Availability
Showing In Stock Items. Show All 31 Items.
Biondo Racing Products introduces the Digital Delay Mega 475 Delay Box with built-in Mega Dial controller. Every time you change Your Dial on the Mega 475, your ET is automatically updated on the Dial Display board. No need to enter Your Dial a second time on another unit. Biondo started with the popular Mega 450 and improved on it by adding some new racer-requested features, including the Set and Go push-button mode which is similar to Z-Force. Additional new features include the ability to directly control any V2 Dial Display Board, and the ability to Tap Up and Down on the same pass. The Replay Tach can now record up to nine passes and replay them on the screen. Bracket and Pro Mode both have two 4-Stage timers and can shift up to 5 times by RPM or Time. Features / Specifications: * Face Size: 6 11/16 in. x 5 in. x 1 3/4 in. * Overall Size: 8 11/16 in. x 5 in. x 1 3/4 in. * 12 and 16 volt compatible * 4 - Push-button inputs * 4 - 12 amp outputs -- (Transbrake, SFO, Throttle Stop and Shift) * Built-in controller for V2 Dial Display boards * Crossover Delay Box * CrossTalk Compatible * Controls any V2 Mega Dial Display Board * Day and Night intensity settings for the Dial Board * 5 push-button modes * Set and Go push-button mode (similar to Z-Force) * 1 or 2 hits at the tree with built in 'How Late' feature * Tap Up or Tap Down to .001 seconds * Push-button Interrupt safety feature * Two separate 4-Stage Timers (programmable to thousandths) * Starting Line Enhancer (SLE) * Shift up to 5 times by RPM and/or Time * Built in digital tach with peek RPM and Replay Feature * Selectable Function Output (SFO) -- Line Locks for anti-roll staging -- Starting Line Enhancer -- Second 4 Stage Timer -- Spare Transbrake * Driver Reaction Tester * The large backlit screen displays 4 lines of data at once * Backlit keypad * Glove-friendly * Compatible with 4, 6, and 8 cylinder engines * Compatible with most ignitions
( 1 )
$637.99
—
$659.99
Innovate's LM-2 digital air/fuel ratio meters combine an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggyback fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, Innovate's LM-2s are the tools you need to dial-in maximum horsepower. The meters' digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s' self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. The LM-2s also feature two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes factory-ready for narrow band simulation; analog output 2 is configured as 0 V = 7.35 AFR and 5 V = 22.39 AFR. With the provided LM Programmer software, these analog outputs may also be configured by the user. Innovate's LM-2s are available in single wideband and dual wideband O2 configurations. Additional features include: * Patented "Direct Digital" wideband technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool, read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card (included) * Playback log data on screen with powerful LogWorks software (included) * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * 4 fully-differential analog inputs * 2 configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
( 10 )
$555.99
—
$737.99
AiM Sports sixth generation lap timer, MyChron6 2T, integrates advanced technologies, making them powerful data analysis centers capable of providing increasingly accurate and detailed information from different sources. AiM Sports MyChron6 2T lap timers offer high-precision GPS, 6-axis IMU, Bluetooth connectivity, a second CAN for additional sensors, a long lasting battery, and manages two temperature sensors. They are designed with five individually configurable RGB LEDs that you choose the color and value thresholds for their activation, plus two alarm RGB LEDs, an ambient light sensor, and eight backlit colors to customize your screen. They have 4GB of memory, a rechargeable lithium battery with approximately 20 hours of life, and are IP67 rated. Features and benefits: * Five individually configurable RGB LEDs can be configured to show your best lap/split time, monitor RPM level, and even indicate the right moment for gear shift * Two alarm RGB configurable LEDs can customize behavior based on water temperature or other parameters * Ambient light sensor makes brightness and contrast ideal in all light conditions * Dedicated pages make information monitoring easy and prompt * Bluetooth connectivity * Wi-Fi offers easy wireless data download * Two temperature inputs * Second CAN connection is dedicated to connect external modules requiring CAN communication protocols * USB-C connection allows you to charge your logger, and permits data storage in the optional massive 16 GB dedicated memory module * Inertial platform--6-axis 50 Hz Inertial Measurement Unit (IMU) provides information to control the engine and behavior of the chassis * Upgraded GPS--internal, high precision, 25 Hz four-navigation satellite system (GPS, GLONASS, BeiDou, Galileo) receiver and an internal database including information about the track. The precision of the calculated lap times is 1/100 of second. * Track database can recognize the finish line coordinates of thousands of tracks all over the world * Data analysis--data can be downloaded (via cable, Wi-Fi, or Mini USB storage) and analyzed in depth on your PC with RaceStudio 3 software
Not Yet Reviewed
$699.00
—
$759.00
HalTech's vast array of data acquisition components includes the TCA-8 Eight Channel Thermocouple Amplifier--a direct plug-and-play, compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB. * Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4-ft., Quick Start Guide * Suits: Elite and NEXUS Series ECUs only
Not Yet Reviewed
$549.00
FuelTech's FT input expanders are input expander modules compatible with the FuelTech PowerFT line (FT500/FT500LITE/FT450/FT550 and the FT550LITE/FT600). These FT input expanders offer 20 inputs for sensor readings—such as pressure, flow, temperatures, position, and activation of functions using keys or buttons, and four differential inputs rpm reading and speed. The expander modules fully integrate with FTManager software and communication via the CAN network, with a simple and fast configuration through an interface already known to users familiar with FuelTech products.
