Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
347 Results Found For "Systems"
Showing In Stock Items. Show All 501 Items.
Holley Trans-Brake Input Protection Modules
Holley trans-brake input protection modules allow for an ECU input to be safely connected directly to the 12 V side of the trans-brake solenoid. They are designed to protect the ECU input from damaging fly-back voltage, which occurs when the trans-brake is released. Not using one of them will cause damage to the ECU over time.
( 4 )
$60.75
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses
Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.
( 2 )
$59.95
—
$86.95
Summit Racing™ Volt Max X-TREME Spark Plug Wire/Cap and Rotor Kits
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$53.98
—
$91.98
Holley EFI Sensor Blocks
Holley EFI sensor blocks provide a clean and safe solution for mounting multiple 1/8 in. NPT pressure sensors. Rigidly mounting pressure transducers to your engine is never a good idea. Holley EFI sensor blocks are a better idea. Features include: * Compatible with all transducers that utilize 1/8 in. NPT male threads and 7/8 in. or smaller body/hex diameter * Four independent ports, each with three inlets/outlets, allows for the remote mounting of transducers which eliminates inaccuracies due to vibration and heat * Improve engine bay organization by mounting transducers all in one easy to reach location * Four mounting holes designed for the use of 5/16 in. socket head cap hardware for secure and robust mounting * Crafted from military grade 2024 aluminum * Optimized design weighing only 0.50 lbs. * Anodized black for durability and laser-etched with the Holley EFI logo
( 3 )
$67.49
FiTech Throttle Body Fuse Boxes
FiTech throttle body EFI fuse boxes plug in between the ECU's main harness from the throttle body and the user side harness. The fuse and relay box allows for a 30 in. lead from the throttle body. Need a replacement? Choose genuine FiTech components to keep your throttle body performing its best.
( 1 )
$54.00
FAST XFI Qwik Tune Calibration Selector Switch Kits
FAST Qwik Tune calibration selector switch kits feature the XFI ECU and the ability to store up to four calibration files that you can select from on-the-fly by simply pressing a button. Multiple calibrations can be used for different fuels, nitrous oxide systems, and driving conditions. Wiring in the "flash enable" input will allow them to double as flash-mode switches. Get the performance setup you want, when you want it, with an assist from FAST Qwik Tune calibration selector switch kits.
Not Yet Reviewed
$50.95
Edelbrock LS Pro-Flo 4 EFI Harnesses
Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.
( 3 )
$90.95
Dorman Lane Departure Warning Actuators
If you're no longer getting lane departure warnings from the seat cushion, Dorman lane departure warning actuators are an ideal replacement to restore full functionality to the lane departure warning system. These direct replacement seat actuators turn-off the error warning caused by the failure of the original part. The seat actuators have a durable construction and feature original style electrical connector plugs for an easy plug-and-play installation; no wiring modifications are required. This Dorman product has undergone life-cycle quality testing to ensure a proper fit and performance.
Not Yet Reviewed
$61.95
Ron Francis Wiring 70 Amp Single Electric Fan Relay Systems
Do you have a high performance cooling fan on your street rod, off-road machine, or custom vehicle? If so, then these Ron Francis Wiring 70 amp single electric fan relay systems are just what your vehicle needs to keep cool. Available in several sensor configurations, the 70 amp single electric fan relay systems feature a relay, Maxi fuse, and all of the necessary wires for a complete installation. These Ron Francis Wiring 70 amp single electric fan relay systems are sure to keep your engine operating at a cool and efficient temperature.
( 22 )
$58.75
Kleinn Sniper Remote Control Air Horn Activation Systems
Kleinn Sniper Remote Control Air Horn Activation Systems feature a wireless button that activates air horns from a distance of more than 200 feet away from your vehicle. Imagine the possibilities of an unoccupied vehicle—suddenly and unexpectedly creating earth shattering noise all by itself! The Sniper assures that honking your air horns will never be the same. In short, it's a safety feature that will bring you peace of mind. These remotes are easy to install, and they come with two Kleinn logo laser-etched remote control transmitters, the receiver, necessary wiring, and installation instructions. The kit is compatible with any air horn system that uses a momentary button and electric solenoids.
( 1 )
$69.95
Altronics O2 Alert Warning System Cables
Make sure that you get accurate readouts with Altronics O2 alert warning system cables. They'll help you stay properly connected to your Altronics O2 alert warning system for quick-response, accurate readouts. The ends of the cables come bare and include both male and female connectors for hookup.
Not Yet Reviewed
$99.99
NOS Solid State Relays
NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps
( 14 )
$94.75
On Sale
Racepak Liquid Temperature Sensors
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with V-net modules and require the adapter harness.
( 2 )
$92.19
NOS Billet Microswitch Bracket Kits
NOS billet microswitch bracket kits eliminate flexing or bending, allowing for consistent activation of your nitrous system every time. The billet brackets feature a laser-engraved NOS logo and a black anodized finish. Order the kit recommended for your carburetor application.
( 13 )
$51.19
—
$90.15
Racepak V-Net Tee Cables
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$71.69
—
$84.85
ZEX Boost Activated Nitrous Switches
ZEX boost activated nitrous switches are excellent for use where a manual activation switch is inconvenient, or as a safety device to prevent the nitrous system from activating until you're at full boost. They're also great for use in duel or multi-stage systems.
( 3 )
$57.95
Racepak V-Net 5-Pin Cables
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$87.05
—
$97.35
Racepak Serial Communications Cables
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$76.85
Racepak SD and Micro SD Components
Racepak SD and micro SD components allow you to save and read on a PC all the important data you've recorded with your data logger. This will help you more easily make the changes necessary to improve the performance of your vehicle. For all your SD and micro SD component needs, Racepak Data Systems has you covered.
Not Yet Reviewed
$51.19
NOS Electrical Accessories
NOS offers a complete line of electrical accessories for wiring your nitrous system. From relays to switches, they offer all of the products you need for safe and simple wiring.
( 2 )
$61.45
Racepak IQ3 Mount Brackets
Attach your Racepak IQ3 display dash with ease, using a Racepak IQ3 mounting bracket. These sleek looking dash brackets allow custom mounting within your gauge cluster area. They are CNC-machined from aluminum, black anodized, and pre-drilled for corresponding IQ3 mounting stud and pattern.
( 2 )
$71.69
Clearance
Racepak V-Net Modules
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$108.95
$69.50
Racepak UDX Street Rod Harnesses
Racepak offers replacement connectors and wiring harnesses for the UDX Street Dash data logging system. Ensure that your automotive functions are monitored and displayed properly. Replace faulty wiring with a new harness from Racepak Data Systems.
( 1 )
$62.95
Racepak IQ3 Remote Buttons
Racepak IQ3 remote buttons connect to the IQ3 digital dash via the harness—to program and advance through the data logging screens. These accessories are invaluable to your IQ3 system.
Not Yet Reviewed
$61.45
