Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
68 Results Found For "ls1"
Showing In Stock Items. Show All 100 Items.
Caspers Electronics Knock Sensor Wiring Harnesses with LS1 Cam Sensor Adapter
Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter allow the cam sensor used on the front of an LS2/3/4/7/9 engine to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. They are ideal for LS2/3/4/7/9 motor conversions and are compatible with the PCM harness in LS1/LS6 vehicles. Additionally, they include a knock sensor extension, which allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2-series block, using the factory LS1 engine harness. The Caspers Electronics knock sensor wiring harnesses with LS1 cam sensor adapter have the correct length and thermal protection required when routing near hot engine components.
( 5 )
$55.99
On Sale
Summit Bucks
Mishimoto Ignition Coils
The basic requirements for a properly running engine are fuel, air, compression, and spark. A weak spark from your ignition system can result in misfiring under high-load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto ignition coils are high-quality replacements that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. They are designed and tested to meet or exceed OEM performance standards and are available as a single coil or in sets. Once installed with a set of new spark plugs, you can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance. The primary frame of Mishimoto coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high-temperature environments, while a precision lower rubber boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. Each coil is pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Swap out your worn or defective factory coils with Mishimoto's ignition coils, and as with all their products, the coils include their signature Mishimoto Lifetime Warranty. Choose the ones designed for your vehicle in the quantity needed.
Not Yet Reviewed
$60.95
$54.64
JMS Chip MAF Harnesses
Need to extend or adapt your MAF wire harness in your vehicle? Simply use JMS Chip MAF harnesses! They're a great plug-and-play option, so MAF relocation anywhere is not a problem. These harnesses use OE-quality plugs and are direct plug-and-play extension harnesses designed to provide a quick and clean installation--no cutting or splicing wires is required.
( 2 )
$59.75
ICT Billet Remote Mount Ignition Coil Relocation Brackets
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$87.99
Taylor 409 Pro Race Spiro-Wound 10.4mm Spark Plug Wires
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$78.83
—
$94.69
Summit Racing™ Ignition Coil Wiring Harnesses
Summit Racing™ ignition coil wiring harnesses can facilitate a hassle-free connection of the coil to the wiring harness. That means no more cutting or splicing wires! These adapter harnesses are made from quality material for lasting durability—and they include all the necessary connectors to provide a fast, effortless installation. Order the model recommended for your application.
( 12 )
$67.99
Wiring Specialties Oxygen Sensor Extension Harnesses
Wiring Specialties oxygen sensor extension harnesses make it simple to lengthen your O2 sensor wiring harness. Modifications like long tube headers or turbo kit upgrades could mean your O2 harness will be too short. Wiring Specialties has a safe, reliable solution with these easy-to-install extensions. High temperature adhesive tubing seals connections against moisture and heat. Wiring Specialties uses Hilec fireproof fiberglass sleeve to protect against high heat applications. Choose the plug style needed for your vehicle application.
( 17 )
$65.00
Proform LS Ignition Coil Brackets
Proform LS ignition coil brackets are designed to mount your ignition coil packs up and off the Proform LS valve covers so that you can view the beautiful Chevrolet logo. They are a unique rail mounting system that directly attaches to the threaded holes on the Proform LS valve covers, and the individual coils attach to the rail so that they can be mounted in multiple positions.
( 16 )
$58.99
Painless Performance Ignition Coil Wiring Harnesses
Painless Performance ignition coil wiring harnesses are backed by over 30 years of wiring solutions that are rigorously tested. These replacement harnesses are crafted with the highest quality wires and are color-coded and assembled with weathreproof connectors to make your wiring project, well … Painless!
( 3 )
$63.99
—
$77.99
Taylor Spiro-Pro Spark Plug Wire Sets
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 666 )
$71.99
—
$89.10
Taylor ThunderVolt 8.2mm Spark Plug Wire Sets
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 659 )
$77.89
—
$96.00
On Sale
MSD 6LS Series Ignition Wiring Harnesses
MSD 6LS Ignition harness allow you to easily connect the 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. MSD's 6LS extension harness allows you to reach the front-mounted cam sensor on an early (24-tooth trigger wheel) LS2 when installing a 6LS Ignition Controller. The 6LS-2 Controller allows you to map a timing advance curve with MSD's easy-to-use Pro-Data+ software.
Not Yet Reviewed
$149.95
$84.61
ICT Billet MAF Harness Extensions
ICT Billet offers MAF (mass airflow) harness extensions in a variety of lengths and configurations. They're made with OEM tooling, OEM Delphi connector, lock seals, and terminals—and utilize factory harness wire colors. Don't chance a poorly running engine due to cheap wire connectors; choose the quality of ICT Billet MAF harness extensions.
