Availability
Banks Power turbo speed sensors are designed to fit almost any turbocharger. Turbo speed is a critical parameter to ensure that your turbocharger is operating at peak efficiency and in a safe operating point. The data is very useful in comparing turbo or boost response due to upgrading or modifying various components of the boost air system. Each sensor is plug-and-play with the iDash when used with the Banks 5-channel analog with frequency module. Setup is simple, and only the blade count needs to be input to configure the sensor for your turbocharger. Additional notes: * Requires iDash DataMonster or SuperGauge plus the 5-channel analog with frequency module harness (61301-16) that has the 4-pin "Ch-E" connector. * M6 x 0.5mm thread for universal install * Contains internal signal processing circuitry for an accurate measurement * Monitors turbocharger speed from 5,000 - 400,000 rpm
Not Yet Reviewed
$510.00
The Detail Zone Ford 2.3 Turbo EFI injector harnesses are designed exclusively for Stinger Performance's PiMP MegaSquirt-based systems. The engine harnesses are complete with circuits for electric fan, fuel pump, water temperature/oil pressure, and alternator. They include enough high-temperature zip loom and harness wrap tape to complete the installation once lengths and layout have been verified. The Detail Zone's wrapped EFI harnesses for Stinger Plug-in MegaSquirt Powered systems also include a firewall grommet and complete instructions. Choose the appropriate batch or sequential fire for your Ford.
Not Yet Reviewed
$587.95
—
$599.95
MSD 6-BTM CD ignitions are ideal for engines with a turbo or supercharger. Not only will they benefit from full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation. The dash-mounted control knob lets you easily adjust the amount of timing retard from 0-3 degrees per pound of boost pressure. Dial away engine-damaging detonation by retarding the timing in relation to boost pressure, and run on the threshold of detonation for maximum power and efficiency. You also get overrev protection from the soft touch rev control. They work with 4, 6 (even fire only), and 8-cylinder engines using a distributor. They include rubber shock mounts and 3,000, 6,000, 7,000, and 8,000 rpm plug-in rev limit modules.
( 25 )
$749.95
On Sale
Clearance
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$999.95
$599.50
MechMan Elite Series billet alternators offer great amperage output and durability. Their 6-phase technology, combined with massive twin rectifier assemblies and 12 diodes, makes these stunning alternators totally durable for daily use. Plus, the 6-phase hairpin stators make the alternators fundamentally more efficient, equating to incredible output at extremely low engine rpm, less energy wasted in the form of heat, and more horsepower to the wheels. MechMan Elite billet models are available for replacement or upgrade, and they are available in a unique selection of finishes and amperage outputs. Choose one designed for your vehicle.
( 10 )
$524.00
—
$599.00
On Sale
The Edge EZX module is the ultimate performance upgrade for your 5th Gen RAM Cummins, offering total control over your truck with power adjustability on-the-fly. With easy installation, improved fuel economy, better towing performance, and feature control through the industry's first smartphone app, you'll be amazed by what EZX can do for your truck. Compatible with both Standard and High Output engine variants, the throttle response and drivability are exactly what you want and need. This module is completely plug-and-play and leaves no trace within the system when removed for dealer service work. Engineered and developed specifically for the daily driver and towing application, EZX is a safe, emissions-friendly upgrade you'll wish you would've made sooner. With gains as much as 60 hp and 130 lbs.-ft. of torque, the EZX can be adjusted while driving through your factory steering wheel controls, allowing you to fine-tune your driving experience at your fingertips. Using the innovative smartphone app available for download through your app store (available for both Android and IOS), you gain even more access to your truck's features, including: calibrating for tire size and gear ratio changes, throttle pedal sensitivity, max cruise control speed, exhaust brake/tow haul button recall, TPMS settings, engine temperature protection, gear display, fog lights with high beams, and even a turbo timer! EZX app also allows you to read and clear trouble codes, check your emissions readiness status, and perform a manual DPF regen cycle. EZX offers features the competition just