Availability
Showing In Stock Items. Show All 28 Items.
On Sale
DiabloSport modified PCMs help you unlock the performance potential of your vehicle by adding horsepower, torque, and fuel economy to your ride! They feature a factory-modified powertrain control module that allows your vehicle to be tuned. Swap it with your factory-installed PCM so that you always have a backup computer—the installation only takes about 10 minutes. In addition to this modified PCM, you will need a compatible tuning device, such as a DiabloSports inTune i3 or Trinity 2 model (application dependent), in order to install a performance tune. Whether your goal is towing your boat to the lake, tackling the toughest off-road trails, or beating your best time down the track, level up with the DiabloSport modified PCM best suited for your ride!
( 2 )
$899.95
—
$999.95
On Sale
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$959.00
$815.15
DIYAutoTune MegaSquirt Gen 2 plug-and-play engine management systems are standalone units designed as direct-fit, factory ECU replacements offered for a variety of foreign and domestic vehicles. These powerful and cost-effective options typically require an hour or less for installation, and each includes a base map to get the motor fired up easily and ready for fine-tuning to match your engine's needs--from mild to wild. MegaSquirt Gen 2 ECUs get the job done with an impressive feature list that will let you do a lot more than you'd expect anywhere near this price point. DIY AutoTune MSPNP Gen 2 ECUs typically feature: * Fully plug-and-play installation--no wiring required for basic functionality * Base map is pre-loaded to help your engine start on the first turn of the key * Real-time tuning and data-logging with a laptop connection * Supports most aftermarket wideband sensors * 16 x 16 fuel tables allow high-resolution tuning * 12 x 12 ignition tables * Multiple acceleration enrichment strategies * Closed-loop idle speed control * Air conditioner control * Onboard peak and hold drivers support both high and low impedance injectors--no external ballast resistor is needed * Allows removal of stock airflow meter or stock MAF sensor, if so equipped * 12 x 12 air fuel ratio target tables for use with wideband oxygen sensor for precise tuning and table trim * Built-in 2-step rev limiter/launch control with flat shift * Real-time barometric correction * Internal 4-bar MAP sensor reads up to 44 psi of boost * Over-boost protection * Closed-loop boost control (requires boost solenoid kit) * Knock sensor input with adjustable sensitivity * Headphone output for knock sensor--listen for knock while you tune! * Table switching input--change fuel and spark maps on the fly for different fuels, nitrous activation, etc. * Input for flex fuel sensor--switch between E85 and gasoline on the fly! * CAN Bus connector allows interconnection of other MegaSquirt-compatible devices for additional functions, like: EGT input, automatic transmission controller, additional sensors ... the possibilities are limitless! * MegaSquirt Gen 2 plug-and-play ECU * MSPNP RS232 serial tuning cable, 6 ft. (USB adapter sold separately, if needed) * Tuning software and documentation USB stick * 6 ft. vacuum hose for MAP signal and "T" fitting * Four screws for ECU mounting
( 2 )
$869.99
On Sale
Edge Pulsar LT modules are a one-of-a-kind in-line module that offers feature combinations never before seen in a standalone module. With the Pulsar LT you will be able to adjust throttle response levels, tire size adjustments, TPMS options, speed limiter, and more without having to tune or modify the vehicle. The Pulsar LT connects directly to your vehicle's computer system and makes its changes in-line with the other modules. Utilizing steering wheel controls, the Edge Pulsar LT owners can make all the changes that they desire at any time, driving or parked. The Pulsar LT module, in truth, is multiple products in one. Sure, you can go out and purchase a throttle booster, and then a separate calibration product to adjust tire size and TPMS, and possibly find a custom tuner to adjust the speed limiter but why clutter your vehicle with expensive products that only provide part of the solution you are looking for. The Edge Pulsar LT modules deliver serious options, seamless control, and does so affordably, with an innovative single easy-to-use solution. Product features: * Plug-and-play installation using factory connectors * Multiple throttle sensitivity levels * On-the-fly adjustability via steering wheel controls * Speed limiter adjustment * TPMS Adjustment * Tire size speedometer correction * Axle ratio * Read and delete DTCs * Auto start/stop * AFM/DFM disable * Manual DPF Regeneration * Engine idle up * Allison transmission relearn * Features vary by vehicle model
