Availability
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 431 )
$54.45
—
$90.85
For off-road, marine, racing, or other extreme environments, MSD Blaster high-vibration ignition coils are the best choice. Their sturdy metal housing is potted with a premium-grade epoxy to completely encase the coils' primary and secondary windings. This protects the coils from high and low frequency vibrations. Alkyd material is used to form the spark tower because of its high dielectric characteristics. For your convenience, a standard canister-type coil mount can be used, and the coils can be mounted in any position.
( 144 )
$65.35
Manufacturer Rebate
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 512 )
$50.35
—
$78.50
Summit Bucks
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 7 )
$60.99
—
$100.99
Upgrade from your stock coil to more powerful PerTronix Flame-Thrower II coils. Designed for use with PerTronix's own Ignitor II® ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems.
( 283 )
$63.10
—
$71.05
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 507 )
$52.69
—
$95.59
NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps
( 13 )
$92.45
Summit Bucks
ACDelco GM Genuine Parts knock sensors are the GM recommended replacement for the vehicles original component. They monitor the engine for pinging or spark knock. The sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion. The engine control module then uses that signal to adjust the ignition timing and air/fuel mixture. These GM Genuine Parts knock sensors have been manufactured to fit your GM vehicle, providing you with the same performance, durability, and service life you have come to expect from General Motors.
( 102 )
$60.99
—
$70.99
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 424 )
$61.45
—
$92.25
Holley Sniper EFI HyperSpark ignition coils are the perfect ignition upgrade to complement your Sniper EFI installation. This high-output coil produces 135mJ of spark energy when used with the HyperSpark ignition box, ensuring complete combustion. The ignition coil comes self-contained in its own mounting bracket, and mounting hardware is provided to facilitate installation. Holley Sniper EFI HyperSpark ignition coil features: * Works with Sniper EFI for easy plug-and-play installation * Ignition coil connector removes any doubt of loose connections at the ignition coil * Integrated ignition coil bracket simplifies mounting ignition coil
( 42 )
$61.19
Summit Racing™ remote battery disconnect kits positively shut off all of the current from the batteries in the event of a short or accident. They're available in different switch actuation models, as well as for different amps. For safety and anti-theft protection, install a battery disconnect switch from Summit Racing™.
( 59 )
$94.99
A Tuff Stuff Performance high-amp output factory cast-plus alternator is just what every ride needs. These units produce the most power at idle to keep your battery fully charged at all times. Tuff Stuff products are hand-built with the best bearings, diodes, and copper windings available; and the cast-plus finish is applied in the company's Cleveland, Ohio factories. This leaves a natural cast look but offers extreme durability from pitting. The alternators are available in a variety of amperages, case and pulley styles for fitment on thousands of specific vehicle applications.
( 708 )
$99.99
—
$101.99
Match your camshaft with Summit Racing™ distributor gears. These small, durable replacement gears make a big impact on your engine's performance. They're available in a variety of materials and sizes for applications from the 1950s and up. Order the model recommended for your vehicle.
( 73 )
$77.99
MSD Blaster SS coils fire up your ignition with 40,000 V of power! When used with an MSD 6 Series ignition, these MSD Blaster SS coils delivered 300 milliamps of spark. The coils feature efficient E-core windings, brass terminals, and a durable Rynite housing.
( 170 )
$76.25
These Ford Performance Parts spark plug wire sets feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable).
( 692 )
$50.99
—
$92.99
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
—
$90.85
Mallory Replacement Ignition Modules are designed to replace the malfunctioning module. They are direct replacements for the modules provided in Mallory distributors and conversion kits. With an easy three-wire hookup, these modules will have your vehicle's ignition working great in no time.
( 114 )
$92.95
—
$113.95
PerTronix Flame-Thrower III ignition coils were developed for use with the new Ignitor III electronics. They feature an ultra-low resistance of 0.32 ohms with 45,000 V. The coils are engineered to charge to peak current typically 30-70 percent faster than other ignition coils. This means that maximum spark energy is sustained to higher engine RPM. The economical units are available in a black or chrome finish.
( 119 )
$64.15
—
$75.85
On Sale
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 284 )
$57.49
Holley Sniper 2 EFI input/output wiring harnesses give you access to two ground trigger inputs, two ground trigger outputs, the points output, tachometer output, and digital gauge output wires. The input grounds can be used for things such as AC Kick and nitrous stage activation. The output grounds can be used for electronic fan control, or A/C shutdown at WOT. This harness includes an additional 0-5 V TPS output commonly used for transmission control units, and a tach output wire to drive most common aftermarket tachometers. Additional details: * Wires come individually labeled for easy identification * 4 x 5 ft. long output wires * 2 x 5 ft. long input wires
( 4 )
$80.49
Give your battery extra protection and reduce underhood clutter with Summit Racing™ premium battery boxes. The sealed-type plastic boxes protect your battery from moisture, dirt, and debris, while the vent tube expells battery gasses from the box. They are available in red or black finishes and include mounting hardware.
( 63 )
$93.99
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 71 )
$106.95
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 656 )
$54.10
—
$105.00
MSD Blaster 3 coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets. The coils have a unique Power Tower that is twice as high as a standard tower. The extra distance prevents secondary arcing between the primary terminals and the coil center. The HEI-style boot and terminal keep the coil wire secure.
( 64 )
$65.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