can't at a price point that's hard to beat! NOTE: When paired with the Insight CTS3 in kit form, the two devices still work independently of each other; and the Insight CTS3 will be used for monitoring only. All EZX control is still accomplished via the smartphone app and steering wheel. Product features: * 5 power levels adjustable on-the-fly through steering wheel controls * Engine high idle adjustable through steering wheel controls when in Park * User-adjustable throttle booster settings in each power level via app (Economy, Drive, Sport, Performance, Extreme) * Tire Size Speedo Calibration via app (Up to 40 in. tire size) * Tire Pressure Monitoring Sensors Enable/Disable, Warning On/Off, and Pressure Threshold adjust via app * Gear Ratio Calibration via App * Engine Coolant Protection Enable/Disable via app (Module adds no power until 120 degree ECT, backs down power at 240 degrees ECT) * Button Recall Enable/Disable via app; remembers Tow/Haul and Exhaust Brake settings * Turbo Timer Setup and Enable/Disable via app; once enabled, feature will work on every engine shutoff cycle * Max Cruise set speed adjustable via app (Set max cruise speed at 40-97 mph) * Fog Beams with High Beams Enable/Disable via app * Gear Display in Drive on factory display Enable/Disable via app * Manual DPF Regen via app * Read and clear ECM/TCM diagnostic codes via app * Check Emissions Readiness monitors via app
( 8 )
$729.95
$529.95
—
$749.95
These Edge Comp modules maximize engine efficiency by monitoring the rpm, timing, turbo boost pressure, and fueling parameters. The modules use this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. Timing and fueling enhancements are controlled via CAN-BUS through the Data Link and by connecting directly into the Bosch fuel injection pump. The Edge Comp modules feature five power levels with power gains ranging from 40-120 hp. Each of the five power levels has an independent 5-level adjustable responsiveness setting, providing for a total of 25 levels of adjustability! The responsiveness settings enable you to dial-in the optimum balance between responsiveness and low-boost smoke control, no matter what additional power modifications have been made to the engine. The Comp modules are fully adjustable on the fly, and mount inside the cab.
( 1 )
$779.95
These Edge EZ modules unleash the potential of this monster by carefully monitoring rpm, timing, turbo boost pressure, and fueling parameters, and adjusting the fueling and timing to maximize power, torque, and drivability. The Edge EZ modules allow maximum fueling at full turbo boost, and provide an additional 40 to 70 hp and up to 220 ft.-lbs. of torque. Simply plug in the Edge EZ connectors into two stock connections, and you're ready to go. These modules can also be stacked with other upgrades to deliver even more power. They can't be beat for easy installation and power upgrades. Go ahead, install an EZ today and feel the incredible difference it makes!
( 7 )
$549.95
aFe Scorcher Blue modules increase fuel pressure, turbo boost, and overall vehicle performance—producing double-digit power gains. Designed with factory-style connectors, they easily connect to engine sensors for a quick and simple installation. The LED control switch can be routed through the firewall into the cabin for a hard-wired solution, or you can connect wirelessly to the module via Bluetooth with the smartphone app. It's a free app in the Apple and Google Play stores, and allows your smartphone to become a hand-held remote. The aFe Scorcher Blue module has four power settings: Stock (green), Sport (yellow), Sport+ (orange), and Race (red). This is the fastest way to safely gain significant horsepower. Order the model designed for your specific vehicle.
( 1 )
$553.00
—
$729.00
MechMan 6-phase hairpin high-output alternators offer a solution to the inadequate alternators that come from the factory on specified vehicles. These replacement units feature twin rectifiers with 12 massive press-fit diodes, as compared to the small 8-diode rectifier in the stock alternator. Even mild performance builds will typically consume more amperage than what stock alternators can provide. Hairpin stator technology provides better high-rpm durability and better resistance to heat from the turbo manifold. The alternators utilize a high rpm-friendly larger diameter pulley, and bolt directly in place of the original equipment. Select the high-output racing alternator model recommended for your application. Note: A 4-gauge or larger positive and negative cable needs to be run between the alternator and the battery terminals for proper function.