Not Yet Reviewed
$599.00
Monitor your rides critical systems and performance with Racepaks IQ3 dash displays. IQ3 displays are completely customizable, allowing you to monitor the information you want in real time while placing info on multiple pages allows you to organize the information and avoid clutter. Racepak helps avoid the clutter associated with wiring as well by utilizing their V-Net cable system. The unique pass though wiring allows you to hook multiple sensors together in series leaving only one wire that needs run to the display or data logger. The display is powerful enough to be used as a standalone, real time gauge system or with any V-Net compatible data logger. The user can even define alarms to alert them to a problem and shift lights to maximize your performance. Take control of your racecar, hardcore offroader or street car with Racepaks IQ3 dash displays.
( 6 )
$749.95
Innovate LM-2 Ultimate shop kits set you up to dial in maximum horsepower. The Ultimate shop kits are available in single or dual channel versions and include 18 ft. sensor cable, exhaust clamp, inductive clamp, and bung/plug. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC
Not Yet Reviewed
$623.99
Shock travel sensors are linear potentiometers that record the slightest amount of suspension movement. Monitoring the extension and compression of the shock absorbers aids greatly in understanding what the chassis is doing. It is a principal means of evaluating suspension movement and chassis setup. Regardless of your type of racing, Racepak shock travel sensors provide information that is frequently crucial to separating winners from the also-rans. They are usually connected through an analog port of a data recorder (sold separately) and monitored at high sample rates. An analog channel is required for each sensor; a separate sensor is required for each wheel monitored.
Not Yet Reviewed
$519.95
FAST XFI and XFI Sportsman are popular, well-designed systems. Their new XFI Edash is compatible with XFI systems, letting you view multiple sensors in real time, then make adjustments through the full-color touchscreen tuner without a laptop or any software. Edash uses the current XFI wiring harness Calport connector, giving it plug-and-play capabilities. They automatically sense which EFI system is attached--and display the data through a compact, readable dash unit. A multi-use accessory, Edash eliminates the need for a separate tach, voltage regulator, and temperature gauge; with an XFI driveshaft rpm sensor, you'll even see mph and mpg info. These units display up to 20 live data readings at a time, allowing you to evaluate them as a whole instead of scrolling back and forth. Additional features include: logging error codes; both maximum and minimum sensor readings; user-selectable start-up screen; and an articulating, quick-release suction cup mount. FAST XFI Edash touchscreen tuners provide live data, with the ability to easily make changes for improved performance.
