Availability
Showing In Stock Items. Show All 49 Items.
On Sale
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 14 )
$599.95
—
$649.95
$538.95
—
$583.95
These mini starters from Chevrolet Performance feature a compact design that delivers plenty of torque and increased clearance for extended oil pans and header exhaust systems. These lightweight and powerful starters rely on a 3.75:1 gear reduction to spin a high-compression engine.
( 17 )
$510.56
Upgrade your boat's charging system with MechMan high-output marine alternators. These certified high-output, 170 amp 6-phase alternators feature 12 diodes and twin rectifier plates for excellent durability with high-end audio installations. They include a 6-groove serpentine pulley and meet or exceed SAEJ1171, ISO 8846, and USCG Title 33 standards for ignition protection. MechMan marine units are hard black anodized, then grey enamel coated to provide the best possible corrosion resistance. All MechMan does is alternators. So, when you need a bolt-in, high performance charging solution for your boat, MechMan high-output marine alternators should be your choice.
Not Yet Reviewed
$519.00
MechMan S Series 6-phase alternators offer incredible output in a compact and durable package. The 240 amp models offer the best balance between peak output, and output at engine idle RPM; while the 320 amp models are all about max power and not designed to charge at low idle speeds. Both S Series alternators feature 12 diodes, twin rectifier plates, and outstanding airflow ensure long service life, even in severe conditions. These units come equipped with a smaller 1.75 in. diameter alternator pulley, and will require a slightly shorter drive belt to be installed for proper belt tension. Order the model recommended for your auto application.
( 31 )
$699.00
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 56 )
$625.95
On Sale
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$699.95
—
$749.95
$628.95
—
$673.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 624 )
$599.95
—
$749.95
$538.95
—
$673.95
On Sale
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
$718.95
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$825.95
$513.95
—
$742.95
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$927.95
—
$995.95
$699.95
MechMan Elite Series cast alternators offer great output at idle RPM and excellent durability in a direct bolt-in package. Their 6-phase technology, combined with massive twin rectifier assemblies and 12 diodes, makes these alternators totally durable for daily use, while still maintaining great output at low-rpm. These alternators will make 180 amps at engine idle speeds—with a full 250 amp output at cruising speeds. The units come with an OEM diameter pulley, making them perfect for high-rpm and racing use. They're available for fitment on a wide range of cars, trucks, and vans from the 1990s and up. Order the model recommended for your application. (Note: Elite Series cast alternators may require a rectangle to oval adapter harness if your vehicle was equipped with the CS144 heavy-duty charging option from the factory. This is not common.)
( 7 )
$519.00
—
$549.00
On Sale
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$799.95
$628.95
—
$799.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$579.95
—
$632.95
$520.95
—
$568.95
On Sale
MSD recognized the need for a true marine performance distributor and built these Pro-Billet marine distributors to answer this need. Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration, and harsh vibrations all take their toll. The housing is CNC-machined from billet 6061-T6 aluminum, creating a housing with no porosity or weak areas. Internally, a Tuftride coated steel shaft is guided by a sealed ball bearing and an extra-long sintered bushing for high-speed stability and endurance. Each distributor uses MSD's race-proven magnetic pickup to trigger the ignition control. The pickup receives its signal through a precision-manufactured reluctor that is attached to the shaft. The mechanical advance assembly receives a QPQ plating for long lasting resistance to corrosion in marine environments. Their mechanical advance assembly is easily adjustable, so you can dial-in an ignition curve to match your boat's application. Three additional sets of advance springs and stop bushings are included with detailed instructions, making adjustments easy to perform and understand. The distributor cap is bolted and sealed to the aluminum base, and has two flame arrestor holes with brass screens machined into the base of the distributor. This design works to prevent ignition of gas fumes that may build up in the engine compartment. A special weathertight connector is supplied to provide a positive lock and water-resistant connection. This heavy-duty connector will withstand high temperatures and water, and plugs directly into the MSD 6M-2 or 7M-2 ignitions. The distributors come complete with a high-quality, bolt-down alkyd cap and MSD's racing rotor. These high-quality distributors have been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard. They require the use of a separate ignition box.
( 4 )
$632.95
$549.95
—
$568.95
LS Classic Series distributor and plug wire sets are the perfect way to top-off your vintage appearing LS swap. LS Classic Series starts with a set of high-quality 7mm Kevlar® spiral core spark plug wires with high-temp silicone pre-installed 90 degree coil boots and straight unterminated spark plug boots. The wires are 9 ft. long with 40 ohms of resistance per ft., giving you all the length and performance you need to remote mount your coils—so they're out of sight and out of mind. The plug wires first connect to the coils and then pass into the hollow cast-aluminum distributor body that is bolted to the engine's valley plate. The wires continue on to the spark plugs through the distributor for an authentic nostalgic look. Top-off your vintage appearing LS swap perfectly with one of these distributor and plug wire sets by LS Classic. Note: These distributors are designed to bolt to the back two bolts of LS Classic valley pans and will not clear valley plates with raised ribs or oil pressure sender bosses.
Not Yet Reviewed
$724.95
On Sale
MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection
Not Yet Reviewed
$790.95
$593.95
MechMan 6-phase hairpin high-output alternators offer a solution to the inadequate alternators that come from the factory on specified vehicles. These replacement units feature twin rectifiers with 12 massive press-fit diodes, as compared to the small 8-diode rectifier in the stock alternator. Even mild performance builds will typically consume more amperage than what stock alternators can provide. Hairpin stator technology provides better high-rpm durability and better resistance to heat from the turbo manifold. The alternators utilize a high rpm-friendly larger diameter pulley, and bolt directly in place of the original equipment. Select the high-output racing alternator model recommended for your application. Note: A 4-gauge or larger positive and negative cable needs to be run between the alternator and the battery terminals for proper function.
