Availability
On Sale
Edge EAS accessory starter kits allow you to connect multiple accessories daisy chain-style to your Evolution CS or CTS programmers. A variety of computer programmer accessories are available, such as a power supply or cable. EAS kits are expandable at any time.
Not Yet Reviewed
$73.05
$65.75
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 101 )
$58.99
—
$99.99
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 663 )
$54.10
—
$94.40
Manufacturer Rebate
Do you have a damaged or malfunctioning manifold absolute pressure sensor? Innovate's dependable manifold absolute pressure sensors help to maintain engine performance and fuel efficiency by relaying changes in manifold pressures to your ECU. The computer uses the information to measure engine load so that your ignition timing can be advanced or retarded as necessary.
Not Yet Reviewed
$75.99
—
$96.99
On Sale
Mallory Pro Sidewinder spark plug wire sets are the company's most advanced wires. Their special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference—and at the same time allows the type of ignition system performance previously available only with Mallory Pro wires. The high-temperature silicone jackets can withstand more than 500 degrees F. Pro Sidewinders are available in ready-to-use sets cut for specific applications, or extra-long universal sets. Features: * Low 300 ohm resistance spiral core delivers high energy output for maximum spark at the plug * Great RFI suppression meets the demands of today's on-board electronics, such as electronic ignition, sound systems, and computer controls * 8mm ozone-resistant red silicone jacket repels water, oil, grease, and fuel—and withstands temperatures up to 500 degrees * Available in ready to install kits for various applications or universal V8 kits
( 34 )
$145.75
—
$167.45
$80.95
—
$92.95
Denso air/fuel ratio sensors (A/F sensors) were developed to measure air-to-fuel ratios under a wider range of driving conditions than oxygen sensors. A/F sensors, also known as wide-band oxygen sensors, send information to the engine management computer to make adjustments based on driving conditions. Their wider range and variable adjustments allow engines to burn fuel more efficiently and produce fewer emissions. As A/F sensor technology has evolved, Denso has been there every step of the way. From the first thimble-type sensors to today's heated, quick-response sensors required to meet ever more stringent emissions regulations, Denso has supplied OEMs with quality components and continues to innovate. Denso helped to develop this important technology and you can rely on Denso First Time Fit A/F sensors. Features and benefits of Denso air/fuel ratio sensors include: * Tarnish-proof platinum electrode provides longer life and maintains accuracy * Quick-response planar zirconia element quickly detects oxygen concentration * Measures air/fuel ratios from approximately 12:1 to 19:1 * Increased performance by mapping air/fuel ratios throughout the RPM range * Lower emissions by optimizing the air/fuel mixture * Reduces fuel consumption and maximizes catalytic converter life * First Time Fit design delivers the right part the first time
( 22 )
$53.99
—
$99.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$50.99
—
$99.99
Beck/Arnley distributor ignition pickups are brand-specific electronic sensors that generate a signal to an ignition module to trigger the spark plug at the correct time. They're designed as an OE-quality replacement part for foreign nameplate vehicles, ensuring proper fit, function, and appearance—just like the original components. Each pickup works in conjunction with the distributor's reluctor wheel, and its primary function is to provide RPM and timing information to the engine's computer. Additional details: * Provides RPM and timing data: The pickup generates a voltage pulse that is sent to the ignition control module. * Triggers the coil: The signal tells the ignition module when to fire the coil to create a spark for the engine cylinders. * Works with a reluctor wheel: As the distributor shaft turns, a reluctor wheel rotates with it. Tabs on the reluctor pass by the pickup, creating the pulses. * High-quality construction: The parts are manufactured with high-quality materials and corrosion-resistant components for durability. * Application-specific: Pickups are developed and tested for specific vehicle applications, such as certain Toyota or Dodge models.
Not Yet Reviewed
$56.99
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$72.99
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in a vehicle's electronic control system (ECU). The MAP sensors provide instantaneous manifold pressure information to the engine's computer (ECU). The data is used to calculate air density and determine the engine's air mass flow rate, which determines the required fuel metering for optimum combustion and influences the advance or retard of the ignition timing. A faulty Map sensor can cause a vehicle to run rich or lean, which will affect the vehicle's ignition timing and cause the engine not to run smoothly. Holstein Parts uses only the highest quality materials and engineering for parts that are truly built to match or exceed the OE part. Holstein Parts MAP sensors offer superior coverage for domestic and import applications.
Not Yet Reviewed
$63.99
—
$99.99
Cardone remanufactured camshaft synchronizers provide reliable performance at the best price. Each unit is tested, verifying its signal strength, wire harness polarity, ignition coil quality and overall pick-up performance, ensuring that your vehicle always starts on command. Cardone remanufactured camshaft synchronizers require an alignment tool (sold separately) to help facilitate an easy and proper installation. Features and Benefits include: * Precise machining tolerances prevent oil leakage, poor timing, setting of the Check Engine light, and premature failure * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * All electronic module components are 100 percent computer tested to ensure full functionality * Guaranteed fit and function * Meets or exceeds OEM performance
Not Yet Reviewed
$97.99
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$76.99
—
$77.99
Standard Motor Products ABS wheel speed sensor wiring harnesses are critical for getting information from your ABS sensor to your vehicle's computer and keeping your antilock braking system properly functioning. These quality replacement harnesses meet or exceed OE specifications, ensuring peak performance and service life.
( 3 )
$84.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