( 7 )
$517.95
On Sale
MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units designed to monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with the MSD Power Grid system controller (sold separately), and come with an extension harness, along with all of the sensors, connectors, and parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)
( 1 )
$799.95
$718.95
Have you ever had a tune-up on your engine that was just perfect? Or, did you spend the time and money to dyno your engine? Wouldn't it be nice to go to the track and get back to that same tune-up every single time? With the Computech EGT Plus (exhaust gas temperature) monitor kits you can make sure that your vehicle is tuned correctly, week in and week out. Choose the EGT Plus monitor kit that suits your needs and get ready to tune your fuel system with confidence to maintain the performance edge and consistency you need to be a winner! Additional features of the EGT Plus monitor kits include: * Available with single or dual probes * Available in weld-in or clamp-on styles * Unit monitors dual temperature channels * Power source through 9 V battery or 12 V vehicle supply * Continuous mode--simple maximums * Record switch mode -- Choose when to record -- Maximum temperature and rpm * Trans-brake mode -- Launch temperature and rpm -- Finish line temperature and rpm -- Maximum temperature and rpm -- Time maximums occurred -- Notable time, temperature, and rpm
( 2 )
$519.95
—
$629.95
Dedenbear Lightning delay boxes feature a billet aluminum enclosure that keeps all of the precision circuitry protected. The small multi-functional units' can be every racers little helper! Features include: * Four different delay modes * Tap/tap down * Starting line launch control * Two 4-stage throttle stop/nitrous timers * Adjustable transbrake lockout * East touch illuminated keypad * Lighted display for easy nighttime viewing * Independent line lock output * Remote dial-in board display output * Accidental transbrake release protection
( 1 )
$709.99
—
$746.99
Racepak SmartWire keypads are designed specifically for use with the Racepak SmartWire kits. The keypads allow user input for up to eight functions. Their clean look and soft-touch buttons blend with any interior and provide a clean, finished appearance.
Not Yet Reviewed
$619.95
Innovate LM-2 dual digital air/fuel ratio meter basic kits feature the LM-2 that combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Innovate basic kits include the accessories to display your air/fuel ratio, either on the meter and/or on your PC. Innovate LM-2 features: * Patented DirectDigital wideband sensor control, 100 percent digital wideband air/fuel ratio technology * Wideband O2 compatible with all fuel types * Dual Channel A/F version * OBD-II Scan tool--read/clear DTCs and log up to 16 channels of CAN OBD-II data * Log directly to SD card * Playback log data on screen and/or with powerful LogWorks software * Large high-contrast graphics LCD * Built-in rpm converter (direct frequency or with optional inductive clamp) * Four fully differential analog inputs * Two configurable linear analog outputs * Positive lock connectors for all connections * Innovate MTS serial IN and OUT * USB connection to your PC Innovate dual basic kits include: * LM-2 meter * Bosch wide-band oxygen sensors * 8 ft. sensor cables * Cigarette lighter power adapter * USB cable for PC connection * Weld-in bung and plug kits * Manual
( 1 )
$710.99
Racepak V-Net EGT junction boxes provide a smart single-wire connection to your drag racing vehicle network (V-Net). Available as pug-and-play assemblies or individual components pre-programmed for your convenience, these sensors measure the data and the modules that convert the signal from the sensor, so that it can be transmitted. Available as individual or grouped thermocouples for each cylinder or bank of cylinders. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT junction boxes.
Not Yet Reviewed
$619.95
Racepak non-contact infra-red temperature sensors are designed specifically for the motorsports market. These compact but rugged sensors are capable of monitoring temperature data for a variety of surfaces. The non-contact design is well-suited for stationary or moving surface temperatures, such as tire or race track surfaces. They have a 4:1 ratio focal point, e.g., when the surface being monitored is four inches away from a sensor, the focal point will be one inch in diameter.