Not Yet Reviewed
$519.00
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$516.00
—
$635.00
Granatelli Ford Coil-On-Plug connector kits utilize an exclusive solid stainless connector cable with stainless snap lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near "0" ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. These kits are engineered to exceed OEM specifications and to be OBD-II computer safe. Available with or without new coil packs.
( 3 )
$625.28
On Sale
Bully Dog ECM diesel tuners are designed to be stowed away after installation--simply set 'em and forget 'em. These powerful controlling devices are preloaded with three high performance, dyno-proven tunes that increase horsepower, torque, and fuel economy. They're built with simple, easy-to-use performance in mind, and can also read and clear diagnostic trouble codes. Give your rig the ability to tackle any challenge along the route with Bully Dog ECM diesel tuners. Features and specs: * Idle shutdown timer sets length of time vehicle will idle until the engine turns off to save fuel and extend the life of the turbo by allowing it to cool down before engine shutoff * Increase and decrease the set limit of the vehicle's cruise control saving time and money when crossing borders. * Speed limiter can be adjusted to automatically limit engine power * 75 to 100 hp gains possible in power mode * Free internet updates help assure that you always have the latest files for your vehicle * Fuel savings up to 12 percent and longer engine life * Adjustable options vary for each vehicle and are not available on all vehicles
( 1 )
$849.00
$764.10
Edge EAS competition sensor kits were created with future expandability in mind. They allow upgraded turbo users to monitor crucial EGTs to ensure that added power is not creating excessive heat, which may cause engine damage. The Psig boost sensor is perfect for an aftermarket turbo to have the ability to see what kind of boost you can build, or for fine-tuning your truck. The temperature sensor allows you to monitor temperatures in different locations and compare readings to be even more precise. Edge EAS (Edge Accessory System) is a must-have for users to connect multiple accessories, daisy-chain style, to monitor and display dozens of parameters on a single device. Includes: * EAS starter kit * EAS EGT probe * EAS universal 5 volt * EAS 0 to 100 Psig pressure sensor * EAS -40 F to 300 F temperature sensor
Not Yet Reviewed
$549.95
Banks Power offers iDash Pro and PedalMonster throttle response enhancers for a wide range of applications, including many Chevrolet, GMC, Cadillac, Dodge, Ford, Ram, Lexus, Scion, Subaru, and Toyota cars, trucks, and vans from 2005 and up. PedalMonster is the only OBD-connected throttle sensitivity controller for gas and diesel vehicles. It's tuned to eliminate factory throttle delay, instantly making your vehicle more fun to drive—and actually fixes dangerous flaws found in every other throttle controller. Additional details: * Total Throttle Control: Unlike conventional cable throttles, where your pedal is directly attached to the engine's butterfly valve, electronic accelerator pedals are not mapped linearly. Part throttle drivability is often dampened as a means to stretch fuel economy, giving a mushy and unresponsive feel when on the road. Banks Power spent months engineering smooth pedal contours that are a pleasure to drive. * Tune Your Sensitivity: Select from PedalMonster's 3 driving environments with a total of 150 unique throttle contours and tune out your pedal's dead spot: -- City: Provides a smooth driving experience with a linear throttle feel and is tuned for daily driving -- Sport: Adds more sensitivity in the throttle's midrange for a sportier throttle contour feel -- Track: Lets you get into your power sooner with less throttle input, helping push through turbo spool lag or delay * Choose Your Control: PedalMonster can be used as a stand-alone device, controled by Banks' free mobile app for a stealthy install. Or, pair the PedalMonster with an iDash Pro or Data Pro to be able to adjust pedal settings on-the-fly and open up a whole world of data not available on your vehicle's dashboard. See what data iDash Pro can display for your vehicle. With Bluetooth connectivity built in, new features and support for other vehicles can be added over-the air. No