Not Yet Reviewed
$519.00
Quarter Master Ultra-Duty starters give your race car a good start to a great finish! These mini starters are ready for track duty with massive cranking power, heavy-duty solenoid and bearing assemblies, and CNC-machined billet aluminum adapter mounts for increased torque and a precision flywheel fit. Quarter Master Ultra-Duty starters are ready to meet the temperatures and demands of your high-compression engine. Think you're saving money buying a less expensive starter? Inferior starters will leave you cold on the street and track--not good! Bolt on the power to get started--bolt on track-tested Ultra-Duty starters from Quarter Master.
( 2 )
$508.53
If your starter is no longer engaging your Harley's® engine, get it involved with All Balls Racing high-torque starters. They're manufactured with all-new components fine-tuned for starting your Harley-Davidson® V-Twin engine. Make it the perfect performance union with All Balls Racing starters. The high-torque starters feature: * Clutches with 20 percent oversize rollers * Idler gears manufactured from cold-headed steel * End-frames which are cold-chamber die-cast and precision-machined * Armature hairpins resistance-fused to the commutator * A 10/32 in. threaded output shaft * Conversion bolt for the earlier 1/4 in.-20 threaded output shafts * Choice of finish, including chrome or black powdercoat
( 3 )
$500.94
On Sale
Holley EFI Smart Coils are a bolt-in ignition upgrade for your late model HEMI or Coyote engine. Here's the difference over a stock coil: they produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are available individually or in sets of 8. * For Coyote or Hemi combinations currently using Holley EFI or Terminator X, use Smart Coil Ignition Harnesses 558-312 and Coil Extension Harnesses 558-326 for a plug-and-play solution. * For new Holley EFI installations on Coyote engines, use with Holley EFI Coyote TI-VCT Main Harness for Smart Coils 558-122 and Smart Coil Ignition Harness 558-312 for a plug-and-play solution. Features: * Direct bolt-on to factory valve covers * Same wiring pinout as other IGN-1A coils for easy plug-in upgrades (Will not work with factory wiring) * More spark energy than any other smart coil on the market for maximum fuel burn during combustion sequence * Low current draw means less demand on the electrical and charging system * Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECUs * Maximum operating voltage of 18 V—for compatibility with both 12 V and 16 V electrical systems found in many performance/race applications
Not Yet Reviewed
$799.95
$718.95
Today's modern hot rods require more current than ever, especially at idle and low engine speeds. Powermaster engineered a new alternator to update the late model hairpin technology used from the factory with the new HPR Large Frame Series alternator! Available for a number of late model V8 engine platforms; these hairpin replacement alternators provide more than enough amps to power the accessories of a modern motor. Features include: * Simple and effective one-wire or OE style connections available * 195 amps at idle, 215 amps while cruising, and 250 amps at top end * Voltage compatibility: 12 V and optional 14 V and 16 V * Efficient internal components produce more output, while consuming less engine power * Direct bolt-in to OEM and most aftermarket brackets * Supplied with a factory spec decoupler, solid, clutch or underdrive pulley * Stock diameter pulley accepts the factory belt * Available in cast, black and polished finish * Proof of performance with included dyno tag Note: One wire alternators will bypass the factory ECU.
( 7 )
$515.99
On Sale
Dinantronics X kits are designed to extract maximum power out of a completely stock vehicle and those with basic bolt-on modifications without having to alter the factory engine programming. Dinan Dinantronics X Performance tuners are Bluetooth smart and offer convenient access to the adjustment of power levels directly from the palm of your hand. Advancing beyond their predecessors, X tuners connect to additional inputs and/or have a more refined tuning strategy, yielding more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash, Dinan's Dinantronics X units are perfect alternatives to satisfy the craving for "more". Dinan Dinantronics X Performance tuners will take your engine's performance to levels that stock programming cannot, and they do it without affecting long term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Whichever level of engine tuning is ultimately chosen you can be sure you will be pleased by the result. Features and benefits: * Bluetooth smart (Android and iOS Compatible) * App download/pairing process detailed within the installation instructions * Seven power levels and a bypass setting to choose from * Smooth and predictable power delivery * On-board diagnostics and factory safeguards maintained * Unaffected by dealer factory updates * Plug-and-play installation * 14-day satisfaction guarantee * 1-year limited warranty
Not Yet Reviewed
$649.95
$583.95
—
$649.95
Painless Performance Trail Rocker Jeep TJ accessory control systems allow you to control up to eight accessories on your TJ Jeep! The heart of this kit is enclosed in the weatherproof housing that surrounds the power center with eight fuses and relays. Controlling it are eight prewired switches mounted in a Painless custom switch panel that mounts on your dash. The power center then provides you with all the necessary weatherproof connectors and wiring to connect to your Jeep accessories ranging from lights to air lockers. They are easy to install with detailed instructions and plug-and-play design. Features: * Control up to eight accessories, (8) 30 amp fuses and (8) 30 amp relays * Weatherproof housing around the power center and connections * Custom bolt-on powdercoated bracket for the power center * Switch panel mounts eight LED switches in a factory non-intrusive dash location
Not Yet Reviewed
$544.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