Not Yet Reviewed
$579.95
FuelTech FT450/550 Sportsman Datalogging A harnesses are designed around a Big Block Chevy, yet these harnesses have extra-long leads that allow them to be used in numerous other applications. They provide a plug-and-play solution to easily incorporate datalogging into any setup equipped with an FT450 or FT550 ECU. These harnesses come pre-terminated to plug directly into essential data logging input channels and have an extra input connector to add up to two more configurable inputs for sensors or buttons. They're also equipped with two extra connectors that allow the use of 10 outputs to control EFI fuel Injectors, ignition control through a CDI box with points input or smart coils (eight coils on wasted spark is not recommended for carbureted V8 applications). Tech specs: * Harness is set up for either VR or Hall effect cam and crank sensors and includes two relays with built-in fuses for main electronics, injectors, and coils * FT450 connector (FT550 A connector) * CPC firewall connector * Each connector has its own label and harness insulation is heat, moisture, and oil-resistant * Pre-terminated connections: for Wide Band 02 Sensor x2, Oil Pressure, Fuel Pressure, Engine Temperature and Transmission Temperature * Drive shaft sensor/2-step connector * Extra Inputs connector: 2 configurable inputs for sensors or buttons * Extra Outputs connector: For DIY expansion to control EFI fuel injectors or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Ignition Expansion Connector: For DIY expansion to control ignition or relay activation for accessory control (transbrake, shifter, nitrous, throttle stop, fans, pumps, etc.) * Comes with two 40A relays and fuses to power everything—the relays power the ECU, Wideband Nano O2, Peak and Hold drivers, sensors, and extra connectors Contents of package: * Harness and instruction manual
Not Yet Reviewed
$799.00
FuelTech EGT-4 CAN conditioners are compatible with any Type K thermocouple (grounded junction or not). They feature a 4-channel signal conditioner with CAN bus communication for PowerFT ECUs that can be used to read EGTs, CHTs, oil, air, water or any other temperature using a Type K thermocouple. These units work as an input expander for PowerFT ECUs, freeing up four white input channels to be used for other purposes. With the possibility to use up to four EGT-4 modules in the same installation, as many as 16 different channels will be available for all sorts of data acquisition. PACKAGES AVAILABLE: * V8 / 2 units, harnesses and 8 sensors: -- with 2 harnesses -- 2 of each 42 in./36 in./30 in./24 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 6 cylinder / 2 units, harnesses and 6 sensors: -- with 2 harnesses -- 48 in./42 in./36 in./30 in./24 in./18 in. Thermocouple sensors included -- Add second EGT-4 CAN unit * 4 cylinder / harness and 4 sensors: -- with harness -- 42 in./36 in./30 in./24 in. Thermocouple sensors included * 4 rotor / harness and 4 sensors: -- with harness -- 4 of the 36 in. Thermocouple sensors included * 3 rotor / harness and 3 sensors: -- with harness -- 3 of the 36 in. Thermocouple sensors included * 2 rotor / harness and 2 sensors: -- with harness -- 2 of the 36 in. Thermocouple sensors included
Not Yet Reviewed
$674.00
CORE ECU is HP Tuners debut standalone engine management solution, delivering superior control over your powerplant with many features that go beyond the constraints of factory ECUs. HP Tuners offers several wiring harness options to mate with their CORE ECU. Their CORE flying lead ECU harness is unterminated, providing a 15 ft. length with labeled open leads to customize your harness installation.
Not Yet Reviewed
$549.99
Lowdoller Motorsports laser ride height sensors are designed to provide precise information about the vehicle's height and movement, aiding in suspension setup for optimal performance. These laser sensors are used to accurately and continuously measure the vehicle's distance from the track surface, enabling precise aerodynamic tuning, suspension adjustments, and analysis of the car's behavior by calculating the cars pitch, roll, and heave movements. These sensors achieve this by projecting a laser that reflects off the track and is captured by a detector, which then sends data to a data logger or Engine Control Unit (ECU) for real-time analysis and adjustment.
Not Yet Reviewed
$504.50
Altronics O2 Alert warning and recording systems are specifically designed to record air/fuel ratios with a warning output. Not only do they record up to two wideband oxygen sensors, they also record engine rpm and have a programmable warning output to protect against detonation. The systems feature a backlit display, one wideband O2 sensor, a warning output, and software. The warning output can be used to activate a warning light, enable fuel enrichment, shut down nitrous, or retard timing. Recording can be started by a preset rpm value or switch, and can be played back on the systems or downloaded and graphed to a PC.
( 1 )
$719.99
FAST XFI EGT (Exhaust Gas Temperature) modules allow XFI owners to monitor up to eight EGT sensors without requiring the use of the eight square auxiliary XFI inputs. The modules utilize a small, thin cable to communicate through a high-speed CAN (Controller Area Network) connection protocol at 500 kbps. They measure and transmit data from k-type thermocouples with a range of 32 to 1,670 degrees F (0 to 910 degrees C). Once transmitted, the data is available for viewing and logging through either the XFI or the FAST dash logger. FAST XFI EGT (Exhaust Gas Temperature) modules are available individually with wiring harness and manual, or in kits that also include fittings and thermocouplers.
Not Yet Reviewed
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
