully programmable LCD touch-screen display and have the ability to display their data in a multitude of scales, units, and gauge configurations for your viewing convenience. The backlit display is highly visible and can be user-customized to a wide variety of configurations at the mere touch of a finger or stylus. The FAST XFI dash data loggers are engineered to work with any level of vehicle modification, from stock to all-out race. They are able to monitor and display output from a variety of different input sources, including frequency (rpm, wheel speed, etc.), analog input, and sources that require programmable input parameters, such as MAP and MAF. As data loggers, they deliver over 1 hour of data logging time with the standard 2 MB memory module; optional memory modules of up to 16 MB are available separately. They do not require immediate data downloads between drag strip runs--all of the data collected over the course of a racing event may simply be stored and then downloaded for analysis at a later time.
( 1 )
$1,069.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