Not Yet Reviewed
$789.95
On Sale
The next generation Edge Evolution CTS3 programmers will continue to include all of the great features, benefits, and extended coverage from the CTS2 product line, while adding a sleek, new exterior and cutting-edge screen. The Evolution CTS3s reprogram your vehicle's stock computer through the OBDII port, saves the factory files to easily return to stock, and then uploads the Edge calibrations. They come with multiple power levels custom tuned by a whole team of engineers, and can be installed in minutes without ever popping the hood. Edge Evolution CTS3 programmers greatly increase horsepower and torque, and not only re-tunes your vehicle, they stay mounted in the cab of the vehicle offering real-time, monitoring of vital engine and vehicle data for a complete gauge package. Edge Evolution CTS3 programmers feature: * Most comprehensive, state-of-the-art, multi-gauge/tuner touch screen display on the market * 3rd generation design is faster and more capable than ever * Power levels designed for daily driving, towing, performance, and extreme * Simple installation just plug into OBDII port--no wiring required * Monitor key vehicle parameters like transmission temperature, boost, rpm, and dozens more * Full color, 5 in. capacitive touch screen with auto-dimming * Offers crystal clear data at your fingertips * Highly customizable gauges and backgrounds * Boot-up directly to gauge screen upon key cycle * Swipe capability allows easy switching between screens as needed for towing, performance, economy, etc. * Built-in performance meter measures 0 to 60, mile times, and more * Advanced integrated data logger with export capability * Ability to add vehicle licenses to tune multiple vehicles with one product * Clear and read DTC codes * Wi-Fi updateable
( 13 )
$849.95
—
$1,049.95
$763.95
—
$943.95
On Sale
DiabloSport Trinity 2 EX Platinum PCM swaps saves factory settings and returns easily to stock. Trinity T2 Platinum PCM swaps are designed for those who want the best of both worlds, pre-loaded, high performance tunes in addition to custom tuning capability. The T2 Platinum is already equipped with some of the best tuning right out of the box, but DiabloSport knows you like to bolt-on upgrades and extract every bit of horsepower out of your vehicle. That is where CMR custom tuning comes in. Their nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. These kits offer the most advanced performance programmer and monitoring setup of its kind. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Taking advantage of DiabloSports cutting-edge PCM Swap program allows you to focus on the sleek, new look with T2, while enjoying power and improved drivability, and the swap process is seamless, affordable, and best-in-class.
( 2 )
$1,099.95
$808.95
—
$999.95
COBB Tuning Subaru Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Subaru ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Subaru Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Subaru specific features (availability varies by model): * Realtime Tuning: Make changes to the map in real time, while the engine is running; speeds up the tuning process and allows quick changes to features like launch control and map switching * Launch Control: Set RPM threshold for performance launches; builds boost and generates instant horsepower off the line * Flat Foot Shifting: Keep the throttle on the floor and maintain boost between gears with this customizable RPM setting *Adjust Idle: Adjust idle on the fly to compensate for aftermarket parts; separate menus allow adjustment for A/C on and off * Adjust Timing (select STIs only): Globally reduce timing on the fly to compensate for poor-quality pump fuel * Launch Mode (some Forester XTs and WRX CVTs only): Allows manipulation of OE torque limiters to build boost and generate horsepower when launching; driver-controlled
( 4 )
$770.00
COBB Tuning Volkswagen Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Volkswagen ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Volkswagen Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport * Accesstuner: Create custom calibrations using Accesstuner software; for modifications beyond COBB Stage Power Packages, custom tuning may be required. Volkswagen specific features (availability varies by model): * Adjustable Traction Control: Adjust target slip on the fly and maximize tire grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level between 3000 and 8000 RPM; enabled in COBB OTS maps * Launch Control: Adjust on the fly with six pre-configured RPM slots to dial-in based on track conditions and vehicle configuration; enabled in OTS Maps and configurable within Accesstuner Pro
