Availability
Are you in need of an air-fuel-ratio monitor kit for your HP Tuned vehicle? Measure your AFRs with extreme precision using Ballenger Motorsports' AFR500v3 wideband control kits preconfigured specifically for vehicles using HP Tuners' software. As one of the most critical tools a tuner requires for properly calibrating a vehicle, the AFR500 air fuel ratio monitor provides professional grade measurement of air-fuel-ratio without breaking the bank. Ballenger AFR500v3 kits offer a linear analog output to be used as an input to engine control systems, gauges, or data acquisition systems. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. Key features and benefits: * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Display gasoline (standard) * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Digitally derived output with a higher resolution digital/analog converter * 4 times the measurement resolution (4096 increments compared to the previous 1024) * ASIC chips (a common point of failure from electrostatic damage) have been replaced with a custom board providing better protection and upgrade capabilities * Ability to display from 0.0 to 6.0 in lambda setting for better flexibility with alternate fuels, such as diesel * Ability to upgrade firmware for future sensor types * All harnesses, control units, accessories, etc. are backward and forward-compatible * Options are selectable at any time via internal jumpers * NTK Calibration grade sensor highly recommended for low AFR methanol applications
Not Yet Reviewed
$549.99
RideTech RidePro-HP Ride Height sensor kits upgrade your existing RidePro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of RidePro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. RideTech complete RidePro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$524.50
FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.
( 4 )
$551.95
—
$734.95
Looking for a solution to measure your vehicle's air-fuel ratio with CAN configuration? Designed for professional tuners and DIY enthusiasts alike, Ballenger AFR500CANv3 wideband monitor kits provide plug-and-play digital CAN Bus messaging and the ability to configure for CAN-enabled systems with specific presets for HP Tuners, making them a seamless and convenient option for measuring air-fuel-ratio in your HP Tuned build. They are capable of reading air-fuel ratio values from 9.0:1 to 16.0:1 (standard range) with a resolution of 0.1 to provide excellent resolution in the tuning range of most performance vehicles. They come equipped with PC software for programming your CAN or OBDII message structure--no adapters or extra hardware are required for PC programming. Key features and benefits: * CAN flying lead and USB programming harness * PC software for full digital programmability * Large, bright digital display controller (3.4 in. x 2.7 in. x 1.3 in.) * Display lambda * 13 ft. wiring harness with sealed connections * NTK production grade sensor * Standard measurement range * Weld-in steel exhaust boss and plug * Mounting Velcro® * Comprehensive installation, troubleshooting, and tuning manual * CAN specific manual addendum * HP Tuners/OBDII CAN connection * 0 to 5 V analog output signal * 11 to 28 V input power (24 V system capable) * Compatibility with most aftermarket ECUs * Programmable CAN termination resistor * Sensor averaging filter setting * Oxygen percent output * Fault condition diagnostics * IP, pump cell current output * Sensor temperature output * Heater duty cycle output * Battery voltage output
Not Yet Reviewed
$639.98
Haltech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
—
$750.00
Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.
( 8 )
$594.95
Mopar Replacement nitrogen oxide sensors detect the amount of NOx gas being emitted from diesel engines. Each sensors information is used by your vehicles engine control module (ECM) to adjust various parameters and reduce those harmful exhaust gas emissions. They are manufactured to OE specifications and designed to fit your specific Mopar application.
Not Yet Reviewed
$506.99
—
$658.99
Haltech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$550.00
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$699.00
Mopar Replacement ABS modules are genuine OE replacements. That means your Chrysler, Dodge, Fiat, Jeep, and even some Mitsubishi models will receive the perfect part to repair and/or restore performance and safety, just as it should be. These modules are engineered from high-quality materials to provide reliable, long service with the right fit, function, and value. Order the ABS module recommended to fit your application.
( 14 )
$510.99
—
$732.99
Tune your carburetor or fuel injection system with Daytona Twin Tec WEGO III wide-band exhaust gas oxygen sensor systems. These stand alone units have built in data logging so you can analyze the data logged and make the corrected changes. Daytona Twin Tec WEGO III wide-band exhaust gas oxygen sensor systems will log over 2 hours of data including AFR, and engine RPM. They are available in a single channel or dual channel unit. Other features: * Includes WEGO III unit, Bosch LSU4.2 wide-band oxygen sensor (2 for dual channel), 18x1.5mm weld nut (2 for dual channel), and software on CDROM. * Unit can be programmed to display Lambda or correct AFR values for any hydrocarbon fuel with a known stoichiometric ratio * Suitable for motorcycle, automotive, and other small engines * Measurement range is 10.3 to 19.5 gasoline AFR or 0.70 to 1.33 Lambda * Bright daylight readable blue LED display with automatic dimming * Built in USB interface * Fully encapsulated with water proof LED display
Not Yet Reviewed
$614.95
Standard Motor Products fuel pressure sensors ensure that your vehicle's fuel supply is precisely metered for optimum mileage and performance. Don't take chances with your fuel system. If your sensor is faulty, Standard Motor has a line of replacements to fit numerous models.