computer required. * OBD-II Connectivity Brings Safety: PedalMonster is the ONLY throttle sensitivity controller connected via the vehicle's +12 V OBD-II port to read vehicle data. This reliable power connection and vehicle information is used to provide smooth pedal response and enhanced safety features. Key features: * 150 selectable smooth throttle contours * Smartest, safest, throttle sensitivity controller available * Tip-in control gradually adds sensitivity below 10 mph * Reverse Safety returns pedal to stock in reverse * ActiveSafety failsafe system * Powered by fused +12 V via OBD, not +5 V pedal reference circuit like others * Control and view activity in real-time via mobile app or iDash * Simple plug-and-play installation
Not Yet Reviewed
$738.00
—
$779.00
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 1 )
$799.91
HP Tuners Introduces VCM Suite MPVI4 Credit Pro packages, the latest evolution of their industry-leading OBDII interface. Built for professionals and enthusiasts alike, the computer programmers connect your vehicle to VCM Suite software (5.2+) for faster, smarter, and more powerful tuning and diagnostics than ever before. With upgraded hardware, expanded connectivity, and future-ready Wi-Fi capabilities, the MPVI4 redefines what's possible in performance calibration and data acquisition. Models are available with 0, 2, 4, 6, or 8 credits. HP Tuners VCM Suite MPVI4 Credit Pro packages feature: * Improved standalone logging: the most powerful device yet, capable of delivering standalone logging performance on par with VCM scanner and a wired connection * Upgraded hardware architecture: New internal processor for improved data throughput and flashing performance; 30x more memory than previous generation MPVI3 * High-speed USB-C connectivity: Faster, more reliable communication with your PC and vehicle * Bluetooth 5.2: Seamless wireless connection for scanning, logging, and TDN support * Wi-Fi ready (future update): Wireless VCM Suite connectivity coming soon * Enhanced storage and efficiency: Increased onboard memory for robust logging sessions * Improved OBDII fitment: A revised, tapered design means a more secure connection and better compatibility with even more makes/models * Built-In Pro feature set: Standard on every MPVI4, enabling standalone data logging and external sensor integration with PROLINK+ * RGB status LEDs: Clear visual indicators for power, connection, and activity status * Cross-Platform Compatibility: Works with VCM Suite (5.2+), TrackAddict, and RaceRender
Not Yet Reviewed
$599.95
—
$799.91
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 3 )
$599.99
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$749.95
Mopar Replacement transmission wiring harnesses carry power and signals to/from the solenoids and sensors. These direct-fit replacements are manufactured from quality materials, just like the originals, to fit just like the originals. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to restore and/or repair your Chrysler, Dodge, Jeep, or Ram properly and safely.
Not Yet Reviewed
$779.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$589.99
—
$704.99
Mopar Replacement offers engine control modules for a wide range of applications, including many Jeep, Dodge, Chrysler, and Ram vehicles from the 1950s and up. These new or remanufactured replacements are among the best and longest-lasting electrical system parts available. They will deliver the fit and performance you expect. Select the ECM recommended for your Mopar ride.
Not Yet Reviewed
$501.99
—
$732.99
Mopar Replacement door wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that they will provide the fit, form, and function of OE specifications. Order the harness designed to fit your application.
( 2 )
$539.99
—
$664.99
Mopar Replacement fuel pressure sensors are built to the same original equipment specifications as those produced for vehicle manufacturers to ensure proper system functionality and restoration of vehicle performance. Because sensors wear out, a quality replacement is necessary. Mopar Replacement offers a comprehensive range of OE-quality vehicle system sensors to provide very reliable and accurate measurements and feature extremely fast response times to ensure your vehicle runs as intended.
Not Yet Reviewed
$696.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