( 1 )
$770.00
COBB Tuning Ford Accessport V3 programmers have large, full-color, high-resolution screens that allow you to monitor up to six parameters in real time. They are fully customizable from the look (multiple bezel colors), layout (race, street, or dyno gauge clusters), and mounting options. The Accessport is the world's best-selling, most flexible, and easiest-to-use Ford ECU upgrade solution. Unlock power hidden within by replacing conservative factory settings with more aggressive calibrations. Follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps or use custom-mapping for any modification level. COBB Tuning Ford Accessport V3 programmers feature: * In-vehicle mount, with on/off switch * Interchangeable faceplates * Simple installation: Everything is included; intuitive on-screen instructions identify your exact vehicle and available maps * Simple uninstall: Return your ECU to exactly as it was before with the easy-to-use Uninstall option from the main menu * Troubleshooting: Read codes, clear codes, identify vehicle, I/M readiness, keep alive memory, memory snapshot, reset ECU * Change maps: Store up to 100 maps from COBB's OTS map database or from your favorite COBB tuner; quickly switch between them for any need * Gauges: Use the Accessport as gauges to monitor boost or any other live information, directly from the ECU * Data logging: Record multiple data channels simultaneously for in-depth evaluation of engine performance; stores up to 10 hours * Performance measuring: Measure 0-60 time, 60-foot and 1/4 mile ETs, and trap speed * Shift light: Set custom RPM warning lights for perfect shifts * AP Manager: Download free; use a PC or Mac to manage maps, download data logs, or quickly update your Accessport Ford specific features: * Adjustable Traction Control: Adjust target slip on the fly and maximize grip to suit track conditions; enabled in ECU calibration * Flat Foot Shift: Improve shift times and maintain boost during shifts; hold engine RPM at a set level * Launch Control: Adjust on the fly with six pre-configured RPM slots based on track conditions and vehicle configuration * Change Map Slot: Allows instant changes to several calibration tables without re-flashing the ECU; each map slot is in a folder in the Map Switching Features group
( 7 )
$770.00
On Sale
Edge Pulsar MD modules unlock the full potential of your medium-duty diesel truck with an unparalleled blend of power, efficiency, and control, enhancing your driving experience, whether it's used for work or for play. Engineered with precision and innovation, Edge Pulsar MD modules are equipped with advanced tuning capabilities, delivering a noticeable boost in horsepower and torque, and providing drivers an exhilarating yet reliable performance upgrade. Experience the thrill of improved throttle response and power while maintaining the highest levels of engine safety and durability by continued use of the factory defuel and ECM monitoring systems. Seamlessly integrated into the vehicles on-board ECM and steering wheel controls, Pulsar MD modules offer a hassle-free installation process that requires no complex modifications or ECM flashing. This means the device is easily removed, returning the truck to stock settings in minutes. The plug and play functionality ensures that users can enjoy the benefits of enhanced performance and feature control like speedometer calibration for larger tires, without compromising the integrity of their vehicles factory settings. Elevate your driving adventure with Edge Pulsar MD. Features: * Five adjustable on-the-fly power levels: -- 1. Economy 25hp/70tq -- 2. Heavy towing 60hp/125tq -- 3. Light towing 90hp/180tq -- 4. Drive 95hp/255tq -- 5. Extreme 120hp/280tq (peak to peak gains) * Gains up to 135hp/300tq at 2,550 rpms * Speedometer calibration for tires up to 50 in. * Gained 2.1 seconds in 0 to 60mph tests * Command Manual Regeneration * Read and clear DTCs * Uses steering wheel controls to adjust levels and features
Not Yet Reviewed
$1,099.95
$988.95
On Sale