Not Yet Reviewed
$65.99
Clearance
Philadelphia Racing Products Coil Mounting Brackets
Philadelphia Racing Products has done it again with their newly designed LS coil mounting brackets. These brackets are engineered to fit LS1, LS2, LS6, LS7 engines, and will fit MSD coils. Each bracket is designed to be remote mounted, and comes complete with stand-offs for easy removal. Brackets are CNC-machined out 6061 billet aluminum. The stands are clear anodized and brackets are black anodized for a great finishing touch and corrosion protection. Kits come complete with stainless hardware for mounting.
Not Yet Reviewed
$140.99
$98.50
FAST FireWire Spark Plug Wire Sets
With a rating of 25 ohms per foot, FAST FireWire spark plug wires are a whopping 37 percent more efficient than the nearest competitor. These premium-grade, double-layer, silicone-insulated wires offer unsurpassed resistance to heat and damaging fluids and enhanced protection against high-voltage breakdown. They are also ideal for street use, as their KEVLAR®-reinforced "reactive core" design filters out RFI and EMI noise that affects sound systems. Additional features include: * Unique reactive-core engineered to deliver maximum spark-gap energy to your spark plugs with today's high-output competition ignitions * Filter out RFI and EMI (RFI/EMI pulsings confuse onboard engine control computers, audio systems, and other electronic devices) * Very low 25 ohm resistance ensures maximum spark-gap energy is delivered to the spark plugs * Complete, assembled, and ready to install!
( 12 )
$71.95
ICT Billet Wiring Connectors
ICT Billet has your engine swap covered with their ECM wiring connector kits. These terminals, retainers, and connectors are all designed to work with OE sensors and factory connectors for the easiest installation possible! This is one area that you don't want to use poor quality components—which are subject to crimps, twisting, and unseated terminals. If the wiring has conductivity issues, your engine will run poorly, and the problem is hard to diagnose. ICT Billet has built its reputation on dependable, high-quality parts. Order the kit preferred for your application.
Not Yet Reviewed
$58.99
Wilson Manifolds Throttle Position Sensors
Wilson Manifolds throttle position sensors are Ford-style components used on 4-barrel style throttle bodies and all single-bores, except for LS1, LS6, and LSX. Wilson Manifolds offers these throttle position sensors with GM or Ford-style connector ends.
Not Yet Reviewed
$81.60
Bosch Premium Original Equipment-Type Oxygen Sensors
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 178 )
$54.99
—
$73.99
Delphi MAP Sensors
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 20 )
$86.99
Denso Oxygen Sensors
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 95 )
$50.99
—
$62.99
Delphi Ignition Control Modules
With Delphi's knowledge of OEM protocol, their ignition control modules are engineered using superior materials to improve your vehicle's performance with the benefits of greater throttle response, smoother idle, and full power output at high rpm. Delphi ignition control modules are quality, direct fit OEM replacements available for a range of applications. For improved ignition performance, spark it up with Delphi!
( 16 )
$85.99
Granatelli Motor Sports Spark Plug Wires
Granatelli spark plug wires utilize an exclusive solid stainless connector cable with stainless snap-lock spark plug connectors and a patented EMI/RFI protection ring. This helps them exhibit near 0 ohm resistance, with RFI/EMI outputs less than OE. These kits increase power to the spark plug by up to 25 percent over stock, and their high-temperature silicone boots resist temperatures of up to 500 degrees F. They're ideal for use with aftermarket headers and turbocharger systems, and installation is as easy as changing the factory units. The assembled wires are engineered to exceed OEM specifications and to be OBD-II computer safe. Order the set designed for your vehicle application.
( 56 )
$78.86
Granatelli Motor Sports MPG Plus Spark Plug Wires
Increase your miles per gallon by up to 15 percent with a set of these Granatelli Motor Sports MPG Plus spark plug wires. They feature zero Ohms per foot of resistance and a solid stainless steel inner core for maximum conductivity. The wires provide faster engine startup and a smoother running engine, as well as increased horsepower and torque. Go green and install a set of Granatelli Motor Sports MPG Plus spark plug wires on your daily driver or high performance vehicle.
( 13 )
$78.86
Standard Motor Ignition Coils
Don't take chances with old or questionable ignition coils that can leave you stranded. Standard Motor replacement ignition coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're offered in a variety of styles, such as coil pack, canister, and E-core; and these direct-fit coils are available to replace a wide range of factory part numbers/applications.
( 83 )
$92.97