( 3 )
$565.99
—
$653.99
Granatelli offers innovative mass airflow sensors as an upgrade for your stock MAF. The sensors feature state-of-the-art hybrid electronics, which provide improved ignition and injector timing control that results in a 10 to 15 hp gain at the rear tires. They're easy to install and housed in a rugged, injection-molded body to reduce heat soak, which is a common problem with stock metal sensors.
( 6 )
$500.65
Wilwood has engineered two reverse floor-mount brake pedal assemblies, one with a standard bias adjuster balance bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly. Wilwood floor-mount 2-pedal assemblies feature lightweight aluminum frames with high-strength reinforced I-beam style forged pedal arms and stainless steel foot pedal pads. The pedal heads adjust vertically to fine-tune the pedal ratio (5.25:1 to 6.00:1) for more feel or less pedal effort. The non-skid waffled pedal pads can be laterally adjusted for driver preference. A clutch and two brake master cylinders (sold separately) mount to the assemblies with the adjustable balance bar or the friction-free, trunnion-based adjustable Tru-Bar balance bar, providing front-to-rear brake bias fine tuning. Both the balance bar and Tru-Bar incorporate a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Select the Wilwood 2-pedal assembly with the brake pedal option desired. Key features and notes: * Adjustable pedal ratio * Adjustable foot pads * Forged aluminum pedal arms * Adjustable clutch stop * Wilwood's own black e-coat finish * Triple high-strength steel master cylinder mounts -- Traditional flange mounts at a 45-degree angle -- Accommodates three Wilwood compact remote master cylinders (sold separately) * Balance bar utilizes a pin and clevis pushrod attachment system -- Ensures the smallest possible misalignment angle for bind-free operation through the entire range of travel * Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm with spherical rod-end bearing pushrod attachments -- Reduces compliance and friction for more accurate brake feel -- Pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar-style pedals
Not Yet Reviewed
$659.95
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 37 )
$531.99
—
$719.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$629.99
—
$656.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$636.99
—
$721.99
Don't take chances with an old, questionable, or malfunctioning camshaft position sensor that can leave you stranded. Camshaft position sensors read the camshaft position and relay this information to your vehicle's ECM. This information is required for functions such as initiating injection on sequential injection engines, the trigger signal for the magnet valve on pump valve injection systems, and for cylinder-specific knock control. Standard Motor Products replacement cam position sensors are designed to exceed OEM specifications for accurate, reliable, maintenance-free operation. Trust your vehicle's engine management system needs to Standard Motor Products.
( 14 )
$584.99
Standard Motor mass airflow sensors are higher quality, precision alternatives to remanufactured models. MAF sensors measure the amount of airflow entering the intake manifold and must communicate clearly with your vehicle's Engine Control Module (ECM). Remanufactured components with debris from prior use can hinder this communication and cause your vehicle to experience drivability issues. With many new—not remanufactured—MAF sensors in the Standard lineup, they cover more than 90 percent of all MAF-equipped vehicles, and all are airflow-calibrated to ensure accuracy. SMP-manufactured sensors are designed with improvements such as thicker walls, upgraded components, and a custom-designed platinum RTD sensor. The result is a line of MAF sensors that provide highly accurate readings and precise airflow output under all operating conditions. Order the model designed for your car, truck, or van.
( 2 )
$544.99
—
$659.99
Clearance
Standard Motor nitrogen oxide sensors are designed to detect NOx levels in diesel-fueled vehicles that must comply with state emissions regulations. These NOx sensors are direct-fit OE replacements for the originals, ensuring proper fit, form, and function, as well as ease of installation. The high-temperature sensors have a plug-and-play design, so no additional programming is required. Order the model recommended for your application.
( 1 )
$512.99
—
$633.99
Standard Motor EGR pressure feedback sensors are designed to be OE replacements for your factory EGR pressure feedback sensors. All Standard Motor products meet or exceed OE specifications. Keep your engine's performance up to par with these Standard Motor EGR pressure feedback sensors.
Not Yet Reviewed
$552.99
Standard Motor YAW sensors are genuine replacements, with the fit of an OE part. As a global manufacturer of automotive aftermarket products, SMP maintains complete quality control throughout the entire manufacturing process—from the components' inline production to the finished product, as well as extensive testing to ensure reliability. If you need to replace a suspension YAW sensor, choose the Standard Motor model recommended for your vehicle.
Not Yet Reviewed
$595.99
—
$689.99
Standard Motor Products steering wheel position sensors are direct-fit OE replacements that ensure ease of installation. These sensors are made of high-quality materials to withstand extreme conditions and they undergo extensive testing to ensure reliability.
Not Yet Reviewed
$529.99
KW EDC delete units eliminate persistent trouble codes that exist when upgrading the suspension on your vehicle with electronically regulated dampers. With these electronic damping cancellation kits, the functioning of the control unit remains completely intact. They're available for several applications, including a variety of Corvette models. The solution whereby the serial damper regulation is shut down—while avoiding trouble codes—is a KW EDC delete unit.
Not Yet Reviewed
$583.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