The Edge Pulsar LT with Insight CTS3 Programmer is a new inline module for various Chevrolet and GMC applications—offering complete adjustability of many features, all from your steering wheel controls. Without modifying your truck's ECM, Pulsar LT offers you the ability to adjust throttle response, tire size, gear ratio, TPMS, and your top speed limiter. (Pulsar LT for Duramax applications can also be used to command a manual DPF regen cycle, automatic transmission relearn, clear DTC's and high idle the engine.) It connects directly to the vehicle computer system, making installation a breeze and leaving your factory warranty intact. Stepping it up one notch, this kit also includes the industry-leading Insight CTS3 monitor for all the live data you could ever ask for. The Insight is the most preferred digital gauge monitor in the market today, used by daily drivers and enthusiasts everywhere. It's the most comprehensive, state-of-the-art, multi-gauge touch screen display on the market. CTS3 is an instantaneous and inexpensive alternative to bulky, analog gauges that would otherwise cost hundreds of dollars and take hours to install. This is the perfect tool for those who want to monitor their vehicle's performance and prefer not to program their vehicle. It can also be intelligently configured to provide audible and visual alerts to help you protect your vehicle. A vehicle-specific A-pillar display mount is also included for a sleek, more permanent way to mount the CTS3 in the cab of your truck. These mounts offer an OE look, while keeping the monitor within easy reach without obstructing your view of the road. Order the model recommended for your vehicle and engine application. Product features: * Calibrate Tire Size (29 in. - 50.9 in.) * Adjust Throttle Response * Modify Gear Ratio (2.00 - 6.99) * Change Top Speed Limiter (98 - 140 mph) * Clear Diagnostic Trouble Codes * Transmission Relearn * Manual Regen * Reprogram TPMS Threshold (40 - 99 psi) * Simple Installation Process * Does Not Modify ECM
Not Yet Reviewed
$1,249.95
$849.95
COBB Tuning Nissan Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your GT-R. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can follow COBB's staged upgrade path with pre-loaded off-the-shelf (OTS) maps—or use custom mapping for any modification level. The Accessport V3s will be the last engine management solution you'll ever need. They are also available with TCM flashing. Order the programmer designed for your year/submodel application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * In vehicle mount with on/off switch * Faster, easier to use * Interchangeable faceplates
Not Yet Reviewed
$875.00
On Sale
Juice up your rig with Attitude from Edge Products! Plus, get the added value of the new CS2 monitor! Edge Juice with Attitude CS2 programmers control the timing and duration of injector firing for your rig to deliver maximum performance, improved drivability, and better fuel economy. These plug-in modules are easy to install and come with factory-style connections. You'll be driven with on-the-fly adjustability and monitoring capabilities at your fingertips. You can monitor vital engine data, enhance your towing performance, and customize your Attitude to fit that of your own with the included Mystyle software. You control your rig's attitude with the right juice--Edge Juice with Attitude CS2 programmers.
( 2 )
$1,049.95
—
$1,249.95
$799.95
—
$943.95
On Sale
FiTech Ultimate TPI standalone ECUs bring an old GM TPI-controlled engine (L98, LB9) into modern times. These standalone EFI kits plug into all existing sensors on a GM TPI engine and provides complete control of the engine. From timing control to self-learning fueling, FiTech Ultimate TPI standalone ECUs deliver new life into the GM TPI engine.
( 9 )
$954.00
$810.90
On Sale
DiabloSport inTune i3 Platinum PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They, too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or more. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 2 )
$849.95
$763.95
—
$849.95
On Sale
DiabloSport Trinity 2 EX PCM swaps deliver the sleek look of their advanced T2 programmer, while you enjoy more power and improved drivability. Each swap kit sets you up with Trinity 2 EX high-resolution 5 in. capacitive touch screen with full-swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. DiabloSport PCM swap kits include a one-time, free cross shipment of an unlocked PCM directly to you. This allows you to swap the PCM in your vehicle, without disabling the vehicle for long periods of time to send the PCM in to be unlocked. And DiabloSport modified PCMs offer some of the best mods in the industry. The swaps will also include an OBD2 extension cable that will be required to install in order to allow tuning and monitoring on that dash. DiabloSport Trinity 2 EX PCM swaps are best-in-class tuning solutions for your vehicle.
Not Yet Reviewed
$899.00
$808.95
—
$899.00
On Sale
DiabloSport inTune i3 PCM swap kits include an inTune i3 and a one-time unlocked PCM cross shipment for your Chrysler vehicle—saving you money, while providing the ability to tune your ride with ease! DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Select the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
Not Yet Reviewed
$873.95
$785.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
